Latest boiler motor Tenders | Government boiler motor Tenders

Central Government/Public Sector

CTN :40246331

05 Jun, 2025 NA

Mumbai - Maharashtra

Tender For supply, installation, testing and commissioning of electric baking oven 100 kw for drying an d baking of traction motor having capacity of 2 tm at a time as per technical specification attached as ann exure-a. [ warranty period: 30 months after the date of delivery ]

CTN :40252653

28 May, 2025 7.53 Lacs

Jalpaiguri - West Bengal

Tender For supply of thermography test njp top , transformer oil test with b relay test njp top , relay testing , vcb relay testing and servicing , wti and oti calibration , motor and cable insulation testing , electrical safety audit , ht line pi testing , ten delta testing of transformer for oil and winding , rubber mat and 2 pair electrical gloves insulation testing , ammeter and voltmeter testing , acb testing and servicing

CTN :40005571

08 May, 2025 NA

Vapi - Gujarat

Tender For corrigendum : supply, installation, testing and commissioning of electro mechanical works of pumping machinery with associated mechanical and electrical equipments, instruments & accessories etc for different head works of vapi municipal corporation area. - item no.1: submersible type pump setsupply, installation, testing and commissioning of submerged submersible pump sets with suitable for working on three phase, 50 hz3percentage ,415v10percentage ac supply, suitable rpm with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamp, pipe fittings, mechanical seal, bearing bush, strainer, pump sensors and other protection, pump control unit etc. suitable construction of foundation/ installation device with cable length from pumps to panels and of following material of construction:m.o.c :- casing : ci, impeller : ss cf8m, wearing ring and bearing bush : bronze, tc mechanical seal, cs/ss bearing, ss shaft with sleeve, ss strainer and ms motor body fasteners : ss 316l, guide rail : ss 316, lifting chain : ss 316capacity of pump - 833 lpm and 35 m. head (15 kw/ 20 hp) - 1 working + 1 standby. the price should include water in oil sensor and io 113 for mechanical seal and motor protections suitable for each pumps., capacity of pump - 1667 lpm and 35 m. head (18.5 kw/ 25 hp) - 1 working + 1 standby, capacity of pump - 2083 lpm and 35 m. head (22 kw/ 30 hp) - 1 working + 1 standby, capacity of pump - 2500 lpm and 35 m. head (22 kw/ 30 hp) -(only supply of pump set - without installation), capacity of pump - 3333 lpm and 35 m. head (30 kw/ 40 hp) - 1 working + 1 standby, capacity of pump - 5833 lpm and 35 m. head (48.75 kw/ 65 hp) - 1 working + 1 standby, capacity of pump - 8333 lpm and 35 m. head (75 kw/ 100 hp) - 1 working + 1 standby, capacity of pump - 7333 lpm and 45 m. head (82.5 kw/ 110 hp) - 1 working + 1 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp) - 1 working + 0 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp (only supply of pump set - without installation), capacity of pump - 14286 lpm and 35 m. head (110 kw/ 150 hp) - 1 working + 1 standby, capacity of pump - 16667 lpm and 35 m. head (132 kw/ 180 hp) - 2 working + 1 standby, capacity of pump - 25000 lpm and 26 m. head (150 kw/ 200 hp) - 1 working + 1 standby, item no.2: submersible non-clog vertical pumpsupply, installation, testing and commissioning of sewage submersible, non clog type suitable for working on three phase, 50 hz 3percentage , 415 v 10percentage , ac supply, 1450 rpm synchronous speed with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamps, pipe fittings along with mechanical seal, bearing bush, strainer etc. complete set and following m.o.c: casing: ci, impeller: ss cf8m, wearing ring and bearing bush: bronze, tc mechanical seal, cs / ss bearing, ss shaft with sleeve, ss strainer and ms motor body.capacity of pump - 15 kw/ 20 hp - 2 working the price should include water in oil sensor and io 113 for mechanical seal and motor protections., item no.3: manufacture, supply, lowering, laying, jointing, welding and delivery of electric resistance welded (up to 400mm)/submerged arc welded(above 400mm) m.s.pipe having bevelled ends plate or coil conforming to is-3589-2001 or its latest revision/ amendment for following thickness outside diameter at gwssb store or site anywhere in gujarat state including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to departmental stores, stacking etc. all complete charwada 2 - jalaram mandir - 219.1 mm dia. (4.5 mm thick)- delivery pipe, balitha 1 - near kabrsthan - 273 mm dia. (5 mm thick)- delivery pipebalitha 2 - bhandarwada - 273 mm dia. (5 mm thick)- delivery pipechhiri 1 vallabh nagar - 273 mm dia. (5 mm thick)- delivery pipe, dungra - azad nagar - 323.9 mm dia. (5.6 mm thick)- delivery pipe vapi - naikwad tanki -

corporations/Associations/Others

CTN :40240892

22 May, 2025 35.25 Lacs

Ahmedabad - Gujarat

Tender For supply, installation, testing and commissioning work of non-clog type vertical submersible pump-motor set at wastewater sump and end suction pump at back wash pump house at 200 mld raskawater treatment plant.

CTN :39919669

13 May, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of pressure regulating valve ( prv) 400 bar to 250 bar , hp air compressor with electrical motor , installing, testing, commissioning and training for hp air compressor and prv

CTN :39706342

14 May, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of 144 tr magnetic bearing ac plant complete set as per sotr including all accessories , chilled water pump with motor , starter panel , shock mounts , gauges , flange connections as per sotr , sea water pump with motor , starter panel , shock mounts , gauges , flange connections as per sotr , on board spares as per sotr , b&d spares as per sotr only two copressors to be considered as part of b&d , onboard maintance tools as per para 2(d) , 2(h) of chapter 9 of sotr , training charges for o&m training to in personnel , documentation charges as sotr , type testing charges as per sotr and sqap , stw and installation charges (including the scope of work mentioned in para 1 of atc (k) & (l)

Central Government/Public Sector

CTN :40231244

12 May, 2025 NA

Kanpur - Uttar Pradesh

Tender For supply, installtion, testing and commisiioning of 3-phase,7.5 hp,2-pole,415 v,2800 rpm induction motor having flange of inner diameter 180 mm and outer diameter 250 mm.as p er specification attached. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40232148

27 May, 2025 NA

Mumbai - Maharashtra

Tender For supply , installation, testing & commissioning of tank mounted air cooled elect ric driven oil lubricated silenced screw compressor with suitable refrigerated air dryer & its accessories, safety devices, power & control panel etc.with following specification- 1) normal working pressure - 10-12 kg/cm2 2) max pressure-11-12 kg/cm2 3) max humidity-95% 5) cooling system -air cooled 6) free air delivery - 50-100 cfm 7) tank capacity- 250-500 liters 8) 415 volt , 50 hz , 3 phase induction motor- rating-15-25 hp ,ie-2,duty-s1, tefc, ip-55, insulation class-f, 9) drive type-gear drive 10) discharge air purity in respect of humidity, liquid water & solid particle-class 1 as [per is 8573-1 ]

Central Government/Public Sector

CTN :40078601

14 May, 2025 NA

Namchi - Sikkim

Tender For corrigendum : supply of main supply single girder eot crane 5t excluding lt rail along with all accessories as per technical specification , main supply lt rail with all the fitting arrangements , main supply tools and tackles as per clause 7 of section 1 of technical specification , spares supply electric motor for lt unit 1 number of each type , spares supply set of brake lining pad motor springs seal kit solenoid coil etc complete with rivets etc for each type brake supplied for lt unit , spares supply limit switches for lt unit 1 number of each type , spares supply set of brake lining pad motor springs seal kit solenoid coil etc complete with rivets etc for each type brake supplied for ct unit , spares supply electric motor for ct unit , spares supply limit switches for ct unit 1 number of each type , spares supply wire rope 1 full length , spares supply set of brake lining pad motor springs seal kit solenoid coil etc complete with rivets etc for each type brake supplied for main hoist , spares supply electric motor for main hoist 1 number of each type , spares supply limit switches for main hoist 1 number of each type , spares supply circuit breaker of each type , spares supply fuses including fast acting fuses used in thyristor circuits 2 numbers of each type , spares supply indicating lamps led 2 numbers of each colour red blue green amber white etc , spares supply overload relays and time delay relay 2 numbers of each type , spares supply bearings for wheels gear boxes hooks hoist drum and motors for complete crane , spares supply push button of each type 2 numbers of each colour red blue green amber white etc , spares supply module rectifier mosfet thyristor 1 number for each mh ct and lt , spares supply vvvf drive 1 number for each mh ct and lt , erection testing and commissioning at site for single girder eot crane 5t excluding lt rail , erection testing and commissioning at site for lt rail

CTN :40218973

13 May, 2025 34.46 Lacs

Channarayapatna - Karnataka

Tender For procurement of lab equipments for quality control lab of no.1 hrbhlc subdivision q.c channarayapatna - supply, installation, testing and commissioning specific gravity bottle-100ml conforming to is2386 mis-401-1 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 3.35mm , item code aim-05304 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 10mm , item code aim-05337 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning environmental test chamber eco friendly with cooling temperature range-10c to 60c +-1c, humidity-50% to 95% + -4%, double walled, inner chamber ss 304, digital controller cum indicator, size - 610x610x610mm, item code aim-9878 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning digital compression testing machine, capacity 1000kn, range 1000kn, least count 0.1kn, max.clearance between platens 390mm, 260mm, platen size 222.0 dia, piston dia 157mm, piston stroke 50mm, specimen size 100mm & 150mm cube, 100mm dia x 150mm dia cylinder, one electric motor, single phase 220v, 50hz, ac supply digital display, item code aim-314e-dg-1 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning vibration machine, with built-in digital timer, nabl calibrated - as per is4031, machine is supplied with one cube mould with isi certification mark and poking rod. suitable for operation on 220v, 50hz, single phase, ac supply. item code aim-418-2 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 90 microns, item code aim-05325 with all lead and lift complete as per directions of the engineer-in-charge of work. , supply, installation, testing and commissioning heating gloves item code aim-132 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation,testing and universal automatic compactor aim-11001-ms ,compaction mould 100mm id, 127.3mm height 1000ml volume,complete with collar and base plate, made of mild steel and aim-11101-ms - compaction mould 150mm id, 127.3mm height 2250ml volume, rammer - circular faced 50mm dia adjustable to 2.6kg or 4.9kg weight, drop - adjustable to 310mm or 450mm.with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation,testing and commissioning digital laboratory california bearing ratio test apparatus , as per is2720 (part xvi). suitable for operation on 220v, 50hz, single phase, ac supply,digital indicator. no of channels - 2 nos, load cell , capacity - 50 kn compression type, maximum overload -110% of the rated capacity, item code aim-121-4-ms with all lead and lift complete as per directions of the engineer-in-charge of work, supply, installation, testing and commissioning core cutter - ref. standard is2720 (part 29) , core cutterof known volume is driven into the soil by a rammer. the core cutter is dug out, trimmed and the soil inside weighed and dried for moisture and density check. replaceable parts steel dolly, 25mm high and 100mm dia item code aim-161 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning core cutter - ref. standard is 2720 (part 29) , core cutter of known volume is driven into the soil by a rammer. cylindrical core cutter, made of steel 100mm dia x 130mm long, steel dolly, 25mm high and 100mm dia rammer with steel rod item code aim-161 with al

Boiler Motor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector