Latest blowpipe Tenders | Government blowpipe Tenders

corporations/Associations/Others

CTN :45504488

18 Jun, 2026 54.8 Thousand

Delhi - Delhi

Tender For dismantling and shifting of electrical equipments with associated material from rsu lajpat nagar-3 to t.e. bldg. okhla, mtnl, new delhi - dismantling, loading, unloading, transportation, shifting of old silent type dg set of capacity 63 kva, silent canopy, silencer, exhaust pipe, panels, power cables, battery chargers, batteries, diesel tanks and all other accessories i/c ducting, disconnection of supply cable i/c shifting from rsu lajpat nagar-3 to te bldg. okhla (and re-assembling the same i/c canopy at new site) as per the directions of engineer in charge etc complete as required., dismantling, loading, unloading, transportation and shifting from rsu lajpat nagar-3 to te bldg. okhla of following electrical equipments etc. complete as required.a) 94.5 kva avr with avr bypass panel, b) lt panel, c) capacitor panel, d) power room panel, e)7.5 tr ductable ac units complete with indoor/ outdoor units, f) ac panel, g)focus lights/emergency lights, h) mccb 100/200/250a with mccb box, i) fire detection and alarm system with fire panels, detectors, ri, mcp and hooters, fire cylinders ,buckets and all accessories, j) various sizes copper/ aluminium conductor electrical cables, k) cable runway trays, l) air circulator/exhaust fan/wall fan/ceiling fan/ac fresh air fan, m) 1x40 w/ 2 x 40 w tube light fittings/ halogen light / bulk head/ cfl fittings (approx 20 nos.), n) 100/200/250/400 amp. changeover switch with adopter box, o) ac copper pipes, p) tpdb/spdb 8 way/12 way with mcbs/isolators and adopter boxes, q)power protection box/alarm box/contactor box, dismentalling of burnt out/unserviceable material and shifting from rsu lajpat nagar-3 to te bldg.okhla i.e. ac drain pipes, ac condenser frames , water motor, air curtain,gi earth strip, single core copper wiring, conduit pipes, ms boxes, power point boxes, computer point boxes, switches, sockets, old tube lights, slotted angle pieces,fitting louvers, gi duct pieces, duct insulation,angle iron supports i/c removing from wall/surface etc. as per the directions of engineer-in-charge.

Central Government/Public Sector

CTN :45532362

03 Jul, 2026 45.00 Lacs

Bhuj - Gujarat

Tender For certain repair to water supply distribution lines and other connected items at mil stn bhuj and gandhidham under ge (a) bhuj - taking up u/s ci /di/ac water main (incl all fitting) with spigot & socket /ms pipe or any other type of pipe or lead joint incl burning out joint & recovering lead from pipe of 400 mm bore for laying /rerouting of serviceable pipe after cleaning complete all as specified and as directed., all as per item 1 above but 250 mm dia bore complete all as specified and as directed., all as per item 1 above but 200 mm dia bore complete all as specified and as directed., all as per item 1 above but 150 mm dia bore complete all as specified and as directed., all as per item 1 above but 100 mm dia bore complete all as specified and as directed., material and labour di pipes of size 400 mm bore with spigot and socket end centrifugally cast class "k- 9" , in any length laid in trenches/on surface/ over masonary pillar and connection to old or new position complete all as specified and as directed., all as per item 6 above but 250 mm dia bore complete all as specified and as directed., all as per item 6 above but 200 mm dia bore complete all as specified and as directed., all as per item 6 above but 150 mm dia bore complete all as specified and as directed., all as per item 6 above but 100 mm dia bore complete all as specified and as directed., material and labour di pipes of size 200 mm bore with spigot and socket end centrifugally cast class "k- 7" , in any length laid in trenches/on surface/ over masonary pillar and connection to old or new position complete all as specified and as directed., all as per item 11 above but 150 mm dia bore complete all as specified and as directed., all as per item 11 above but 100 mm dia bore complete all as specified and as directed., m&l di bend any type radius and angle tapers any type straght bend increacing decreacing or double socket etc) tee pipe single branch y juction double branch cross(all socket and spiogat collars caps and plug for the pipe socket & spiogat of the following size 250 upto 400 mm dia complete all as specified and as directed., all as per item 13 above but upto 80 to 200 mm bore complete all as specified and as directed., m&l for run laid laid joint for ci pipe of size 100 mm bore complete all as specified and as directed., m&l for run laid laid joint for ci pipe of size 150/200 mm bore complete all as specified and as directed., m&l for ruber gas ket joint/ tyton joint for ci / di pipe of size 250 to 400 mm bore complete all as specified and as directed., m&l for ruber gas ket joint/ tyton joint for ci / di pipe of size 80 to 200 mm bore complete all as specified and as directed., taking down carefully cast iron sluice valve of size 250 mm bore from ci water mains, dismantling parts and reassembling, replacement of brass spindle for sluice valve, class pn 1.0, and repacking stuffing box of sluice valve spindle, refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc complete all as specified and as directed., taking down carefully cast iron sluice valve of size 200 mm bore from ci water mains, dismantling parts and reassembling, replacement of brass spindle for sluice valve, class pn 1.0, and repacking stuffing box of sluice valve spindle, refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc complete all as specified and as directed., taking down carefully cast iron sluice valve of size 150 mm bore from ci water mains, dismantling parts and reassembling, replacement of brass spindle for sluice valve, class pn 1.0, and repacking stuffing box of sluice valve spindle, refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc complete all as specified and as directed., taking down carefully cast iron sluice valve of size 100 mm bore from ci water mains, dismantling parts and reassembling, replacement of brass s

State Government

CTN :45447740

22 Jun, 2026 24.67 Lacs

Mehsana - Gujarat

Tender For corrigendum : drilling 200 and 250 mm dia up to 300 meters (total 05 numbers) deep tube wells by dr / rr drilling rig at various villages in vijapur vadnagar kheralu and satlasana talukas (group a) of mehsana district including supply of various type of ms bore materials and slotting work of ms erw pipes

corporations/Associations/Others

CTN :45532876

27 Jun, 2026 NA

Kolkata - West Bengal

Tender For renovation and replacement of damaged and worn out spare parts with new ones for sludge pump-1 with ancillary works at wtp-iv, garden reach water works.- manufacturing, supply & delivery of pump - shaft made off ss-316 for 647 cum/hr., 15 mtrs head sludge , pump with necessary keys etc, as per sample at garden reach water treatment plant., , manufacturing, supply & delivery of shaft -sleeve, , made of ss-316 for 647 cum/hr., 15 mtrs head sludge, , pump as per sample at garden reach water, , manufacturing, supply &delivery of casing ring made of nici for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , manufacturing, supply &delivery of split gland made of nici for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant, , manufactering, supply delivery of baaring housing made of nici for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , manufactering, supply delivery of lock nut of impeller made of ss for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , manufactering, supply & delivery of lock nut of bearing made of ss for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , balancing of rotating assembly of 647 cum/hr., 15 mtrs head sludge pump including loading, unloading and transportation from and to at garden reach water treatment plant, , total rotating assembly & keep it at a suotable place after opening the top cover of pump unit. dismantling the bearing housing at both end & as per direction of eic., , manufacturing, supply & delivery of impeller made of nici for 647 m?/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant, , manufacturing.. supply delivery of bearing housing cover (d.e side) made of nici for 647 m?/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant, , manufacturing, supply &delivery of bearing housing cover (n.d.e side) made of nici for 647 m?/hr., 15 mtrs head sludge pump as per sample at tp-1, grww. garden reach water treatment plant, , manufacturing, supply &delivery of supporting foot made of nici for 647 m?/hr., 15 mt head sludge pump as per sample at garden reach water treatment plant., , m.s plate as per is: 2062-2011/latest revision, make: sailitataijindal (b) above 2 mm upto 10 mm thickness, , fabricating m.s. specials of different diameter in shop out of 8 mm to 12 mm thick m.s plates supplied depart-mentally, cutting the plates to exact size & shape by gas cutting device and/or by adopting any other approved type of mechanical means, bending the same in true curvature by template and rolling machine of approved design including proper marking, levelling joints followed by electric arc welding - longitudinal and circumferential, as necessary, using standard electrodes as per i.s.specification including edge preparation, electricity charges and hydraulic testing of the fabricatedpiece all complete as per specification and direction of the engineer-in-charge. [the engineer-in-charge shall approve the electrodes for are welding before use. fabrication of m.s. flange to form m.s flanged tail piece shall not be considered as m.s. special], , cutting to requisite length or shape departmental r.s. joists, channels, angles, tees, plates etc. (payment to be made on area of cut surface), , welding in m.s. structural work with gas or electric: (a) tack weld, , welding in m.s. structural work with gas or electric: (b) continuous weld., , supply of m.s. flange (slipper type) as per is-6392 table 17 thickness 12mm nb diameter in mm 350, , flange joint to c.i./d.i/ms. pipes and specials including supply of rubber gasket, nuts, bolts, washers etc. of best quality to make the joint watertight at required hydraulic pressure all complete as per specification & direction of the engineer-in-charge. di

