Latest bogie frame Tenders | Government bogie frame Tenders

Central Government/Public Sector

CTN :44842214

14 May, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply of bogie frame to drg. no. (a) icf/mrvc/d-0-3-001, alt "n", col-ii (or) (b) icf/mrvc/d/bt-0-3-001, alt "c", col -ii along with damper fixing bracket to drg. no. (339)ac/dcemu/d6-0-1-602,col.i - 4 nos andbolt complete to drg. no. emu/m/3ph-0-2-002, alt "c", col.i - 16 sets bogie frame to be supplied without nylon bushes where ever applicable and shall confirm to rdso/specn.c-9202, rev-2 or latest. the firm shall fulfil the requiremnt as per icf/md/specn/147, issue status 01, rev-02 with amendment no- 02. special condition : - suppliers commitment will be there to supply as per drawing -(a) ( for dash pot arrangement ) or as per new drawing - (b) ( for adoption of conical spring ). - one month notice willbe given to vendor whether he has to supply as per drawing - (a) or drawing - (b). -rate quoted will be applicable to both drawing - (a) and drawing - (b) . i) paint scheme shall be as per drawing. ii) qap to format icf/ims/md/f-31 shall be prepared along with relevant documents and kept ready for developmental/educational order. iii)firm should supply bogie frame along with the dimensional report, stress relieving report and radiography films. iv) firm should have induction/electric furnace for stress relieving of bogie frame. v) prototype inspection is applicable only for first time of developmental/educational order. vi) stage inspection to be done as below. (a) raw material stage 1. ensure the raw material used using portable spectrometer machining stage 1. dimensional checks 2. edge preparations (b)welding stage 1. weld parameter to be checked and recorded. (c) surface preparation and painting stage. 1. short/sand blast to the requirements. 2. painting process as per the specification. 3. final product inspection. [ warrantyperiod: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45078636

14 May, 2026 NA

Chennai - Tamil Nadu

Tender For bogie frame to drg. no. (a) icf/mrvc/d-0-3-001, alt "n", col-ii (or) (b) icf/mrvc/d/bt-0-3-001, alt "c", col -ii along with damper fixing bracket to drg. no. (339)ac/dcemu/d6-0-1-602,col.i - 4 nos andbolt complete to drg. no. emu/m/3ph-0-2-002, alt "c", col.i - 16 sets bogie frame to be supplied without nylon bushes where ever applicable and shall confirm to rdso/specn.c-9202, rev-2 or latest. the firm shall fulfil the requiremnt as per icf/md/specn/147, issue status 01, rev-02 with amendment no- 02. special condition : - suppliers commitment will be there to supply as per drawing -(a) ( for dash pot arrangement ) or as per new drawing - (b) ( for adoption of conical spring ). - one month notice willbe given to vendor whether he has to supply as per drawing - (a) or drawing - (b). -rate quoted will be applicable to both drawing - (a) and drawing - (b) . i) paint scheme shall be as per drawing. ii) qap to format icf/ims/md/f-31 shall be prepared along with relevant documents and kept ready for developmental/educational order. iii)firm should supply bogie frame along with the dimensional report, stress relieving report and radiography films. iv) firm should have induction/electric furnace for stress relieving of bogie frame. v) prototype inspection is applicable only for first time of developmental/educational order. vi) stage inspection to be done as below. (a) raw material stage 1. ensure the raw material used using portable spectrometer machining stage 1. dimensional checks 2. edge preparations (b)welding stage 1. weld parameter to be checked and recorded. (c) surface preparation and painting stage. 1. short/sand blast to the requirements. 2. painting process as per the specification. 3. final product inspection. [ warrantyperiod: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :45076471

26 May, 2026 NA

Raipur - Chhattisgarh

Tender For overhauling of fabricated co-co bogie frames of wag-7 locomotives of diesel loco shed raipur.

CTN :45072246

25 May, 2026 55.70 Lacs

Pune - Maharashtra

Tender For supply of antibiotic impregnated vp shunt , programmable vp shunt , oxidised regenerated cellulose size 2 x 3 box of 10 , oxidised regenerated cellulose size 4 x 8 box of 10 , surgicel fibrillar size 2 inch x 4 inch, box of 10 , absorbable porcine gelatin sponge, box of 10 , shunt drape adult , lumber spinal pack , philadelphia collar assorted size , taylors brace , soft cervical collar assorted size , lumbo-sacral belt assorted size , craniofix titanium clamp 16 mm , craniofix titanium clamp 20mm , titanium mini plate 4 hole , self drilling mini screw for cranioplasty 1.5 x 5 mm , self drilling mini screw for cranioplasty 1.5by 7mm , cervical disc prosthesis , prebent occipital cervical rod titanium , cross link connectorcervical with clip , occipital cervical plate large , c1 c2 plate18x4 mm set of two , screws for c1 c2 plate 3.5 x 18mm , percutaneus cannulated pedicle mas screw 5.5 by 40 mm , percutaneus cannulated pedicle mas screw 5.5 x 45mm , percutaneus cannulated pedicle mas screw 5.5 by 50mm , percutaneus cannulated pedicle mas screw 6.5 by 45 mm , straight rod 5.5 mm length 120 mm for percutaneus screw , pedical screw contoured titanium rods 5.5 x 500 mm , expandable transverse cross connector with screws , tubing set disposable for ultrasonic aspirator , stylet 2 coil single package , pointer navigation axiem , burr tool f2 bta23 legend 8cm 2.3 mm taper , tool mr8-7ta11mr87cm taper 1.1 mm , tool mr8-14ba20d mr8 14cm ball dmd 2mm , tool mr8-sp 14ba30 mr8 14 cm sp ball 3 mm , cervical titanium expandable carpectomy cage 28- 36 mm , cervical titanium expandable corpectomy cage 20 mm , medicated iodine impregnated incise drape set , cervical peek cage 8 by 11 by 14mm , cervical peek cage 6 by 11 by 14mm , cervical peek cage 7 by 11 by14 mm , cervical plate 18 mm with four self drilling screws , cervical plate single level 12 mm , cervical plate single level 10 mm , cervical plate single level 14 mm , cervical plate single level 16mm , floseal hemostatic matrix , 3d printed customised titanium cranial implant , ommaya reservoir large , fibrin glue 2ml , craniofix titanium clamp 11mm //bid details 2 / 44

CTN :45077506

28 May, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of fitting straight connector 8 mm tube 1/4 designed for pressurisied flushing system as per mdts 19027. rev.01. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44855968

09 May, 2026 1.90 Lacs

Bangalore - Karnataka

Tender For corrigendum : tender for supply of connectors -connec , 9-contacts , socket , harpoons continuity metal.strip , angled 4 monoblock hardware , connector , header , st. polorized 2.5mm pitch 5contacts brass tin plated pins. , connector , socket , 1.3dia pin contact , p.c solderable tags(walkman socket). , connector usb port , type b , socket 4p , 4c , single port right angle pc pins shielded 2.54mm pitch , female header , elevated type , single row , 20 pin , gold plated , 3.2mm tail length , connector header , single row , 2 mm pitch , black insulator , gold finish , connector , header , single row st. , 2 ph br pins , 2.54 mm pitch , 0.75u fully gold plated , blk insulator , connector , header , single row , straight , 3 ph br pins , 2.54mm pitch , 0.75u fully gold plated , blk insulator , male header , 2mm pitch , 5 pin , gold plating , pc mount , connector , dc shorting link blue 2.54 mm pitch 0.75 micron selective gold plating , 2 pin berg , 2.54 mm pitch , smd , double row pin header , connector , d type plug 9 male solder contacts g.f polyester insulator j50820/02-036 style , connector , high density 15 pin right angle female with screw lock harpoon , connector , polarised shrouded header , with locking ramp st.pc pins , 3-contacts , tin plated , connector , header , straight , polarised , locking , 3.96mm pitch , 1.14mm sq.pins , 2-contacts , tin plated. , connector header polarised , 4 pin , 2.5mm pitch , connector , header , straight 2.5mm contact pitch , single row 2 contacts , 0.64mm square pin tin plate , connector , header , straight 2.5mm contact pitch , single row 3 contacts , 0.64mm square pin tin plate. , esip spring steel plated clip big , ss clip - device fixing clamp (esip-16j package)

Central Government / Public Sector

CTN :45012771

11 May, 2026 NA

Mancheshwar - Odisha

Tender For supply of set of fittings for pneumatic piping arrgt. consisting of 04 items as follows. 1) male connector 1" od x 3/4 " bspt(m), as per item no.4 of drg. no. icf/std-3-5-016. qty. 01 no. 2) female tee 3/4" bspt(f), as per item no.2 of drg. no. icf/std-3-5-027. qty. 01 no. 3) bulk head male connector 1" od x 3/4" bspt(m), as per item no.2 of drg. no. icf/std-3-5-114. qty. 01 no. 4) straight union 3/4 "od, as per item no.2 of drg. no. icf/std-3-5-015. qty. 01 no. (qty. 190 sets) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45057124

21 May, 2026 NA

Hubli - Karnataka

Tender For supply of set of hex head screw m10 x 70-8.8 for rubber stopper arrangement on bogie frame for crown clearance to drg. no. t-0-1-645, alt-c item no.3 to 7 in assembled condition. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45057007

14 May, 2026 NA

Amritsar - Punjab

Tender For supply of brake hanger bracket on head stock with nylon bushes for 16.25t non-ac bogie frameto drg. no. icf/std-0-3-001/ col.-1, item no. 1 & 5, alt. b. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45057008

14 May, 2026 NA

Amritsar - Punjab

Tender For supply of brake hanger bracket on transom with nylon bushes for 16.25t non-ac bogie frame. drg. no. icf/std-0-3-001/ col.-2, item no.2 & 5, alt. b. [ warranty period: 30 months after the date of delivery ]

Bogie Frame Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors