Latest bogie suspension scrap Tenders | Government bogie suspension scrap Tenders

Central Government/Public Sector

CTN :40010421

09 May, 2025 NA

Jhansi - Uttar Pradesh

Tender For jhansi division -bsz-gtm- ctr (p) - 36.51 tkm & jhansi division -gtm-bzm ctr (p) - 32.23 tkm-ns item :- a) running track site:- replacement of old sleepers and rails (ctr) by dismantling existing track of all types of sleepers by making 13m loose rail panel (or any suitable length panel) with existing sleepers & sh rail (for removing existing track) with wider base sleepers/revised wider base sleepers at density of 1660 sleepers per km assembled with loose rail panel (or any suitable rail length panel of sh rail) in pqrs depot and placing over ballast properly during traffic block after removing panels of old sleeper and sh rail of 13 m loose rail panel (or any suitable length panel) wth the use of contractor's pqrs machine by providing auxilary track with gauge of 3400mm (either with the use of existing rail from existing track or with new rail unloaded by contractor from eur in block as instructed by sse/p-way, (if required) over metal/ wooden sleepers, to be provided by railway, 500 nos./rail km on both rails at the interval of 2m) and providing fish plates for joining loose sh rail over wider base sleeper for continuity of track and maintaining track parameters as per para 522 of irpwm 2020 to keep the track fit for 30kmph. sh rail over new wider base sleepers/revised wider base sleepers to be replaced with newlearlier existing rail on running track (with replacement of rutbber pad, liner & greased erc and greasing of liner contract area. grease to be used should be of 'o' graphite grease as per s code 408). as soon as loose rail length of track reaches 500m/750nm (as per decision of railway site engineer ie. sseje/ p-way), loading of track panel (sh rail over old normal sleeper and tied with erc) of approximately 13 m length over railway wagons and unloading of track panels of the length of 13 m (or any suitable length) and wider base sleepers/revised wider base sleepers will be done during traffic block. trr with the rail of the length of 250 m to 500m (preferably 20rail panel) will have to be done as soon as track of loose rail exceeds 500m length. further the contractor wil follow instructions of sse/p-way to relax speed of track upto maximum speed of section as per schedule laid down in irpwm 2020 para 708 for machine tamping with all machine packing related works such as recoupment of crib ballast, shoulder ballast, boxing and dressing. the whole process wil continue ill completion of work. auxilary track (at) will have to be removed with advancement of ctr work as per direction of railway (sse/jeip-way). b) pqrs depot: track panel with sh rail of 13 m or any suitable length over wider base sleepers/revised wider base sleepers/revised wider base sleepers will be made with necessary fittings in pqrs depot. loading of these panels over railway wagons and unloading of released track panels (released from running track) consisting of all types of rails & sleepers from railway wagon at pqrs depot using contractor's own portal crane including dismantling and stacking each component of track properly at designated locations. (note: this item of complete track renewal with wider base sleeper is a composite item and all activities as required will have to be done by the contractor with his/her own pqrs machine & other machines, tools and plants including all other resources as per requirement of the work (in pqrs depot and during traffic block in running tack). ralway will provide wagons and locomotives free of cost for loading/unloading and transportation tofrom pors depot/work site (running track) for loose rail panels with normal old sleepers and with wider base sleepers/revised wider base sleepers. nothing extra will be paid except the rates as mentioned against the item. raiway will also provide metal/wooden sleepers required for at, free of cost. various activities which are involved in ctr work are elaborated in "sequence of activities provided with tender schedule." (unit- per track km.).

CTN :40010985

21 Apr, 2025 NA

Purba Medinipur - West Bengal

Tender For x ray baggage scanner (single view) (supply, delivery, installation and transportation of the item)

CTN :40005571

28 Apr, 2025 NA

Vapi - Gujarat

Tender For supply, installation, testing and commissioning of electro mechanical works of pumping machinery with associated mechanical and electrical equipments, instruments & accessories etc for different head works of vapi municipal corporation area. - item no.1: submersible type pump setsupply, installation, testing and commissioning of submerged submersible pump sets with suitable for working on three phase, 50 hz3percentage ,415v10percentage ac supply, suitable rpm with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamp, pipe fittings, mechanical seal, bearing bush, strainer, pump sensors and other protection, pump control unit etc. suitable construction of foundation/ installation device with cable length from pumps to panels and of following material of construction:m.o.c :- casing : ci, impeller : ss cf8m, wearing ring and bearing bush : bronze, tc mechanical seal, cs/ss bearing, ss shaft with sleeve, ss strainer and ms motor body fasteners : ss 316l, guide rail : ss 316, lifting chain : ss 316capacity of pump - 833 lpm and 35 m. head (15 kw/ 20 hp) - 1 working + 1 standby. the price should include water in oil sensor and io 113 for mechanical seal and motor protections suitable for each pumps., capacity of pump - 1667 lpm and 35 m. head (18.5 kw/ 25 hp) - 1 working + 1 standby, capacity of pump - 2083 lpm and 35 m. head (22 kw/ 30 hp) - 1 working + 1 standby, capacity of pump - 2500 lpm and 35 m. head (22 kw/ 30 hp) -(only supply of pump set - without installation), capacity of pump - 3333 lpm and 35 m. head (30 kw/ 40 hp) - 1 working + 1 standby, capacity of pump - 5833 lpm and 35 m. head (48.75 kw/ 65 hp) - 1 working + 1 standby, capacity of pump - 8333 lpm and 35 m. head (75 kw/ 100 hp) - 1 working + 1 standby, capacity of pump - 7333 lpm and 45 m. head (82.5 kw/ 110 hp) - 1 working + 1 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp) - 1 working + 0 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp (only supply of pump set - without installation), capacity of pump - 14286 lpm and 35 m. head (110 kw/ 150 hp) - 1 working + 1 standby, capacity of pump - 16667 lpm and 35 m. head (132 kw/ 180 hp) - 2 working + 1 standby, capacity of pump - 25000 lpm and 26 m. head (150 kw/ 200 hp) - 1 working + 1 standby, item no.2: submersible non-clog vertical pumpsupply, installation, testing and commissioning of sewage submersible, non clog type suitable for working on three phase, 50 hz 3percentage , 415 v 10percentage , ac supply, 1450 rpm synchronous speed with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamps, pipe fittings along with mechanical seal, bearing bush, strainer etc. complete set and following m.o.c: casing: ci, impeller: ss cf8m, wearing ring and bearing bush: bronze, tc mechanical seal, cs / ss bearing, ss shaft with sleeve, ss strainer and ms motor body.capacity of pump - 15 kw/ 20 hp - 2 working the price should include water in oil sensor and io 113 for mechanical seal and motor protections., item no.3: manufacture, supply, lowering, laying, jointing, welding and delivery of electric resistance welded (up to 400mm)/submerged arc welded(above 400mm) m.s.pipe having bevelled ends plate or coil conforming to is-3589-2001 or its latest revision/ amendment for following thickness outside diameter at gwssb store or site anywhere in gujarat state including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to departmental stores, stacking etc. all complete charwada 2 - jalaram mandir - 219.1 mm dia. (4.5 mm thick)- delivery pipe, balitha 1 - near kabrsthan - 273 mm dia. (5 mm thick)- delivery pipebalitha 2 - bhandarwada - 273 mm dia. (5 mm thick)- delivery pipechhiri 1 vallabh nagar - 273 mm dia. (5 mm thick)- delivery pipe, dungra - azad nagar - 323.9 mm dia. (5.6 mm thick)- delivery pipe vapi - naikwad tanki - 323.9 mm dia.

CTN :39983673

23 Apr, 2025 NA

Trivandrum - Kerala

Tender For supply of rotary switch wafer and accessories - supply of rotary switch wafer oms (part no. 013-a51513-oms) note: above quoted price should include packing, transportation, and other costs towards delivery of item., index mechanism (part no. 013-a51514-om0) note: above quoted price should include packing, transportation, and other costs towards delivery of item., mounting screw (012-2011-020-02) note: above quoted price should include packing, transportation, and other costs towards delivery of item., nuts (012-2321-103) note: above quoted price should include packing, transportation, and other costs towards delivery of item., lock washer(012-2214-102) note: above quoted price should include packing, transportation, and other costs towards delivery of item.

Central Government/Public Sector

CTN :39756201

28 Apr, 2025 NA

Kanakapura - Karnataka

Tender For corrigendum : supply,installation,commissioning & testing of stainless steel tubes and d ouble ferrule fittings for lhb hot buffet car & amrit bharat lcbnacab coaches, as per d rawing: rcf/md/mat sch/lwcbac , ver-01 , packing instruction: as per standard packing. it sho uld be ensured that item should not rub during transportation. the item should be pa cked with adequate strength. transit damage , if any , shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39619384

18 Apr, 2025 NA

Kapurthala - Punjab

Tender For corrigendum : design, development, supply & installation of the aluminium interior for lh b gs coaches (no gaps/crevices in interior)., as per drawing: as per design letter no. md46 141 dated 18.02.2025, packing instruction: as per standard packing. it should be ensured th at item should not rub during transportation. the item should be packed with adequat e strength. transit damage , if any , shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39679625

15 Apr, 2025 NA

Sonbhadra - Uttar Pradesh

Tender For corrigendum : custom bid for services - work comprises of combined job contract of chemistry for ntpc rihand-line item 10. job of chemistry st-i, ii &iii item 10.10 1. the scope of work involves deployment of one or two open pick up jeep/ truck/ tractor trolley for 08 hrs. for transportation of material -bulk chemicals from store to site and/or from one place to another within plant and township as per the instructions of eic. 2. the open pick up jeep/ truck/ tractor trolley (one or two nos) with fuel, driver, helper and required numbers of manpower for min. 10 mt material. handling within 08 hrs. of deployment in a day is to be considered. 3. the payment will be done based on tonnage of material. handled in a day. for calculation of rate per mt, total tonnage of min.10 mt per day is to be considered. cost of deployment for transportation of 10 mt material shall be inclusive of cost of hiring of vehicle with driver, helper along with cost of fuel for total running of 50 km in a day and 4 nos. of usw (04-man days of usw) for material handling. this is only for the purpose of rate calculation on tonnage basis for transportation of bulk chemical. hiring charges of vehicle taken from rihand system circular 20/03 for hiring of vehicle. 4. quantity per trip and the number of trips in a day shall be decided by the eic. 5. the tractor deployed by the agency must be in good working condition and should have valid papers; viz, registration, fitness and insurance and driving license of the driver. 6. eic may call for deployment of tractors at short notice on any day/ time as per requirement. 7. a penalty equal to double the rate (10 mt) admissible shall be imposed in case of failure of deployment as per instruction. 8. rate admissible on firm price basis. price variation on the grounds cost of hiring/ fuel price and/or manpower cost shall not be admissible during the tenure of contract. item 10.20 1. transportation of material, bulk chemicals, lab. consumables, lab. instruments, gas cylinders, office furniture etc. from store to site; scrap, solid waste, debris and coal from one place to another within plant and township area as per the instructions of eic. open pick-up jeep/ truck/ tractor trolley with required numbers of laborers is to be provided for the purpose. 2. the payment will be done based on the trip a day. loading of material in tractor at one site, its transportation, unloading and stacking of material at the destination site shall constitute one trip. 3. for calculation of rate per trip, min. two trips in 8 hrs. deployment per day is to be considered. cost of deployment for 2 trips per day shall be inclusive of cost of hiring of vehicle with driver, helper along with cost of fuel for total running of approx. 40 km in a day and 2 nos. of usw (02-man days of usw) for material handling. this is only for the purpose of calculation of rate per trip for transportation of material mentioned above. hiring charges of vehicle taken from rihand system circular 20/03 for hiring of vehicle. 4. quantity of material per trip and the number of trips in a day shall be decided by the eic. 5. vehicle deployed by the agency must be in good working condition and should have valid papers; viz, registration, fitness and insurance and driving license of the driver. 6. eic may call for deployment of vehicle at short notice on any day/ time as per requirement. if required two vehicle may deployed. 7. a penalty equal to double the rate admissible shall be imposed in case of failure of deployment as per instruction. technical specification section -v 8. rate admissible on firm price basis. price variation on the grounds cost of hiring/ fuel price and/or manpower cost shall not be admissible during the tenure of contract. item 10.30 1. the job involves shifting of bulk chemicals, reagents to different sites in general shift. batch wise preparation of different bulk chemical solution for pt and dm plant area in general shift including sundays &

Central Government / Public Sector

CTN :39920465

18 Apr, 2025 NA

Panipat - Haryana

Tender For supply of supply of chassis mounted fire fighting equipment trailer trolley mounted fire fighting equipment - items as per sr. no. 01.001 of mr , supply of items as per sr. no. 01.002 of mr , supply of items as per sr. no. 01.003 of mr , supply of items as per sr. no. 01.004 of mr , site work for sr. no. 02.001 of mr , site work for sr. no. 02.002 of mr , site work for sr. no. 02.003 of mr , site work for sr. no. 02.004 of mr , transportation from vendors works to site for mr item sr. no. 01.001 , transportation from vendors works to site for mr item sr. no. 01.002 , transportation from vendors works to site for mr item sr. no. 01.003 , transportation from vendors works to site for mr item sr. no. 01.004 , supply of mandatory spares for mr item sr. no. 01.001 , training at site for mr item sr. no. 01.001 , training at site for mr item sr. no. 01.002 , training at site for mr item sr. no. 01.003

CTN :39643329

19 Apr, 2025 NA

Shimla - Himachal Pradesh

Tender For corrigendum : procurement of machinery and equipment on behalf of national health mission - ot table, anaesthesia work station, defibrillator, phototherapy unit, x-ray mobile, x-ray machine 500 ma, x-ray machine 300 ma, colour doppler ultrasound machine, hysteroscopy set, manual vacuum extractor, radiant warmer, cpap, mobile c-arm machine (image intensifier), ot light (shadowless lamp ceiling type major), video laryngoscope, flash autoclave, washer disinfector, examination treatment light, pulse oximeter, line powered beside neonatal, surgical diathermy bipolar, note :- 1.the basic price of the goods to be quoted without gst.2.all the prices should be quoted in indian rupee (inr) only.3.the cmc should be quoted year wise without gst.4.cmc rate and turnkey work (if any) shall be included for determining l-1 bidder.5.gst shall be payable as applicable from time to time.6.charges towards packing & forwarding, inland transportation, insurance (local transportation and storage) would be borne by the supplier from warehouse to the consignee site, loading/unloading and other local costs incidental to delivery of the goods to their final destination as per section-i shall also be borne by the supplier.7.the price should be inclusive of supply, installation, commissioning charges.8.l-1 will be determined item-wise on total basic price of the equipment (all inclusive) (excluding gst) + total cmc (if any) (excluding gst) + turnkey work (if any) (excluding gst) for all the items as mentioned in section-i.9.in case of optional accessories/items (if any), rates may quoted in separate pdf file (along with the price bid), which will not be considered for determining l-1 bidder. it is reiterated that the bidder should not submit this in the technical bid.it is certified that the cost of goods shown above, is all inclusive except gst.signature of authorizedsignatory with seal

CTN :39527149

15 Apr, 2025 NA

Kamrup - Assam

Tender For corrigendum : supply of coated line pipes as per api 5l, x-56, 12 3/4 inch (323.9 mm) od - item a , inland transportation upto delivery location and other costs item no. a , coated line pipes as per api 5l, x-52, 6 5/8 inch (168.3 mm) od - item b , inland transportation upto delivery location and other costs item no. b

Bogie Suspension Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector