Latest bolt machine Tenders | Government bolt machine Tenders

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

Central Government And Public Sector

CTN :45730196

16 Jul, 2026 NA

Bhilai - Chhattisgarh

Tender For supply of lock bolting machine with power pack and tool size- 1/2, 3/4, 5/8" & 7/8" for manufacturing of new wagon with all concomitant accessories as per annexure-a & b. make: stanley, huck, avlock, hitesh udyog or similar. [ warranty period: 30 months after the date of delivery ] ]

CTN :45733162

01 Jul, 2026 NA

Jamalpur - Bihar

Tender For supply spare parts of power pack assembly of huck bolting machine compatible with power pack unit of orione make huck- bolting machine model no.-ohpl-p540, as per attached annexure, qty.- 01 set. (one set consist of sl. no. 01 to 14, total nos. of items-64 nos.) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45724942

20 Jul, 2026 26.89 Lacs

Dipka - Chhattisgarh

Tender For supply of control unit assy se57110 , horn unit se57392 , sensor cable assy se53922 , sensor cable assy se53944 , sensor cable assy se53727 , sensor cable assy 20ft se59276 , dcp cylinder 20kg se57510 , nitrogen cylinder assly 0 point 5 lit se57112 , nitrogen cylinder assly 0point 5 litre se57549 , end of line resistor unit se53799 , pilot cylinder assy gl se57146 , pilot cylinder assy se57322 , dry chemical powder 1 no dry chemical powder packed in 1 kg se53753 , co2 cartridge 300 gm se53994 , rupture disc assy dcp cylinder se54686 , sensor mounting clip se54462 , nozzle bracket assy se543231 , teflon bush se543351 , dust cap se53835 , nozzle conical se535082 , main cable assy se57118 , main cable assy se57570 , main cable assy se57189 , main cable assy se573741 , pipe cross 4 way se535123 , pipe cross mtg bracket se54115 , m6 x 125 bolt se53625 , m8 x 65 bolt se53610 , m8 nut se53611 , star washer se58193 , cylinder clamp se57491 , m6 boss se53636 , m6 spring washer se53626 , coupler 1by2 inch se53518 , elbow 1by2 inch se535021 , 3by4 inch elbow with chuknut se53630 , 3by4 inch coupler se53570 , tee 3by4 inch bsp se53757 , 3by4 inch hose assy 4000 mm se5352221 , 3by4 inch hose assy 2000 mm se5352222 , 3by4 inch hose assy 1800mm se5352223 , 3by4 inch hose assy 1200mm se5352224 , 1by2 inch hose assy 800 mm se5352212 , 1by2 inch hose assy 1100 mm se5352216 , 1by2 inch hose assy 1000 mm se5358418 , 1by2 inch hose assy 1500 mm se5352210 , 1by2 inch hose assy 1600 mm se535845 , 1by2 inch hose assy 1700 mm se5352214 , 1by2 inch hose assy 1800 mm se535229 , 1by4 inch hose assy band on one end 700mm se5352279 , 1by4 inch hose assy band on one end 4000mm se5352243 , 1by4 inch hose assy band on one end 3500mm se5352227 , 1by4 inch hose assy band on one end 5000mm se5358497 , clean agent cyl assy 6kg pneuvalve se59277 , dcp cylinder mounting bracket se57519 , portable cylinder se53836 , override unit se54453 , control unit mtg bracket se57120 , nitrogen cylinder assly se57480 , distributor 5 way se535121 , over ride unit bracket se57117 , decal ground level se544681 , decal cabin se54469 , nut m6 se53634 , m10 nut se53606 , m10by40 bolt se53605 , m6 x 25 bolt se53681 , m10 x 25 bolt se53679 , m8 x 20 bolt se53608 , m8 spring washer se53609 , m10 spring washer se53607 , 3by4 inch hose assy with l bend one end 2500mm se5352262 , 1by2 inch hose assy 2000 mm se535849 , 1by4 inch hose assy l bend on both end 1800mm se5352234 , main cable assy se57281 , sensor cable assy 30ft se53729 , dcp cylinder 125 kg se57186 , clamp for dcp cylinder se57185 //bid details 2 / 65

Central Government/Public Sector

CTN :43696133

01 Jul, 2026 NA

Nashik - Maharashtra

Tender For bid to ras corrigendum : supply of osaero job work for manufacturing of 73 parts parts ref semfg677 d d -1 end nut , 2 floating bush , 3 special washer , 4 second stage spacer , 5 separator , 6 recoil sleeve , 7 top bearing , 8 rupture plate housing , 9 orifice plate , 10 rupture disc spacer , 11 attachment pin , 12 spacer , 13 plunger , 14 orifice plate , 15 orifice nut , 16 end nut , 17 second stage spacer , 18 separator , 19 recoil sleeve , 20 top beraing , 21 bottom gland , 22 rupture plate housing , 23 orifice plate , 24 axle cross-bolt , 25 oleo attachment pin , 26 oleo attachment nut , 27 main axle nut , 28 cap , 29 bush outboard , 30 bush inboard , 31 bushinb0ard. , 32 bush-axle cross bolt. , 33 bush cross tube hub , 34 bush axle hub , 35 cross tube , 36 washer-1 , 37 washer-2 , 38 lashing ring bolt , 39 lashing ring washer , 40 bush washer , 41 installation pin , 42 stepped washer , 43 bush , 44 bush cross bolt , 45 flanged bush-lug , 46 bush-lug , 47 bush lock , 48 bush1-hub , 49 bush2-hub , 50 housing-tail lock , 51 pin-tail lock , 52 spacer-outer bearing , 53 spacer-inner bearing , 54 washer-tail axle , 55 bottom spacer , 56 top spacer , 57 spacer housing , 58 guide arm , 59 housing bolt , 60 face seal , 61 bush-damper , 62 axle , 63 bush-axle , 64 bush-1 , 65 sleeve - tail wheel , 66 piston rod , 67 piston , 68 seal-ptfe , 69 pin , 70 piston rod , 71 bush outboard , 72 stepped washer , 73 cap-fork

Central Government/Public Sector

CTN :45717821

22 Jul, 2026 NA

Katni - Madhya Pradesh

Tender For supply of huck bolt machine as per attached annexure - a [ warranty period: 30 months after the date of delivery ] ]

CTN :45432623

02 Jul, 2026 NA

Tiruvallur - Tamil Nadu

Tender For corrigendum : supply of c12m260040 - 3112569004 - rupture disc size 6in rls 316 compression loaded reverse buckling scored , 3102100224 - 94-c-102 sulphur coalescer dia600mm demister shall be supplied as per cpcl

CTN :45688646

16 Jul, 2026 NA

Mahendragiri - Tamil Nadu

Tender For supply of rupture disc type 1 , rupture disc type 2 , rupture disc type 3 , rupture disc type 4 , rupture disc type 5 , rupture disc type 6 , rupture disc type 7 , rupture disc type 8 , rupture disc type 9 , rupture disc type 10a , rupture disc type 10b , rupture disc type 10c , rupture disc type 11 , rupture disc type 12 , rupture disc type 13a , rupture disc type 13b , rupture disc type 13c , rupture disc type 14 , rupture disc type 15 , rupture disc type 16 , rupture disc type 17 , rupture disc type 18