Latest bogie bolster Tenders | Government bogie bolster Tenders

Central Government/Public Sector

CTN :41296378

27 Aug, 2025 NA

Mumbai - Maharashtra

Tender For supply of bogie bolster (coil spring) for lhb coaches as per rcf drg. no. 1267420 ver. 04r & mdt s 204001 rev 01 or latest. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41295608

08 Aug, 2025 NA

Avadi - Tamil Nadu

Tender For supply of helical spring for modified bogie bolster outer as per icf drg no.emu/m/0-5 -050 item 1 alt k/2 for motor coaches. [ warranty period: 30 months after the date of delivery ]

Corporations And Associations And Others

CTN :41289329

13 Aug, 2025 88.02 Lacs

Delhi - Delhi

Tender For supply and installation of children play equipments under mplads funds of parliamentary constituency new delhi, south delhi and chandni chowk for various locations of parks in municipal corporationof delhi - supply & installation of children play equipments under mplads funds of parliamentary constituency new delhi, south delhi & chandni chowk for various locations of parks in municipal corporationof delhi, supply and fixing of four seated merry go round. area: 1.5 m. height 0.8 m. seat moulded f.r.p. main frame: 40 nb g.i. pipe. bearing : heavy duty bearing. ms plate: 250x10mm. support pipe- 80nb. the topcoat is duly powder coated. the item shall be having its main frame made up of 25 & 40. mm nb b class g.i. pipe. the stand shall be made in 80 mm nb b class g.i. pipe. the whole structure shall be mounted on heavy duty bearing shaft. the bearing used shall be of heavy duty bearing permanently lubricated with water sealant. the seat frame shall be made out of frp (fibre reinforced plastic)/lldpe (low linear density ploy ethylene). the seats shall have handrails so that the child does not fall. it shall accommodate 4 children at a time. the powder coating shall be done on the pipes to avoid rusting. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of arch swing. leg support : 80 mm nb pipe, seat- anti skid rubber belt. bearing : heavy duty ball bearing. area : 3.0 m x 2.5 m. height : 2.5 m. top bar : 60 mm nb pipe. suspension : 6 mm rubber coated chain. the topcoat is duly powder coated. in this one child can enjoy the swing at one time. the arch shaped side frame shall be made of 80mm nb b class gi pipe shall be made up of 50mm nb b class gi pipe. the frame shall be powder coated to give an aesthetic look. the swing shall be made up of 10mm thick anti skid rubber top the rubber belt seat / u shape swing seat with 2 eye bolt tyb-s06. made of polyurethane of size 53 x 20.5 x 20 shall be suspended on 6mm rubber coated gi chairn. the bail bearings shall be mounted inside a specially designed nylon clamp. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of toddler swing.the area :- 2.8m x 1.0m . in this toddler swing the center support shall be made up of 80 mm nb b class g.i. pipe. the horizontal bars shall be made up of 50 mm nb b class g.i. pipe. all gi pipes shall be powder coated. between the two horizontal bars there shall be a heavy-duty metal clamp attached to it. the bucket seats of the toddler swing shall be made of rubber with anti skid. the ball bearings shall be mounted inside specially designed nylon balls. the rubber seat shall be affixed on 8 mm thick gi chain. the seats shall be made with full care so that the child does not fall from it while swinging. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of std. see sawhandle :-20 mm n b pipe. lever-32 mm n b pipe. colmun : 60 mm n b pipe. bearing : nylon bush press fitted. seats: frp seats with steel frame. the topcoat is duly powder coated. the level of see saw shall be made from 15, 20 and 25mm nb b class gi pipe. the seat of see saw shall be made from frp/lldpe. the stand and bush bearing made in 40mm nb b class gi pipe. see saw lever shall be welded to 5mm thickness ms plate for nut bolting with stand. all pipes flat

CTN :41186105

04 Aug, 2025 NA

Parganas - West Bengal

Tender For bid to ras tender for supply of nut , plug , retainer , bolt , flat-head screw , spring , valve , exhaust , screw plug , ojde spanner 12x14 mm , spring , elbow , o ring , o ring , seal bearing , ojde spanner 19x22 mm , o ring , o-ring , liner , lower , gasket(fig-1510 by 05) , bolt , key , ring seal , clamp , pin dowel , lock , element filter , gasket , bearing needle , spanner , valve , adaptor , gasket , cable techo hour meter(fig-1045a) , element filter (ctlg fig-61) , strainer , ojde spanner 13x17 mm , spanner 10x11 mm (ojde open end) , spill tube , nut , seat , intake valve , insert , tihckness gauge allen key , 13 mm socket(sl no-g15313) , seat , exhaust valve , insert , seal , rod , spnr ojde 32x36mm , sensor oil pressure switch (fig-2010) , gasket , flange , clamp , clamp , plug , seat , set screw adjusting , hose , wrench hook(sl no-g15313) , gasket(fig no-3105) , fuse box cover , mc piping service kit , regulator & bush box assy , 22 mm socket(sl no-g15313) , o-ring , plate (fig-30) , lock , o ring (ms sl-120) , gauge , level , bolt , 27 mm socket(sl no-g15313) , seal , t handle 290mm , cap , pad rubber( fig no-5005 , sl no-13) , o-ring , seal , rectangular ring , o-ring , seal oil , lever , shaft , pto , bushing , aux diode(ctlg fig-10b) , metal ball(fig-4010 by 11) , lining brake , bushing , retainer , switch bty relay , cover , cyl .head (bd80 eng fig. no. 1150) , cover , body , adapter , tube , tube , wire harness , fuel pump , race inner 8b-5 by 150 , piston ring assy (containing 03 items) , race inner , scraper rh , hose(n743) , regulator (make lucas tvs)(ms) , gasket cyl head , lever , rod , cover , tube , injection no 1 , tube , injection no 2 , tube , injection no 3 , tube , injection no 4 , bearing ball , tube , element assy(fig-1410) , bit end rh (ctlg fig-7006) , tube , race inner , muffler , wire harness , front , shaft (os sl no-80) , plate main clutch (covered 04 plants) , puller 30 ton (ctlg sl-07) , hose , loose spring assy(fig 1015 , sl no-69) , operator seat assy , bracket , speedo meter (fig-12) , pulley , seat operators(ctlg fig-40) , bushing , gear driven 1st(fig-2125) , shaft intermediate , drive tachometer , bushing , gear driven reverse , seal ring assy , bracket lh , shaft , bushing , core assy , bonnet , arm , rocker assy , shifter clutch dog(price list sl-836) , bracket , bearing roller , oil pump assy , pressure spindle , oil cooler assy , fly wheel and rmg gear , starter motor assy self starter , power take off assy , flywheel assy(fig-2210) , frame lh (p-255)

CTN :41163543

04 Aug, 2025 NA

Parganas - West Bengal

Tender For bid to ras tender for supply of purchase of spares c c = - stop (plate no- b2-1-4 , sl no-29) , spring extension (plate xxv a) , buffer , mounting rear road light l oblique s(plate viii h) , knob excavator c oblique w switch as supplied(d1-8-35) , rubber hose(plate-l1-4-10) , door stay , plate door catch , sealing ring ce(ms-190) , relay f by r (ms sl-140) , brush spring(ms-191) , lock cover door lh (plate iv n) , pad wear 6mm upper colour red , lower door glass(ms sl-46) , pad wear 7mm upper colour blue , link 1.25 ton (plate xxxi y) , cab base mounting , pipe assy( plate no-a1-7-2 , sl no- 23) , buzzer(plate-c3-2-3) , hinge door (item no-305) , glass front quarter light left hand clear , glass right side quarter light(sl-378) , gaiter hand brake , glass front quarter light right hand clear(plate-b , glass left side quarter light , tube , ferrule for push rods , catch side window lockback (jcb 3dx super page-89) , bty cover (ms-67 , jcb u oblique v) , gaiter gear lever , leaver tipping (plate-vi t-1) , jug oil 200cc , glass six light l h side , side window glass(ms sl-55) , glass six light right side , glass six light rear , door seal left hand (item no-323) , door tinted glass lower , door tinted glass lower(sl no-322) , glass six light right rear side , latch assy inner rh(item no-341) , brush carrier assy(ms-192) , internal puller , glass tinted right (plate-iv r) , door tinned glass upper(item no-321) , door tinned glass upper(item no- 338) , brake shoe(ms-187) , l h cab door upper window glazing(sl-298) , grab sleeve , window tinted glass left hand side(super plate pla , step (plate - iii c) , rear window tinted glass (jcb super page-107) , wind screen(plate-b2-3-5) , window frame left hand slide (item no-354) , pipe exhaust exhaustion(3dx p3-4-2 sl no 14) , tool kit standard(jcb super) item32 nos qty34 nos , unloader valve with inflator (ispl-97) , grab sleev , swivel hook , door painted & sealed left hand(item no-320) , grab sleeve , grab sleeve , silencer exhaust box 240x150mm(p-627) , tool pyramide (plate- xxxi aa-21) , thrurst ring , silencer exhaust turbo(ms sl no 148 , apr-2015) , blank radio aperture (plate ix a) , t handle 1 inch sq drive(be220g fig no-8000) , windscreen front (jcb 3dx super) , liner roof assy (plate iv f) , frame outer rear window(jcb super p-105) , back up tool , roof moulding(plate-iv e-1) , tools kit (set of 41items) , assembly jig , fender rear lh (plate iii j) , kit piston ring o s 05 mm (plate xxxii f) , o ring (plate xxxii l) , seal rear oil (plate xxxii n) , gasket cyl head(plate xxxiii a) , seal bonded (plate xxxiii a) , valve inlet (plate xxxii b) , valve exhaust (plate xxxiii c)

CTN :41296061

17 Sep, 2025 NA

Halisahar - West Bengal

Tender For supply of hanger for bogie bolster spring suspension to icf's drg.no. t-0-5-639 , alt.n o.-g/11 and rdso's str no. c-k 105 rev-1 of july'2014 with amendment slip. no 1 of december 2016 [ warranty period: 30 months after the date of delivery ]

CTN :41275838

09 Aug, 2025 NA

Parganas - West Bengal

Tender For tender for supply of pin cotter split phi 6.3 mm , 40mm long , bolt bracing bridge - tube m12 x 33mm (impd-4173) , bolt bracing bridge frame m12x133 mm , spike common ground , drift pin- deck bridge set , fixed class 3 , la , end post bridge , clip panel pin bridge anchorage (hfb) , carrying bar bridging parts , bridge set fixed cl 3 , 1 a , kerb bridge , bracing member bridging tube small , bracing member bridging tube large , roller , launching rocking bridge plain , base plate bridge- plate bearing , pedestal roller bridge small , frame bracing pannel bridge nose , lever panel bridge with base , pedestal roller bridge large , bearing bridge plate (imsa-0757) , frame bracing pannel bridge , deck unit bridge , ramp , bailey bridge- bridge set fixed , rope cotton side 16mm dia x31500mm long , roller launching rocking bridge assy(imsa-0762) , pannel , bridge mains , pannel bridge end

CTN :39038241

22 Aug, 2025 10.88 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, machine tools & equipment foran international standard itotin mechanic diesel engine (md) tradeat iti bardoli, gujarat, india (package 3: mechanic diesel - files assorted sizes and types including safe edge file(20no’s), flat file, second cut, flat file, bastard, grease gun, grease gun heavy duty trolley type, growler, hacksaw frame, hammer ball peen, hammer chipping, hammer copper with handle, hammer mallet, hammer plastic, hand operated crimping tool, hand vice, hollow punch set of seven pieces, insulated screwdriver, insulated screwdriver, left cut snips, magnifying glass, oilcan, philips screwdriver set of 5pieces, pipe cutting tool, pipe flaring tool, pliers combination, pliers flat nose, pliers round nose, pliers side cutting, engine wire harness connected complete with electrical equipment, diesel fuel quality test equipment set, training setup for adas systems, 4-wheel alignment set & hoist with advanced driver assistance systems (adas), training system for sensors in motor vehicles, training system for the basics of pulse generation and ignition in vehicles, training system: common rail diesel injection system, battery–charger, car jet washer with standard accessories, chain pulley block capacity with tripod stand, compression testing gauge suitable for diesel engine with standard accessories, connecting rod alignment fixture, cylinder liner-dry& wet liner, press fit & slide fit liner, different type of engine bearing model, different type of piston model, fuel feed pump for diesel, fuel injection pump (diesel)inline, fuel injection pump dismantling toolkit /universal vice, fuel injection pump ve pump/ distributor fuel rotary pump (dpc) pumps, glow plug tester, injector–multi hole type, pintle type, injector cleaning unit, injector testing set (hand tester), oil pump for dismantling and assembling., piston ring compressor, piston ring expander and remover., piston ring groove cleaner., radiator cut section-crossflow, radiator cut section-downflow, radiator pressure cap, tandem master cylinder with booster, turbo charger cut sectional view, water pump ford is mantling and assembling, workbench with bench vice and storing drawers, arbor press hand operated 2-ton capacity, drilling machine bench to drill, dual magnetization yoke, grinding machine pedestal (general purpose), hydraulic jack, pipe bending machine (hydraulic type), pneumatic rivet gun with standard accessories, tin smiths bench folder, trolley type portable air compressor, special tools and equipment, hydraulic vertical honing machine for engine cylinder and brake bore, pneumatic valve seat grinder and lapping kit, intercooler cut model assembly with air filter & housing assembly diesel engine, work benches with bench vices and storage draws to demonstrate machines, belt tensioner gauge, granite surface plate with stand and cover, marking out table, multi scan tool, spring tension tester, ammeter dc with external shunt, cylinder bore gauge, dc ohmmeter, depth micrometer, dial gauge, multimeter digital, oscilloscope, outside micrometer, outside micrometer, outside micrometer, outside micrometer, sheet metal gauge, straight edge gauge (2ft.), straight edge gauge (4ft.), surface gauge with dial test indicator plunger type, tachometer (counting type), telescope gauge, temperature gauge with sensor, thermostat, timing lighter, tyre pressure gauge with holding nipple, vacuum gauge, vernier calliper, wire gauge(metric), hydrometer, engineers stethoscope, drill twist (various sizes), hand reamers adjustable, drill twist(assorted), set of stock and dies with die stock-metric, taps and dies complete sets(5types), steel rule, caliper inside with spring, caliper outside with spring, dividers with spring, engineer’s square, feeler gauge 20blades (metric), hand shear universal, bench lever shears, air blow gun with standard accessories, air ratchet with standard accessories, air impact wrench with standard accessories, an

Central Government / Public Sector

CTN :41280497

18 Aug, 2025 NA

Vijayawada - Andhra Pradesh

Tender For supply of bracket for anchor link (bolted design), each set consists of two items 1) bracket for bogie fra me drg.no. t-0-3-680. 2) bracket for bogie bolster drg. no. t-0-4-657. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :41295987

29 Aug, 2025 NA

Secunderabad - Telangana

Tender For supply of packing piece 5 x 65 x 170 (for bogie bolster suspension arrgt.) conforming to is specification is:2062-99 fe 410cuw c and to icf drawing no. dmu/tc4-0-5-406, item-2, alt.- nil. [ warranty period: 30 months after the date of delivery ]

Bogie Bolster Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Corporations And Associations And Others

Central Government / Public Sector

Central Government / Public Sector