corporations/Associations/Others

CTN :45525894

20 Jun, 2026 2.49 Lacs

Parganas - West Bengal

Tender For installation of insulating materials on the street light poles at different places in ward no 111 under br-xi - building works(m) drain, down pipes, chimney etc?.(c). additional rate?(21)supplying, fitting & fixing upvc pipes a- type and fittings conforming to is:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (spun yarn, valamoid/bitumen/m-seal etc) complete.a) upvc pipes: (iii) 160 mm. dia., a n n e x u r e - i basic rate of materials: (all rates of materials from k-1 to k-14 are excluding vat) 158. 40x6mm thick ms clamp on pole upto 100mm dia, a n n e x u r e - i basic rate of materials: (all rates of materials from k-1 to k-14 are excluding vat) 194. 6mm dia rag bolt with nut, sub total, gst 18%, cess 1%

CTN :45415159

17 Jun, 2026 4.58 Lacs

Chandigarh - Chandigarh

Tender For corrigendum : repair and maintenance of tube wells and boosters including repair of water level gauge, ms panel, sluice valves and allied items of civil / electrical at various buildings i.e. punjab raj bhawan, haryana raj bhawan & residence sector-7, under maintennace booth, sector-7, chandigarh. (ch to: 2216 (np) mtc. and repair ) - repair of ci sluice valve up to 150 mm dia including dismantling, repair / replacement of spindle, nut , rubber packing, nuts and bolts complete., up to 100 mm dia, lifting and lowering of submersible pump set including dismantling of flenged joints, taking out column pipes, re-jointing etc including replacement of defective packing, nuts and bolts etc complete, tube well, booster, supplying and fixing of single phase preventor make minilec or equivalent model of approved make to the satisfaction of eic , supplying and fixing of current transformer ( ct ) for ampere meter of suitable rating complete., supplying and fixing of overload relay of following capacities, 14 to 23 amp, 30 to 42 amp, 45 to 75 amp, providing and fixing of star delta starter timer of make l&t or equivalent model of approved make to the satisfaction of eic, providing and fixing of kit kat 500 amp complete in all respect, supplying and fixing of capacitor of 20 to 50 mfd make l&t, siemens or equivalent model of approved make to the satisfaction of eic , supplying and fixing of analog meter of make l&t ( rishabh ) or equivalent model of approved make to the satisfaction of eic , volt meter, ampere meter, supplying and fixing of 3 pole mccb of following capacity of make l&t, bch, havells or equivalent model of approved make to the satisfaction of eic , 100 amp, supplying & fixing of contactors block of make l&t, bch or equivalent model of approved make to the satisfaction of eic , mnx - 25, mnx - 32, mnx - 50, mnx - 70, supplying and lowering of submersible cable 16mm2 of make havells, finolex, l&t or equivalent model of approved make to the satisfaction of eic , supplying and lowering of submersible cable 25mm2 of make havells, finolex, l&t or equivalent model of approved make to the satisfaction of eic , providing and fixing hydro pneumatic pump of size 0.5 hp of approved make with 24 ltr capacity tank, pressure switch, pressure gauge, nrv accessories and making connections complete of make crompton or equivalent model of approved make to the satisfaction of eic, repair and rewinding of submersible pump set including carriage from installation to workshop and back. the rate include replacement of all defective parts of pump and motor rewinding., 5 hp, 7.5 to 10 hp, 35 hp to 55 hp, repair and rewinding of monoblock submersible pumping set including repacement of defective parts as required and carriage from installation to workshop and back., 0.5 h.p, 1 h.p, 2 h.p, manufacturing, supplying and fixing of ms control panel 16 gauge of size 600x700mm with door including wiring of inside panel, complete in all respect, providing and fixing of self pumping monoblock single phase pump for boosting of make crompton or equivalent model of approved make to the satisfaction of eic, 0.5 h.p, 1 h.p, 2 h.p, providing and fixing of pressure gauge make h-guru or equivalent model of approved make to the satisfaction of eic, providing and fixing of elcb 63 amp make l&t/havells or equivalent model of approved make to the satisfaction of eic, repair of internal control wiring 1.5mm wire with thimbles, nut bolt etc. complete

CTN :45531336

19 Jun, 2026 2.87 Lacs

Jaipur - Rajasthan

Tender For special repair and renovation work (i.e. construction of new toilets, aluminium windows, tiles and color) i/c electrical work of msme technology development centre, extension centre, jaipur.subwork/packages:providing and fixing of ms water tank cover, rain water pipes glass door repair etc.

CTN :45084499

17 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For bid to ras supply of construction items rubble field c c - portland cement , coarse sand zone iii , stone aggregate single size 10 mm nominal size , stone aggregate single size 20 mm nominal size , fine sand zone iv , twisted steel deformed bars tmt 10 mm , common burnt clay f.p.s. non modular bricks class designation 7.5 , angle iron frame size 50x50x6mm , ms flat size 50x50x6mm , 12 mm thick marine plywood conforming to is 710 , mild steel sheets of 1.00 mm thickness for tanks , r.c.c. pipes np2 class 900 mm dia length 2.5 mtr

CTN :45523446

16 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For schedule - a 1 (boq 1) water supply pipeline material supply - g.i. pipes "b" class 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i. elbow 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i. bend 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i. coupling 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i.union 20mm, 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i.tee 20mm.g.i, 25mm.g.i, 32mm.g.i, 40mm.g.i, 50mm.g.i, 65mm.g.i, 80mm.g.i, 100mm.g.i, g.i. pipe nipple 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i. hex nipple 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i. plug 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i. reducer 20mm x 15mm, 25mm x 20mm, 32mm x 25mm, 40mm x 32mm, 50mm x 40mm, 65mm x 50mm, 80mm x 65mm, 100mm x 80mm, gate valve isi 3/4", 1", 11/4", 11/2", 2", 21/2", 3", 4", gate valve non -isi 3/4", 1", 11/4", 11/2", 2", 21/2", 3", 4", 50mm cid/f sluice valve, 80mm cid/f sluice valve, 100mm cid/f sluice valve, 50mm ms coupler, 65mm ms coupler, 100mm ms coupler, 20mm single air valve, 20mm double air valve, 40mm double air valve, 15mm ferrule, 20mm ferrule, solvent cement, hot treat oil, yarn, lend wool, cement, g.i. tape 20mm, 20mm waste not tap, 20mm brass bib cock, 40mm brass bib cock, 1" gi length coupling, 11/4" gi length coupling, 11/2" gi length coupling, 2" gi length coupling, 21/2" gi length coupling, 3" gi length coupling, 4" gi length coupling, 1" non return valve, 11/4" non return valve, 11/2" non return valve, 2" non return valve, 21/2" non return valve, 3" non return valve, 4" non return valve, pvc pipes of 6kg/cm2 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc pipes of 4kg/cm2 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc coupler 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc bend 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc end cap 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc mta 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc fta 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc tee 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc saddle fees suitablefor 20mm, 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, super thick pvc pipes 20mm, 25mm, 32mm, 40mm, 50mm, pvc reducers 160x140mm, 140x 90mm, 110x75mm, 75x63mm, 63x50mm, 450mm a.c. pipe, 300mm a.c. pipe, 250 mm a.c. pipe, 150 mm a.c. pipe, 450mm c.i.t. joint, 300mm c.i.t. joint, 250mm c.i.t. joint, 150mm c.i.t. joint, 5" g.i.pipe, 6" g.i.pipe, 7" g.i.pipe, 8" g.i.pipe, 9" g.i.pipe, 10" g.i.pipe, 5" pvc pipe, 6" pvc pipe, 7" pvc pipe, 8" pvc pipe, 9" pvc pipe, 10" pvc pipe, 5x5/8 bolt nut with washer, 3x5/8 bolt nut with washer, 31/2x3/4 bolt nut with washer, 1" steal hex nipple, 11/4" steal hex nipple, 11/2" steal hex nipple, 2" steal hex nipple, 21/2" steal hex nipple, 3" steal hex nipple, 4" steal hex nipple, 11/4"x1" steal reduce hex nipple, 2"x11/2" steal reduce hex nipple, 21/2"x2" steal reduce hex nipple, 3"x21/2" steal reduce hex nipple, 31/2"x3" steal reduce hex nipple, 11/2"x1" steal reduce bush, 2"x11/2" steal reduce bush, 21/2"x2" steal reduce bush, 3"x21/2" steal reduce bush, 31/2"x3" steal reduce bush, 1" long size bore clamp, 11/2" long size bore clamp, 11/4" long size bore clamp, 2" long size bore clamp, 21/2" long size bore clamp, 3" long size bore clamp, 4" long size bore clamp, 8" bore cover, 1"x2 feet pipe nipple, 11/4"x2 feet pipe nipple, 11/2"x2 feet pipe nipple, 2"x2 feet pipe nipple, 21/2"x2 feet pipe nipple, pvc water tank litre, cellak 100 ml pottle