Latest body armour Tenders | Government body armour Tenders

Central Government/Public Sector

CTN :39822931

15 Apr, 2025 NA

Bengaluru - Karnataka

Tender For corrigendum : supply and installation of kitchen equipments for hostel mess at indian institute of science, bengaluru - dry store, ss platform digital weighing scale.ss platform of size 600 x 600mm, power supply - 230v ac, 50 hz, display colour/digit - red/ green/ 6 digits, display size - 0.56" (14.22 mm), number of keys - 5 keys, battery - 6v / 4ah,, mobile ingredient bin mobile ingredient bin with slant top, sliding lid, castors & scoop.37 gal. (140 l) slant top, with scoop, a hygienic clear sliding lid, bins should made of nsf-listed, fda-accepted material, bins has to be designed with a slanted top to easily access product., ss low height platform rack (dunnage rack).38 x 38mm pipe frame structure, 38 x 38mm pipe cross support with a spacing of 70mm, 6 nos leg of 38mm sq. ss legs fitted with adjustable nylon bullet feet., ss storage rack with 4 shelves.18swg ss shelves double beaded on all sides, reinforced with 25 x 100 x 25mm hat channels, dia 38mm ss round legs fitted with adjustable nylon bullet feet., walk in cooler, walk-in cooler, +2 deg c to +8 deg c.unit should be made from 60 mm thick prefab rigid puf sandwich panels with 1mm thick ss 304 grade sheet outside and inside, the cold room should be with ceiling and wall panels interlocked through a cam lock mechanism, fitted with a hermetic sealed compressor. the condensing unit should be split type, which is air cooled. swing type and insulated door having magnetic gasket, safety latch, lock and heavy duty hinges. the room should maintain a temperature of +2 c to +8 c. all accessories like light, light switch, emergency switch, door heater, vacuum release, temperature indicator to be provided with the unit. the refrigerant used should be r 134a. flooring inside the cold room is kottah stone flooring (flooring in client scope)., perforated storage rack with 4 shelves.16swg ss shelves double beaded on all sides with perforation in entire length and width, 50 x 5 mm perforation with a spacing of 15mm, stiffed with 25 x 100 x 25mm hat channels, 38mm ss round legs fitted with adjustable nylon bullet feet., veg prep area, ss work table with 2 sink unit & 1 u/s.16swg ss sunken top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 2 nos sink of size 450 x 450 x 300mm deep, radius corners, fitted with 38mm waste coupling, 150mm splash guard on rear and (left/right) sides, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., mixer faucet, single hole, deck mount mixing faucet.single hole deck mount mixing faucet with polished chrome plated brass body, 10 1/8" swing nozzle with full flow laminar flow device, quarter-turn ceramic cartridges, lever handles, 18" flexible stainless steel supply hoses with 1/2" npsm / 5/8" o.d. compression connections. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., single hole single temperature deck mount faucet for ro watersingle hole single temperature deck mount faucet with polished chrome plated brass body, 5 7/8" swivel gooseneck, 2.2 gpm aerator, ceramic cartridge, lever handle and 1/2" npsm male inlet. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., chopping table with 1 u/s.full length and full width 40mm food grade nylon chopping board supported by ss angle frame, 150mm rear splash on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., ss work table with 2 u/s.16swg ss top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 150mm splash guard on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., commercial k

Central Government/Public Sector

CTN :39902843

28 Apr, 2025 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : supply of safety guard for air spring levelling valve item no.1 as per drg. no. icf/sk2-9-0-136 alt . c or latest. [ warranty period: 30 months after the date of delivery ]

CTN :39924638

24 Apr, 2025 10.00 Lacs

Mandsaur - Madhya Pradesh

Tender For inviting rates for sanitation materials for financial year 2025 26 at narayangarh town - : inviting rates for sanitation materials for financial year 2025-26 at narayangarh town, dustbin twin pit double capacity 60 liter, dustbin singal pit capacity 60 liter, dustbin singal pit capacity 05 liter, bathroom cleaner liquid harpic domex isi mark, gumboot uper size black colour isi mark, jacket reflective (nagar parishad name sahit), chuna powder (lining ke liye), plastic balti (10liter), acid cleaner for bathroom, floor cleaner best quality, hand gloves best quality, hand gloves ruber best quality, safai kamgar safety helmet best quality, exhaust fan 09 inch. for matel body best quality, track suit best quality with nagar parishad narayangarh mono, iron phawda hevi 4 12, 03kg me, iron phawda hevi 6 8, 3.5kg me, hand guard kachra gadi 18-20gej, 02 wheel, capacity 05 cubic fit high quality, phenoil goli isi mark, iron shovel complete with handle weight 3kg, sodium hypochlorite, multipupose cleaner, pine cleaner isi mark, fighter liquid isi mark, mask high quality, iron phawdi 04fit length, iron phawdi 06fit lenght, vermicompost pit 12*04 best quality, safai kamgar ppe suit kit, xxxl size

CTN :39906993

19 Apr, 2025 10.00 Lacs

Sarni - Madhya Pradesh

Tender For planting of required size plant/trees with their maintenance for one year with digging of hole of 0.6m dia. 0.90 deep in the ground including mixing of the soil with manure watering safety guard, including all maintenance and other work.

Central Government/Public Sector

CTN :39920497

14 Apr, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of miscellaneous fabricated items - bend pipe sub assly to drg no 37184905033 rev-03,var00. , silincer flap cover (spp loco) to drg no.27184905005 rev-05.v-oo. , pipe support channel to drg. no. 47184905009, rev-03, item- 1. , silencer clamp sub assy.to drg no. 27184905009,r-02,v-00. , pipe support channel as drg no. 37184905024, r-02. , silencer clamp as drg no. 37184905027,r-02. , fuel tank adopter to drg. no. 37185001000,rev 03. , bracket plumber block mtg(sn510). to drg no. 27183205106,v-00,r-02. , stool for ag to drg no. 27188714014, v-00, rev-03. , special bolt ( 5/8") for radiator to drg no. 47188801041,rev-00. , brake adjusting screw to drg no 37181901012,r-04,v-00. cadimium plated (cpp) or zinc plated (zpp). , distance piece (for brake pull rod) drg.no 37181901008r-07,it-01. , steel plate for pull rod to drg no. 37181901038.rev 00. , hanger cross tie sub assy. drg: 27181901006,rev-02,var-00. , brake adjuster block sub assly to 27181901014 rev 06 var 00. , chain assly (for dee shackle)to drg no 37193804000.v-00,r-02. , hook st. bar dia 6 mm to drg. no. 47181904002, item-01. rev-02. , pulley arrangement. each set consists : 1. pulley as per drg 27183205107 rev 03 - 1 nos 2. retaining plate as per drg 47183205000 rev 03-2 nos. , pulley mtg arrangement as per drg 27183205010 rev 00 it 1,3 and 9 (qty of eac h item shall be as mentioned in the drg against the sl no 1,3 and 9) , check plate, mtg bkt and bolt . each set consists of following: 1. radiator holding arrangement as per drg 37188705024 rev 03-2 nos 2.mtg pad for radiator holding as per drg 47188705016 rev 01-2 nos 3.shear chk pt for ag as per drg 47 188705025 rev 01- 2nos 4.shear chk plt for alt as per drg 47188705024 rev 01 - 8 nos 5. jacking pad as per drg 47183205009 rev 01 -16 nos 6. shear chk bolt as per drg 47183201101 rev 02-4 nos" , safety guard for compressor as per drg 17185605006 rev 00. , safety guard as per drg 27185605010, rev 02. , "air cleaner assy. each set consists of following: 1. angle sub assy for air cl eaner a s per drg 37188705028 rev 01-2 nos 2. bkt for air cleaner as per drg 37188705026 rev 01-4 nos 3. air cleaner support bkt aub assy as per drg 37184905083 rev 00 var 00 -1nos" , "locking plate and washer. each set consists of following: 1. locking plate a s per drg 47188805006 rev 00 it 01-4 nos 2. locking plate as per drg 47188805006 rev 00 it 03-3 n os 3. plate washer as per drg 37188805016 rev 01 it 03-8 nos 4. plate washer as per drg 371888050 16 rev 01 it 02-8 nos" , "engine mtg bkt. each set consists of following: 1. engine mtg bkt front end rh a s per drg 17183219014 rev 04 var 00 -1 no 2. engine mtg bkt front end lh as per drg 17183219013 rev 03 var00 - 1 no 3.engine mtg bkt rear end rh as per drg 17183219012 rev 03 var 00 - 1 no 4. engine mtg bkt rear end lh as per drg 17183219012rev 03 var 01 - 1 no , "blower mtg duct. each set consists of following: 1.blower mtg duct front end as per drg 17183205006 rev 03 var 01-1 no 2.blower mtg duct rear end asper drg 17183205010 rev 1 0 var 00-1 no" , mtg pad for alternator as per drg 2 7188705007 rev 01 var 00. , radiator support and mtg arrangement. each set consists of following: 1.ra diator duct support assy as per drg 27188705020 rev 03 var 00- 3 no 2.radiator mtg bkt assy as per drg 27188705012 rev 02 var 00-4 no. , "set of special bolt for brake rigging. each set consists of follo wing: 1. spe cial bolt as per drg 47181901046 rev 00 it 01-8 nos 2.special bolt as per drg 47181901046 rev 00 it 02-8 nos 3. special bolt as per drg 47181901004 rev 03 it 01-8 nos" , outer hanger sub assy rh as per drg 27181901019 rev 01. , outer hanger sub assy lh as per drg 27181901018 rev 01. , inner hanger sub assy lh as per drg 27181905012 rev 00. , inner hanger sub assy rh as per drg 27181901021 rev 02. , frame assy of air brake console-2 scope of supplybhel drg- 27184101003 rev 00, (item no-001 to 007) , jockey pulley arrangement as per drg no. 27188801040, rev-02. ( all har dware are in scope

CTN :39909965

24 Apr, 2025 NA

North 24 Paragana - West Bengal

Tender For tender for supply of spares - pin , bolt , nut , nut , yoke , seat , rod , shim 0.2mm , gasket , seal oil , bolt , spring , ring snap , key , circlip internal , plug , screw , bolt , gasket , plug , stud , spring , cover , bolt , bolt centre , safety valve assy , cover , elbow , tube , tube , tube , tube , tube , tube , tube , washer spring , bolt , plate , plug , cover lh , cover rh , washer , lock , ring snap , o ring , spring washer (lm) , bearing front idler , bushing front idler , yoke , shim 06mm , bracket , bolt , bushing , seat , washer spring (lm) , bolt , nut , bolt , nut , washer , drawbar pin lock ( latch assy) , nut , cover , bolt , bolt , eye bolt , pin , cover engine side rh , cover engine side lh , cover , cover radiator , bonnet , nut , washer , cover front , lock bottom plate) , pin cotter , bolt , washer , cover , name plate , name plate , bolt , spring , pin , plate , support , oil seal , o ring , circlip internal , screw , screw , return spring case a , make up valve , spring , spring , bolt , fitting grease , pin cotter , collar , rod , end rod , nut , plate , rod , lever , bolt reamer , lever , bolt , nut , tube cylinder , plate , bolt , bolt , tube rh , plug , plug , bracket , bracket , plate , tube , tube , bracket , tube , tube , bolt (lm) , pin , washer , pin cottor , bolt , pin , lock screw , pin , bushing (lm) , pin , pin , bracket , cap , arm , brace , screw , nut , joint , c frame assy , kit wire harness , clamp , clip , clamp , clamp , clip , clamp , clip , bracket , clip , lamp guard rear rh , lamp guard rear lh , guard smart alarm , lamp guard , front rh , lamp guard , front lh , seat , seat , elbow , connector , bolt , overhaul kit for pe6pas70 fip , o ring , rotor , bolt , screw , screw , washer spring , washer

Central Government And Public Sector

CTN :39896205

29 Apr, 2025 NA

Raipur - Chhattisgarh

Tender For supply of set of safety protective clothing for welders as per is 6153:1971 consisting of : 1. light weight leather apron (jointed), size :1210x615x(1.5 to 2)mm ,qty :1 2. light weight leather leg guard, size : 445x310x(1.2 to 1.5)mm ,qty :2 3. light weight leather arm guard, size : 490x210/145x(1.2 to 1 .5)mm ,qty :2 all leather clothing shall be stitched with 25/3 ply linen thread or cotton sewing thread conforming to variety no. 38 of is : 1720-1969.all ends of seams shall be secured by lock stitching or by riveting. the threads shall be inherently fire-resistant or be so treated that it shall not smoulder ba ck along the seam when ignited. the protective clothing shall be marked legibly and indelibly with the following: a) manufacturer%u2019s name; b) trade-mark, if any; c) size, and d) date of manufacture. the material shall be individually wrapped in polyethylene sheets or packed in covers. as per specn. i s: 6153:1971 [ warranty period: 30 months after the date of delivery ]

CTN :39889870

22 Apr, 2025 NA

Tarapur - Maharashtra

Tender For supply of various gases in departmental cylinders - industrial grade oxygen gas , commercial argon gas , dissolved acetylene gas , hydro-static stretch testing and pneumatic leakage testing , valve replacement , valve spindle replacement , valve safety guard replacement , neck ring replacement , cleaning , purging , painting

CTN :39889605

21 Apr, 2025 NA

Patiala - Punjab

Tender For supply of medical equipments in various locations in distt. patiala (as per detail attached) - supply, ot table, hydraulic operated with smooth gear mechanism, double cylinder loak proof, stainless steel, medical refrigerator 250-300 ltr. with shelf temperature setting (approx) +0 to +8 c, voltage 220 - 240 v, freguency 50/60 hz, ot light ceiling mounted single dome 12 led with led 50000 lux 22" dia dome with 4 reflector of 8 dia. auto spring balanced, heavy duty step down transformer. sterilizable central handle., ecg machines 12 leads single print 10-hour standby time, continuous print more than 3-hour, auto-analysis and auto-diagnosis for routine ecg parameters, built-in large capacity memory, casseta 14*x17* for pre-installed dr system for xray at mkh patiala make agfa, semi auto analyzer with built in software for the calculation and curve plotting. light source led, open system capable using all grand reagents and all the test programs should be in open mode. user interface: lcd display with touch key board, flow cell type permanent flow cell. memory >= 500 tests, in-built thermal printer, in-built thermal printer required, accessories to be supplied 1. micro pipettes (* no.) - 2 variable (5-50), (100-1000), small tips 500 nos. & large tips- 500 number, laproscopic surgical instrument set, ups 1kva offline for ultrasound machine simulated sine wave or better voltage avr mode 200-245v voltage battery mode 230vac +10%e frequency (htz) on battery 50/60hz + 0.1hz, 30 min backup, iso 14001/bis certification, biphasic defibrillator monitor 8.4" inch size screen, charging time of less than 9 seconds for maximum energy of 2 to 360 joule, synchronized & asynchronized cardio-version and having in-built thermal printer, monitoring 12 lead ecg, heart rate, spo2, & nibp, 230v, 50hz ac mains and battery capable of delivering up to 50 shocks at 200 joule, iso /en 60601-1, certified, oem warranty 3 year, boyles apparatus, 4 cyl mechanical with 3 gas system with hypoxic guard with 2 vaporizer (halothane & isoflurane), ice lined refrigerator (ilr) 144 lt 220 volt 50 hertz, in build stabilzer led (3-digit digital display), galvanized steel, stem alchol thermometer, ground clearance (min) 100 millimeter, holdover time (in a continuous external temperature of +43 degree celsius -24 hour, sets of instruments used for laparoscopy surgerya. gull bladder extractor, b. call stone spoon extractor c. 10 mm safety trocar, d. aspiration needlee. 5mm and 10 mm reducers, metallic continuous spray pump 1.5 ltr. (ganesh pump) type: hand compressor sprayer, tank: brass. tank capacity: 1.5 lit. pump barrel brass, working pressure, 40 - 45 psi, baby warmer steel tubular structure pretreated and powder coated heater rotation +90, bed tilt should be 615 , led displays, aulomatically cut off at 38 degree celsius, probe accuracy specilication: +0.1 c @ 30 c to 42 c, 200 to 240vac 50 hz supply

Central Government/Public Sector

CTN :39883766

16 Apr, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of set of safety protective clothing for welders as per is 6153:1971 consisting of :- (1) light weight leather apron (jointed), size :1210x615x(1.5 to 2)mm ,qty-1 no. (2) light weight leather leg guard, size : 445x310x(1.2 to 1.5)mm, qty -2 nos. (3) light weight leather arm guard, size : 490x210/145x(1.2 to 1.5)mm ,qty-2nos.note:- all leather clothing shall be stitched with 25/3 ply linen thread or cotton sewing thread conforming to variety no. 38 of is : 1720-1969. all ends of seams shall be secured by lock stitching or by riveting. the threads shall be inherently fire-resistant or be so treated that it shall not smolder back along the seam when ignited. the protective clothing shall be marked legibly and indelibly with the following: a) manufacturer%u2019s name; b) trade-mark, if any; c) size, and d) date of manufacture. the material shall be individually wrapped in polyethylene sheets or packed in covers. as per spec no. is:6153:1971 or latest.

Body Armour Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector