Latest boiler tube Tenders | Government boiler tube Tenders

State Government

CTN :40799810

05 Jul, 2025 1.26 Crore

Bellary - Karnataka

Tender For erection and dismantling of cuplok scaffolding system,water washing,descaling of furnace and d meter survey of boiler tubes bends along with replacement of eroded tubes bends for unit3 700mw boiler of btps

State Government

CTN :40616503

15 Jul, 2025 8.00 Crore

Kota - Rajasthan

Tender For corrigendum : surgical items (918 items) - suction catheter, sterile. size: fg 5 (for use in respiratory tract) soft, kink resistant tubing rounded open tip with lateral eye colour coded universal funnel connector for safe connection to standard suction equipment length 50 cm (min.) should conform to is0 8836:2014, suction catheter, sterile. size: fg 6 (for use in respiratory tract) soft, kink resistant tubing rounded open tip with lateral eye colour coded universal funnel connector for safe connection to standard suction equipment length 50 cm (min.) should conform to is0 8836:2014, suction catheter, sterile. size: fg 8 (for use in respiratory tract) soft, kink resistant tubing rounded open tip with lateral eye colour coded universal funnel connector for safe connection to standard suction equipment length 50 cm (min.) should conform to is0 8836:2014, suction catheter, sterile. size: fg 10 (for use in respiratory tract) soft, kink resistant tubing rounded open tip with lateral eye colour coded universal funnel connector for safe connection to standard suction equipment length 50 cm (min.) should conform to is0 8836:2014, suction catheter, sterile. size: fg 12 (for use in respiratory tract) soft, kink resistant tubing rounded open tip with lateral eye colour coded universal funnel connector for safe connection to standard suction equipment length 50 cm (min.) should conform to is0 8836:2014, suction catheter, sterile. size: fg 14 (for use in respiratory tract) soft, kink resistant tubing rounded open tip with lateral eye colour coded universal funnel connector for safe connection to standard suction equipment length 50 cm (min.) should conform to is0 8836:2014, suction catheter, sterile. size: fg 16 (for use in respiratory tract) soft, kink resistant tubing rounded open tip with lateral eye colour coded universal funnel connector for safe connection to standard suction equipment length 50 cm (min.) should conform to is0 8836:2014, suction catheter, sterile. size: fg 18 (for use in respiratory tract) soft, kink resistant tubing rounded open tip with lateral eye colour coded universal funnel connector for safe connection to standard suction equipment length 50 cm (min.) should conform to is0 8836:2014, suction catheter, sterile. size: fg 20 (for use in respiratory tract) soft, kink resistant tubing rounded open tip with lateral eye colour coded universal funnel connector for safe connection to standard suction equipment length 50 cm (min.) should conform to is0 8836:2014, suction catheter, sterile. size: fg 22 (for use in respiratory tract) soft, kink resistant tubing rounded open tip with lateral eye colour coded universal funnel connector for safe connection to standard suction equipment length 50 cm (min.) should conform to is0 8836:2014, mucus extractor sterile clear transparent container antibacterial filter soft, kink resistant pvc tubing tube size 10 fg; length 40 cm (min.) capacity 25 ml, nasal oxygen cannula (set), twin bore (accessory forcompressed air breathing) all sizes (adult) soft and kink resistant pvc tubing multichannel / star lumen to preventing accidental kinking twin bores should ensure equal volume of oxygen to both air passages connector for easy connection to the oxygen source tube length 200 cm, nasal oxygen cannula (set), twin bore (accessory forcompressed air breathing) all sizes (pediatrics) soft and kink resistant pvc tubing multichannel / star lumen to preventing accidental kinking twin bores should ensure equal volume of oxygen to both air passages connector for easy connection to the oxygen source tube length 200 cm, ryles tube / nasogastric tube (p.v.c.) with radio opaque lining. size: 10 soft, kink resistant pvc tubing for atraumatic intubation closed distal end should be coned with radio opaque material for accurate intubation four lateral eyes for greater efficiency radio opaque line marking at 50, 60, 70 cm from tip colour coded funnel with luer connector / closure length 105 cm, ryles tube /

CTN :40804505

30 Jun, 2025 NA

Baghpat - Uttar Pradesh

Tender For boiler tubes fabrication and erection work year 2025-26

CTN :40506872

21 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For bid to ras purchase of spares - weasher 3 by 8 inch bsf , o ring , nut brush terminal(os sl no-187) , bearing cap bolt(os sl no-7) , spnr de 14x15mm(ces cps260) , bolt self lock 1.5 inch f by whsg , hexagon socket screw (os sl no-142) , stud for silencer connection , set screw for front cover(os sl no-157) , nut cyl head , o ring , dowel pin (os sl no-133) , joint (os sl no-140) , joint (os sl no-111) , nut for air cleaner mtg stud (os sl no-149) , spl screw 5 by 16 bsf , o ring for rocker bracket , stud 5 by 16 inch x 1.25 inch long , joint , bearing bush de , joint for transfer block (os sl no-122) , joint (os sl no- 128) , bolt crankshaft to adaptor , special simmonds nut , spring , stud for injector pipe clamp , locking plate (os sl no-16) , joint (os sl no-103) , shim 0.0003 feet thick (os sl no-131) , shim 0.0005 feet thick(os sl no-132) , gasket(os sl no-188) , hose 9 by 16-0.5mtr , gasket , joint (os sl no-141) , o ring for delivery pipe flange , bolt (ms sl no-117) , joint for air clearance base (os sl no-150) , insulating washer (os sl no-190) , rubber faced washer for cyl head cover (os sl no-1 , stud cyl head to ex manifold (os sl no-151) , valve cap(p-21) , timing pointer (os sl no-58) , bolt fly wheel (p-57) , abutment washer , rubber shroud (os sl no-137) , split pin (os sl no-207) , jublee clip (os sl no-255) , exhaust manifold gasket (os sl no-153) , gasket cover cylinder(chicago260) , joint timing case to back plate , circlip (os sl no-202) , plug (p-37) , joint back plate to crank case , plier insulated 150mm(ces-34) , joint for inlet manifold (os sl no-148) , joint for rear cover (os sl no-163) , o ring (p-11) , o ring (os sl no-121) , joint for front cover (os sl no-159) , locator pos terminal (os sl no-191) , ferrule , connection piece , gasket for discharge pipe , gasket for discharge pipe , grease cap 3 by 8 bsf(chicago) , oil seal (os sl no-129) , insulator washer (os sl no-192) , filer element assy , joint for side cover rh rear (os sl no-162) , brush spring , spring inner , hammer engineer ballpein 0.5 kg , brush(a l page-109) , hose 9 by 16-1.8mtr , bearing bush , o ring (os sl no-96) , felt pad (os sl no-224) , banjo bolt , tab washer , joint crankshaft seal hsg to f by w hsg (os sl no-66) , insulator (os sl no-186) , tee coonection(p-13) , hose 9 by 16-2mtr , brush connector positive , valve spring , valve , l bracket (p-55) , dowel pin(dia14x30)(ces-33) , joint for side cover rear to c by c(os sl no-161) , centre tube (os sl no-155) , bolt , main bearing cap (p-7) , bush assembly , ceramic insert (os sl no-136) , joint (ms sl no-16) , heatsink assy positive , bushing body o pump (p-7) , s assy of pipe feed pump to filter (os sl no-102) , covering plate (os sl no-70) , oil seal , oil seal burton wood(ctlg p-23) , oil relief valve(ms sl no-03) , anti vibration mount(p-25) , set screw (os sl no-50) , oil filter cap (os sl no-167) , s assy of pipe feed pump to filter (os sl no-104) , tee connection(p-13) , s a of pipe filter to fuel pump(os sl no-105) , spring (pinion)(os sl no-212) , fan belt (oem) , auxiliary diode , insulator (os sl no-195) , kit thrust washer(os sl no-4) , plug(p-29) , water pump seal (os sl no-135) , o ring (p-29) , lead assy y positive (os sl no-189) , o ring(p-3) , s a of pipe oil , c e bearing (os sl no-231) , regulator , flexible hose(p-29) , roller bearing hofman (os sl no-83) , ball bearing hoffman (os sl no-84) , o ring(p-3) , front cover (os sl no-156) , taper roller bearing (os sl no-130) , heat sink assy aux (os sl no-197) , driving shaft (os sl no-134) , joint housing to back plate(ms sl no-67) , bush assembling kit(p-61) , element filter , filter service indicator(chicago p-20) , liner cyl s by s outer dia y (p-7) , de bearing , p2p controller service kit(os em r655 dt 01.02.19) , bearing sre , hose filter to fuel pump , rotor assy(a l page-99) , ring set(p-15) , cable(p-11) , kit main bearing(chicago) , oil by pass valve , s a of fan 19.5 in dia 6 blade (os sl no-12

CTN :40491339

24 Jun, 2025 17.52 Lacs

Bardhaman - West Bengal

Tender For corrigendum : providing of custom bid for services - development of boiler tubes/ 3d bends (ssc/25045)

Co-operative

CTN :40779260

02 Jul, 2025 NA

Farrukhabad - Uttar Pradesh

Tender For cleaning of boiler tube

Central Government/Public Sector

CTN :40755143

28 Jun, 2025 98.42 Lacs

Murshidabad - West Bengal

Tender For providing of custom bid for services - inspection of sh and rh boiler tubes and bends by aet.

Central Government/Public Sector

CTN :40211690

28 Jun, 2025 NA

Singrauli - Madhya Pradesh

Tender For corrigendum : tender for supply of boiler tube bends - bend rh crossover 1018 2025 133 a3 , bend rh crossover 1018 2025 137 a3 , bend rh crossover 1018 2025 135 a3 , bend rh crossover 1018 2025 136 a3 , bend rh o l pnl 1018 2025 132 a3 , bend rh crossover 1018 2025 138 a3 , bend rh o l pnl 1018 2025 131 a3 , bend rh o l pnl 1018 2025 130 a3 , bend rh crossover 1018 2025 134 a3 , bend rh o l 1018 2025 129 a3 , u bend 180d bmd pp eco 01 44 5x5x651mm , tube bend eco sa210m c 90deg 500x200mm

Central Government/Public Sector

CTN :39670377

26 Jun, 2025 NA

Raigarh - Chhattisgarh

Tender For corrigendum : tender for supply of alloy boiler tubes - tube , strt , as , a213-t12 , 38mm , 6.8mm , 4-7m , tube , strt , smls , as , a213-t12 , 60.3mm , 4mm , tube , strt , smls , as , a213-t22 , 48.3mm , 4mm , tube , strt , as , a213-t22 , 38.1mm , 9.09mm , tube , strt , as , a213-t22 , 38.1mm , 10.6mm , tube , strt , as , a213-t22 , 42.4mm , 8.3mm , tube , strt , a213-t22 , 63.50mm , 5.08mm , tube , strt , as , a213-t22 , 42.2mm , 4mm , 4-7m , tube , strt , as , a213-t22 , 32mm , 6mm , 7-10m

State Government

CTN :40767741

05 Jul, 2025 NA

Parli - Maharashtra

Tender For work of boiler tube thickness survey & testing, fibro-scopic inspection of headers during annual overhaul of unit 8, bm 250mw,tps parli-vaijnath.

Boiler Tube Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Co-operative

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government