Latest blower scrap Tenders | Government blower scrap Tenders

Central Government And Public Sector

CTN :40581326

24 Jun, 2025 NA

West Nimar - Madhya Pradesh

Tender For supply of hermetic compressor, capacity 2.0 tr, 1 phase, 230 v+ - 10% , 50hz suitable for refrigerant r22 , reciprocating compressor 1.5 tr, phase, 230 v+ -10% , 50hz suitable for refrigerant r404a , motor with fan blade motor capacity 1/4 hp 187w rpm 920 1 phase fan blade dia 20" suitable for blues , motor with fan blade motor capacity 1/10 hp 1 phase 230+ -10% volts, 900 rpm, fan blade dia-16" suita , blower and motor with rubber bush, for 2 tr in door unit, motor- (230v+ -10% , 1 ph, 50hz) watts-75 , pcb for bluestar tower ac cap 4.5 tr, idoor unit model no. mfs2-54cr, cooling capacity 54000 btu/h

CTN :40604376

25 Jun, 2025 NA

Kolkata - West Bengal

Tender For supply of blower motor with fan for 2.2 tr prag polymer make 3 phase emu cab ac part no.0107012 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40578319

23 Jun, 2025 9.99 Lacs

Ganjam - Odisha

Tender For annual rate contract for spares of air conditioners - capacitor running 2.5 mfd (ac), capacitor running 3.0 mfd (ac), capacitor running 4.0 mfd (ac), capacitor running 6.0 mfd (ac), capacitor running 45 mfd (ac), capacitor running 50 mfd (ac), capacitor running 55+4 mfd (ac), capacitor running 60 mfd (ac), capacitor running 60+4 mfd (ac), brass flare nut 1/2 (ac), brass flare nut 1/4 (ac), brass flare nut 3/8 (ac), brass flare nut 5/8 (ac), copper pipe 1/2 (ac), copper pipe 1/4 (ac), copper pipe 3/8 (ac), copper pipe 5/8 (ac), nitrile rubber insulation 1/2 (ac), nitrile rubber insulation 1/4 (ac), nitrile rubber insulation 3/8 (ac), nitrile rubber insulation 5/8 (ac), brass liquid line valve 1/2 (ac), brass liquid line valve 1/4 (ac), brass liquid line valve 3/8 (ac), brass liquid line valve 5/8 (ac), welding stick (ac), wrapping tape (ac), copper coil condensing for 1.5 ton split (non inveter ac), copper coil condensing for 2.0 ton split (non inveter ac), copper coil condensing for 1.5 ton (split inverter ac), copper coil condensing for 2.0 ton (split inveter ac), compressor for 1.5 ton (split ac) - r22 gas, compressor for 2.0 ton (split ac) - r22 gas, compressor for 1.5 ton (split ac) - r32 gas, compressor for 2.0 ton (split ac) - r32 gas, compressor for 1.5 ton (split ac) - r410 gas, compressor for 2.0 ton (split ac) - r410 gas, compressor for 1.5 ton (split inveter ac) - r32 gas, compressor for 2.0 ton (split inveter ac) - r32 gas, compressor for 1.5 ton (split inveter ac)- r410 gas, compressor for 2.0 ton (split inveter ac) - r410 gas, outdoor dc motor for inverter ac, universal/suitable pcb for 1.5/2.0 ton (split ac), universal/suitable pcb for 1.5/2.0 ton (inverter split ac), refrigerant gas r-22 (ac), refrigerant gas r-32 (ac), refrigerant gas r-410 (ac), lpg gas welding can (ac), condenser coil cleaner (ac), fan blade odu 1.5 ton (split ac), fan blade odu 2.0 ton (split ac), indoor unit blower assembly 1.5 ton (split ac), indoor unit blower assembly 2.0 ton (split ac), indoor unit motor 1.5 ton (split ac), indoor unit motor 2.0 ton (split ac), outdoor unit motor 1.5 ton (split ac), outdoor unit motor 2.0 ton (split ac), indoor unit swing motor (ac), outdoor unit electrical contactor (ac), compressor thimble (ac)

corporations/Associations/Others

CTN :40579549

07 Jun, 2025 NA

Multi City - Multi State

Tender For auction sale of bhubaneswar_scrap aluminum cable cut piceac/copper cable,bhubaneswar_scrap gi armoured wire,bhubaneswar_scrap exhaust fan-iron,bhubaneswar_scrap ht meter/rtcc panel/changeover panel/blower fan iron/charger,bhubaneswar_scrap lightning arrester-iron mix/33kv &kv pt do fuse-iron mix,bhubaneswar_scrap bus coupler-iron & aluminium,bhubaneswar_scrap rusted iron/empty iron panel/ac empty outdoor/tin/p.waste

CTN :40266807

05 Jun, 2025 NA

Leh - Jammu And Kashmir

Tender For bid to ras supply of generator spare - armature outer brg , avr plate , cylinder bone , cylinder assy with inlet and exhaust valve , push rod , push tube , fuel feed pump with fuel filter assy , fuel rerurn adapter , fuel pipe , injector assy , piston ring set std , piston , tapped cover , rocker , head gasket , benjo bolt 19 x 19 , benjo bolt seem 19 x 19 , cylinder head assy with inlet and exhaust valve , fly wheel gear 121 teeth , fuel filter assy , fuel pipe line 19x19 , oil pipeline , oil filter , push tube seal , air filter , push rod , push tube o ring , push rod tube with spring , main oil seal , injector , engine packing kit , cyl linear , banjo washer 17 and 19 inch , blower assy , cell , connecting rod , cyl head , dynamo belt , fan belt , fip fuel returning pipe , fuel filter , fip two cyl , fuel injection pump , fuel pipe tank to pump , fuel pipe line flexible 19 x 17 , over hauling gasket , over flow pipe , pistion ring set , push rod seal lower , push rod seal upper , rocker arm assy , rocker assy bolt , sleeve cyl assy , single element fuel pump or fip , alternator assy , alternator assy with ac 230v , alternator , benjo washer 17 and 19 inch , bty 120 ah , cr brg cell or small bearing , cyl head with valve , cylinder head with inlet and exhaust valve , cylinder head gaskit , cylinder head mounting nut , fuel pipe line tank to feed pump , fuel pipe line feed pump to fip , fuel filter or water saparator , fuel fitter primary , fuel fitter secondary , fuel return pipe , injectors , over flow pipe line , pistion assy , pistion ring , tappet gasket , tappet cover , turbo charger , alternator assy 230 v , benjo nut , cells , fip , crank shaft cell , cylinder head assy , fuel fitler returning , fuel pipe line tank to feed pump , hexa bolt m3 x 45 b 10 , hex bolt m8 x 1 , hose steel pipe to turbo charger air inlet , hose clamp , injector nozzle , inlet rocker arm assy , piston ring std , piston ring set , rotary pump , radiator assy , self starter assy , mounting pad , avr , air cleaner , cr cell std , exhaust manifold gasket set , inlet manifold gasket set , push rod seal set , rocker arm assy intlet and exahust , self starter , tappet cover gasket set , solenoid switch , big end brg or main bearing cell , connecting rod assy , crank shaft , cyl head assy , fuel feed pump , fuel filters , fuel line pipe , diesel hose pipe , overflow pipe , push rod seal , push rod tube upper and lower , rocker pin

CTN :40568261

23 Jun, 2025 NA

Barmer - Rajasthan

Tender For supply of leaf blower , farmic brush cutter , mist fan , pedestal fan , table cloth , digital blood pressure monitor , nebulizer machine , pules oximeter

State Government

CTN :40149413

18 Jun, 2025 8.68 Lacs

Mahisagar - Gujarat

Tender For corrigendum : supply of flame proof led, various spray, various consumable & electrical items at khep - multi functional fluid spray oks-601, multifunctional fluid spray oks -451, carbon cleaner spray, rust remover wd 40, 400 ml / bottle, complete flame proof led light fixure with glass having light equivelent to 125 w hpmv conventional fitting, megger for insulation testing having capacity5 kv along with p.i. facility, voltage input range: 85-265 v, 50/60hz,current measurement range: (+ & -) 0.01 na to (+ & -)5 ma, test regimes: auto ir, pi, dar, sv and dd., pedestal fan, size 450mm (18-inch) ,rpm-1440,1-phase,3-speed, 230 volt,100 watt with regulator., wolf make air blower, rccb,240v ac, 32/40 amp, 2 pole, sens:30ma ,mounting- din rail, switch socket combined 6 & 16 amp.anchor make, electical saftey equipment tester taparia product no:814 voltage range:110v to 230v, taparia tester 818, fuse puller, bearing puller , 12 inch , 3 legs, bearing puller , 8 inch , 3 legs, grease gun, emery cloth roll coarse size 50 mm x 50 meter x 400 grit, emery paper smooth fine size 38 mm x 50 m length

State Government

CTN :39952911

11 Jun, 2025 8.90 Lacs

Sarni - Madhya Pradesh

Tender For corrigendum : procurement of various sizes of bearings below 80 mm category critical ( b) for various auxilliaries for ahp-iv unit no. 10 and 11, stps sarni. - procurement of various sizes of bearings below 80 mm category critical ( b) for various auxilliaries for ahp-iv unit no. 10 & 11, stps sarni., bearing no. 3313c3 for botp (transfer pump), bearing no. 7310b for seal water pump, bearing no n- 308 for seal water pump, bearing no. 6313 c3 for clear water pump, bearing no. 3311-8d for fadp, bearing no. 33213 for ash slurry gear box, bearing no. 7309 for rotary drum, bearing no. 6312 for vent fan, bearing no. 6314-c3zz for 500 pst fcu, bearing no. 6014 2rs loop pump, bearing no. 32312 for agitator, bearing no. 32314 for agitator, bearing no. 32313 for agitator, bearing no. 3213 c3 for silo blower, bearing no. 6213 c3 for silo blower, bearing no. 22213 e1 for silo blower, bearing no. 6414 for paddle mixture, bearing no. 6315 for paddle mixture, bearing no. 7314 for charge pump, bearing no. nu-314 for charge pump, bearing no 33206 1st stage of c/g gear box, bearing no 32307 of c/g gear box, bearing no 32007 of c/g gear box, bearing no 22214 sph of c/g gear box, bearing no n-309 dcw pump, bearing no 3309 rcw pump, bearing no nu-209 fcu of c/g, bearing no n-312 hp water pump, bearing no nj-314 esp blower, bearing no. 7311 for recovery water pump, bearing no. ucfc-212 rotary feeder

Central Government/Public Sector

CTN :40310163

06 Jun, 2025 NA

Thane - Maharashtra

Tender For corrigendum : supply of kitchen equipments - dosa bhati , s.s 304, 16 gauge, size 26"x48"x34" top 4" matte , finish , double burner chulla , specification: , s.s 304, 16 gauge, size 24"x54"30" top 8" matte finish , single burner chulla , specification: , s.s 304, 16 gauge, size 34"x34"38" matte finish , tandoori bhati , specification: , s.s 304, 16 gange, size 24"x24"x25" matte finish , hood with filter dosa range , specification: size 52x30x28 , hood with filter idli steamer , specification: size 48x30x28 , hood with filter 2 burner range , specification: size 72x30x18 , hood with filter 2 burner range , specification: size 72x30x18 , hood with filter 2 burner range , specification: size 54x30x18 , hood with filter tandoor range , specification: size 72x30x18 , ata dough machine , specification: , s.s 304, capacity 25 kg. best brand motor and , hardware , dough machine , specification: , size 25kg capacity , cold storage room , specification: , brand blue star room size 101"x109"x84" , 60mm puff panel with pub slab in floor, inside s.s and outside ppgi with 1000 btu machine with installation, evaporators is s.s casing with r 404a pvc strip curtain, standard outdoor stand with 20 feet copper piping , cold storage room , supplying and installing blower fan for exhaust heavy luty motor hindustan make 3 phase 7.5 hp , cold storage room , supplying and installing blower fan for fresh air heavy futy motor hindustan make 3 phase 5 hp, mixer table , specification: , s.s 304, 16 gauge, size 26"x36"x34" top 4" matte , finish , sink table , specification: , s.s 304, 16 gauge, inside size 18"x18"x12" outsize size 24"x24"x30" back top 4"matte finish , ss work table with 2 u/s , specification: size 52x24x34+6 , ss overhead self upper table , specification: size 52x12x16+16 , ss work table with 2 u/s , specification: size 52x24x34+6 , ss work table with 2 u/s , specification: size 66x24x34+6 , ss overhead self upper table , specification: size 66x12x16+16 , ss work table with lhs sink , specification: size 60x24x34+6 , ss masala trolley with castor wheel , specification: size 36x24x34 , ss 2 sink unit , specification: size 48x24x34+6 , ss tandoor gas operated , specification: size 34x34x39 , ss tandoor side table , specification: size 24x34x39+6 , ss work table with 2 u/s , specification: size 54x24x34+6 , ss work table with 2 u/s , specification: size 42x24x34+6 , ss pickup table with 2 u/s , specification: size 60x36x34+6 , ss overhead self , 60x12x16+16 , ss heavy duty pilot , specification: size 57x40x6 , ss storage rack 5 self , specification: size 47x24x72 , ss pot rack , specification: size 54x24x72 , ss onion potato bin , specification: size 48x24x38 , ss storage rack 5 self , specification: size 52x24x72

Central Government/Public Sector

CTN :40575314

09 Jun, 2025 NA

Hubli - Karnataka

Tender For pac item: supply, installation, testing and commissioning of two stage gas burner max gas 350 pab tl (two stage) (blast tube length 335 mm) complete with maximum inlet pressure of 300 mbar a nd for lpg firing at a maximum inlet pressure of 200 mbar with the following accessories: 1) burner with bl ast tube 2) combustion head 3) mounting flange with gasket 4) blower with fan and motor, 5) safety contr ols 6) ignition transformer and electrodes & cables 7) burner controller with base 8) flame sensor (ionizatio n probe) 9) gas train (dung?s multiblock mbzrdle 405) complete with: n degree 1 electronic safety valve class a, n degree 1 electronic adjusting valve class a, n degree 1 min gas pressure switch n degree 1 inbuil t gas governor 10) air pressure switch 11) standard control panel 12) firing head setting device as per tec hnical specifications attached. makes/brands: m/s. stg heating pvt. ltd. only. note: 1) the firm should su bmit an oem certificate or an authorized dealership certificate or proof of purchase from oem or dealer an d necessary test certificates along with materials for acceptance. [ warranty period: 30 months after the date of delivery ]

Blower Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

corporations/Associations/Others

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector