Tender For manufacturing and supply of 52kg special machine check rails 11.5m long according to rdso drg. no. t-4215 alt. nil as per irs specification t-10-2025, for use with pre-stressed concrete sleeper for level crossing to drg. no. t-4148 for 60kg rail complete with all slots, holes, bending and flare etc. (the alteration in drawing and specification issued by rdso up to one month prior to tender opening date shall be applicable). note: one set consists of two check rails of 11.5m of 52kg rail. [ warranty period: 30 months after the date of delivery ] ]
Tender For corrigendum : running contract for manufacture and supply of 10125 mm thick web curved switches with check rails for 25t axle load with complete fittings as per rdso drg. no. t-9791 (alt-02) and spring setting device as per drg. no. t-6216 with latest alteration, including metal liner, pocket type ncr-grsp (10mm thick) but excluding standard fish plates, standard fish bolts & nuts, elastic rail clips, hvn insulating liners. pre-curving of tongue rail & stock rails for turnouts of similar & contrary flexure shall be done whenever required, without additional payment, in accordance with rdso's guidelines of pre-curving issued vide letter no. ct/ptx/tws design dated 27.07.2018. the stock rail shall be in 60e1 rail profile of r-260 grade and tongue rail shall be in 60e1a1 rail profile of r-260 grade as per irs specification no. t-12 and irs specification no. t 10 2025 and irs no. irs no. t 62 2025. " as per note sl no. 27 of rdso drg. no. t-9791, alt-02, "10% quantity (i.e. 1/10th of the quantity of purchase order of 1 in 12 60e1a1-tws) of breakage prone and wear prone spare parts (shown in part-c of rdso/t-9791, alt-02, annexure-b. ) shall be supplied with every purchase order of 1 in 12 60e1a1-tws for replacement of these spare parts as per need during service life of the 1 in 12 60e1a1-tws ".note:- (i) the rate includes cost of stock rails, tongue rails and check rails. note:- (ii) ncr grsp shall be procured from rdso approved vendors only as per irs specification no. t- 55-2025 (revision-1) and with process inspection by rites (non-tpi) note:- (iii) spring setting device shall be procured from rdso approved vendors only as per irs specification no. t- 54 (revised - 2024) note:- (iv) list of fittings is enclosed as annexure-a . note:- (v) list of breakage prone and wear prone spare parts is enclosed as annexure-b. note:- (vi)the lh & rh quantity bifurcation is as under- lh = 400 sets & rh = 400 sets. [ warranty period: 30 months after the date of delivery ] ]
Tender For corrigendum : tn-mm-2170 supply of railway track material for private siding and marshalling yard of sstps suratgarh - cms crossing 1:8.5, 52kg to rdso drg. no. t-4867, cms crossing 52 kg 1 in 12 rdso drawing no. t-4734, slide chair plate 52 kg of 1: 8.5 (01 set= 20 nos. plate) railway drawing no. :- t-4968, combination fish plate 60 kg and 52 kg to rdso drg. no. t-696-699 (1 set = 2 pair (4 fish plate, 8 nut,8bolt), glued joint 60kg to rdso drg no. t-5843, glued insulated rail joint g-3(l) for 52 kg rail rdso no- t- 671, check rail set at 4.33 mtr. for 1 in 8.5 of crossing bg for 52 kg rdso drawing no. rt-4773, gauge tie plate 52 kg of 1:8.5 railway drawing no.:- t-5812, t-5812/1, t-5812/2, ms plate c/switch 52 kg of 1:8.5 for lever box railway drawing no.t-3901, bearing plate of c/switch 52 kg 1:8.5 (01 set= 06 nos.) railway drawing no. t-4869 to t-4874, fish plate for 52 kg rail 610 mm long rdso n0- t-(090)(one setcomprise of 2 nos. fish plate & 4 nos. fish bolt & nut), galvaized nut & lock nut id-no. 3/16 and bolt with flat&spring washer size(16x50x38 )mm as per rdso no eti/c/0073, gfn liner 60 kg to rdso drg. no. t-3706, 60s approach sleeper of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4786, 60s-1as approach sleeper of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4787, 60 -2as approach sleeper of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4788, 60-3a approach sleeper of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4789, 60-4a approch sleeper of point& crossing 1 in 8.5 52 /60 kg as per rdso n0.4790, sleeper n0.1 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4791, sleeper n0.2 of point& crossing 1 in 8.5 52 /60 kg as per rdso n0.4791, sleeper n0.3 of point& crossing 1 in 8.5 52 /60 kg as per rdso n0.4793, sleeper n0.4 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4794, sleeper n0.5 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4795, sleeper n0.6 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4796, sleeper n0.7 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4797, sleeper n0.8 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4798, sleeper n0.9 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4799, sleeper n0.1 0 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4800, sleeper n0. 1 1 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4801, sleeper n0.1 2 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4802, sleeper n0.1 3 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4803, sleeper n0.1 4 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4804, sleeper n0.1 5 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4805, sleeper n0.1 6 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4806, sleeper n0.1 7 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4807, sleeper n0.1 8 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4808, sleeper n0.1 9 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4809, sleeper n0.20 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4810, sleeper n0. 21 of point & crossing 1 in 8.5 52 /60 kg as per rdso n0.4811, sleeper n0.22 of point& crossing 1 in 8.5 52 /60 kg as per rdso n0.4812, stretcher bar of c/switch 52 kg of 1:8.5 (01 set= 06 nos.) railway drawing no.- t-4885- 86, t-4887-88, t-4889-90, rail dolly bg attachment for transportation of prc sleeper with insulated wheel, grsp for 1:8.5 t/out, 52 kg to rdso drg. no. t-4865, gfn liner rt-3707, gfn liner rt-3708, improved sej 60 kg with complete fitting (rt-4902) and with psc sleepers (rt-4149) for max. gap =80 mm(in single gap)(fittings- plate screw,washer,nut bolt,m.s. bracket,c.i. chair,check rails,tongue rails,stock rails,gap avoid rails,split pin etc. as per rdso numbers), 1 in 12 curved switch (lh turnout/rh turnout, 01 rh and 01 lh tounge rail length 12356 mm and stock rail 01 lh & 01 rh 13000 mm l
Tender For corrigendum : supply of railway track material for private siding and marshalling yard of sstps suratgarh - cms crossing 1:8.5, 52kg to rdso drg. no. t-4867, cms crossing 52 kg 1 in 12 rdso drawing no. t-4734, slide chair plate 52 kg of 1: 8.5 (01 set= 20 nos., plate) railway drawing no. :- t-4968, combination fish plate 60 kg and 52 kg to rdso drg., no. t-696-699 (1 set = 2 pair (4 fish plate, 8, nut,8bolt), glued joint 60kg to rdso drg no. t-5843, glued insulated rail joint g-3(l) for 52 kg rail rdso, no- t- 671, check rail set at 4.33 mtr. for 1 in 8.5 of crossing bg, for 52 kg rdso drawing no. rt-4773, gauge tie plate 52 kg of 1:8.5 railway drawing no.:-, t-5812, t-5812/1, t-5812/2, ms plate c/switch 52 kg of 1:8.5 for lever box, railway drawing no.t-3901, bearing plate of c/switch 52 kg 1:8.5 (01 set= 06, nos.) railway drawing no. t-4869 to t-4874, fish plate for 52 kg rail 610 mm long rdso n0- t-, 090)(one setcomprise of 2 nos. fish plate & 4, nos. fish bolt & nut), galvaized nut & lock nut id-no. 3/16 and bolt, with flat&spring washer size(16x50x38 )mm as, per rdso no eti/c/0073, gfn liner 60 kg to rdso drg. no. t-3706, 60s approach sleeper of point & crossing 1 in 8.5 52, 60 kg as per rdso n0.4786, 60s-1as approach sleeper of point & crossing 1 in 8.5, 52 /60 kg as per rdso n0.4787, 60 -2as approach sleeper of point & crossing 1 in 8.5, 52 /60 kg as per rdso n0.4788, 60-3a approach sleeper of point & crossing 1 in 8.5 52, 60 kg as per rdso n0.4789, 60-4a approch sleeper of point& crossing 1 in 8.5 52, 60 kg as per rdso n0.4790, sleeper n0.1 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4791, sleeper n0.2 of point& crossing 1 in 8.5 52 /60 kg as, per rdso n0.4791, sleeper n0.3 of point& crossing 1 in 8.5 52 /60 kg as, per rdso n0.4793, sleeper n0.4 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4794, sleeper n0.5 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4795, sleeper n0.6 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4796, sleeper n0.7 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4797, sleeper n0.8 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4798, sleeper n0.9 of point & crossing 1 in 8.5 52 /60 kg as, per rdso n0.4799, sleeper n0.1 0 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4800, sleeper n0. 1 1 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4801, sleeper n0.1 2 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4802, sleeper n0.1 3 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4803, sleeper n0.1 4 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4804, sleeper n0.1 5 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4805, sleeper n0.1 6 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4806, sleeper n0.1 7 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4807, sleeper n0.1 8 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4808, sleeper n0.1 9 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4809, sleeper n0.20 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4810, sleeper n0. 21 of point & crossing 1 in 8.5 52 /60 kg, as per rdso n0.4811, sleeper n0.22 of point& crossing 1 in 8.5 52 /60 kg as, per rdso n0.4812, stretcher bar of c/switch 52 kg of 1:8.5 (01 set= 06, nos.) railway drawing no.- t-4885- 86, t-4887-88, t-, 4889-90, rail dolly bg attachment for transportation of, prc sleeper with insulated wheel, grsp for 1:8.5 t/out, 52 kg to rdso drg. no. t-4865, gfn liner rt-3707, gfn liner rt-3708, improved sej 60 kg with complete fitting (rt-, 4902) and with psc sleepers (rt-4149) for max., gap =80 mm(in single gap), (fittings- plate screw,washer,nut bolt,m.s., bracket,c.i. chair,check rails,tongue, rails,stock rails,gap avoid rails,split pin etc., as per rdso numbers), 1 in 12 curved switch (lh turnout/rh turnout, 01, rh and 01 lh tounge rail length 12356 mm and s
Tender For corrigendum : supply of 1-12 canted turnout r555 60kg gr-1080 rh (including switch, lead & crossing assembly, check rail and rails for welded leg) as per specification no. edfc-1 annexure-b and master drawing no. edfcc4743-04 including all fitting &fastening, backdrive but excluding psc sleeper, signaling equipment. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For installation testing commissioning of ballastless track of standard gauge including supply of 1080 hh rails fastening system turnouts scissor cross over check rails mss others for jaipur metro rail project phase 1c at jaipur rajasthan india
Tender For installation testing commissioning of ballastless track of standard gauge including supply of 1080 hh rails fastening system turnouts scissor cross over check rails mss others for jaipur metro rail project phase 1c at jaipur rajasthan india
Tender For manufacturing and supply of 52kg special machine check rails 9.5m long according to rdso drg. no. t-4215 alt. nil as per irs specification t-10-2025, for use with pre-stressed concrete sleeper for level crossing to drg. no. t-4148 for 60kg rail complete with all slots, holes, bending and flare etc. (the alteration in drawing and specification issued by rdso up to one month prior to tender opening date shall be applicable). note: one set consists of two check rails of 9.5m of 52kg rail. [ warranty period: 30 months after the date of delivery ] ]
Tender For auction sale of depot ferrous scrap - ap-apd-0113-rl-26-c298030012]scrap cond. released unserviceable rails such as check rails, rails 80 bh, joint/welded rails, rails-60 r, 52 kg, check rails 60 r, rails 75 r, sej stock rails, tongue/switches/ wing rails, different gages/length and cut pieces of rails and all types of mixed rails bg, mg, ng with/without attachment of acb plates, clamps, bolt & nuts fish plates, signal boards on as is where is condition available under the custody of cdms 08ward apnote: 1.pick and choose of the material are not allowed. loading to be started from one end and to be ended on other end only. (loc:bin no 113 at scrap yard)
Tender For auction sale of pway scrap - 1] st sleeper points & crossing - 14 nos, 2] st sleeper - 112 nos, 3] slide chair 52 kg - 101 nos, 4] stretcher bar 52 kg bracket - 299 nos, 5] stretcher bar 52 kg lug - 80 nos, 6] stretcher bar of sizes -188 nos, 7] check flat - 30.72 metres, 8] bridge tie angle - 54.43 metre, 9] sej bracket - 90 nos, 10] bearing plate of sizes - 128 nos, 11] gauge tie plate - 16 nos, 12] ms tie bar - 132 nos, 13] tie bar peg - 123 nos, 14] metal liner t.3741 - 2304 nos, 15] metal liner t.3742 - 2040 nos, 16] ms canted bearing plate - 11 nos and ms scrap - 6.655 mt. - total qty - 25.412 mt as is where is basis, [condemned, unserviceable, released, class - iii], custodian : sr. section engineer/p.way/nagercoil[ncj]., s.1539 no. 593658 dtd.21.12.2025, location : aralvaymoli [aay] yard (km 303/900 - 304/000 lhs) near railway qtrs.., note : 1] delivery to be made on actual weighment basis. 2] when crane loading is not possible, the purchase [by engaging his own labourers] is permitted to cut rails to loadable sizes of not less than 150 kgs., 3] in all cases, i.e. crane loading/ manual loading, when the length of rails exceeds 5 metres length, the purchaser [by engaging his own labourers] is permitted to cut rails to convenient lengths not less than 2.5 meters., 4] purchaser [by engaging his own labourers] is permitted to cut rails and hand over the non - ferrous and excess quantity to the custodian., special conditions : 1) jurisdiction- the courts in chennai alone shall have exclusive jurisdiction in the matters/disputes arising out of the contract/ arbitration/ conciliation proceedings and the place of arbitration/ conciliation, if any, shall be in chennai only., 2) forfeiture of bsv payment along with emd.-in southern railway bsv partly paid along with emd will be forfeited, if full payment is not received in stipulated time, with interest if any applicable., 3) part delivery-part delivery is not permitted against part payment on southern railway., nfs/side assets : 1] nfs as per tms jsos & ds 8., [pl no. 98057054, hsn code : 720429, gst : 18 % on fcm], item : ms items on actual weighment. [image attached].