Get complete information related to latest Bolt Fastener Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Bolt Fastener Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Bolt Fastener Tenders.
Tender For providing and fixing m.s. bracket with all necessary accessoriesas mentioned in drawing (item include anchor fastener withepoxy grout, nut- bolt, m.s. plate etc. all completed) to erect anelectric pole at various bridges in surat city limit.
Tender For supply of earth clamp 300 amps , round rod ms 12 mm , round rod ms 10 mm , round rod ms 15 mm , ss bolt nut and washer , ss bolt cutting wheel , electrode ms 3 point 15 mm
Tender For supply of m.s. black hex head bolt to is: 1363(pt-1)/2019, rev-5/iso 4016 , m20x75, property cla ss 4.8 with m.s. black hex nut to is:1363(pt-3)/2018, 21 rev-5/iso 4034, m20 , property class-4.5 [ w arranty period: 30 months after the date of delivery ]
Tender For supply and installation of children play equipments under mplads funds of parliamentary constituency new delhi, south delhi and chandni chowk for various locations of parks in municipal corporationof delhi - supply & installation of children play equipments under mplads funds of parliamentary constituency new delhi, south delhi & chandni chowk for various locations of parks in municipal corporationof delhi, supply and fixing of four seated merry go round. area: 1.5 m. height 0.8 m. seat moulded f.r.p. main frame: 40 nb g.i. pipe. bearing : heavy duty bearing. ms plate: 250x10mm. support pipe- 80nb. the topcoat is duly powder coated. the item shall be having its main frame made up of 25 & 40. mm nb b class g.i. pipe. the stand shall be made in 80 mm nb b class g.i. pipe. the whole structure shall be mounted on heavy duty bearing shaft. the bearing used shall be of heavy duty bearing permanently lubricated with water sealant. the seat frame shall be made out of frp (fibre reinforced plastic)/lldpe (low linear density ploy ethylene). the seats shall have handrails so that the child does not fall. it shall accommodate 4 children at a time. the powder coating shall be done on the pipes to avoid rusting. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of arch swing. leg support : 80 mm nb pipe, seat- anti skid rubber belt. bearing : heavy duty ball bearing. area : 3.0 m x 2.5 m. height : 2.5 m. top bar : 60 mm nb pipe. suspension : 6 mm rubber coated chain. the topcoat is duly powder coated. in this one child can enjoy the swing at one time. the arch shaped side frame shall be made of 80mm nb b class gi pipe shall be made up of 50mm nb b class gi pipe. the frame shall be powder coated to give an aesthetic look. the swing shall be made up of 10mm thick anti skid rubber top the rubber belt seat / u shape swing seat with 2 eye bolt tyb-s06. made of polyurethane of size 53 x 20.5 x 20 shall be suspended on 6mm rubber coated gi chairn. the bail bearings shall be mounted inside a specially designed nylon clamp. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of toddler swing.the area :- 2.8m x 1.0m . in this toddler swing the center support shall be made up of 80 mm nb b class g.i. pipe. the horizontal bars shall be made up of 50 mm nb b class g.i. pipe. all gi pipes shall be powder coated. between the two horizontal bars there shall be a heavy-duty metal clamp attached to it. the bucket seats of the toddler swing shall be made of rubber with anti skid. the ball bearings shall be mounted inside specially designed nylon balls. the rubber seat shall be affixed on 8 mm thick gi chain. the seats shall be made with full care so that the child does not fall from it while swinging. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of std. see sawhandle :-20 mm n b pipe. lever-32 mm n b pipe. colmun : 60 mm n b pipe. bearing : nylon bush press fitted. seats: frp seats with steel frame. the topcoat is duly powder coated. the level of see saw shall be made from 15, 20 and 25mm nb b class gi pipe. the seat of see saw shall be made from frp/lldpe. the stand and bush bearing made in 40mm nb b class gi pipe. see saw lever shall be welded to 5mm thickness ms plate for nut bolting with stand. all pipes flat
Tender For supply of nageswar e e -copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , flushing cistern (q3) , sinks (q3) , stainless steel shelf rack (q3) , bathroom or toilet mirror (v2) (q4) , plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest) (q3) , connection pipe with nuts (v2) (q3) , towel rail / ring for bathroom (q3) , waste pipe (q3) , soap dish - case (q4) , rotational moulded polyethylene water storage tanks (v2) conforming to is 12701 (q3) , toilet seat covers (v2) (q4) , bathroom water shower (v2) (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , pvc three layer water storage tank 1000 ltrs with cover , health faucet cp with tube 1 pt 5 mtr long , pvc pipe 110 mm bore , western toilet european pattern p trap or s trap , 15mm brass fancy tap cp bib tap , bib cock brass 15 mm , powder coating bib tap , bib cock cp brass 15 mm , hand wash basin viterous china glazed , ppr pipe 25 mm outer diameter , glass shelf 6 mm thick with cp railing of size 450 by 200 mm , ppr pipe 20 mm outer diameter , ppr gate valve 20 mm , wc orissa pattern viterous china 450 by 350 mm , hydraulic door closer , ppr gate valve 25 mm , bib cock 15 mm cp long body , pvc health faucet with tube 1 pt 5 mtr long , ppr union 15mm , toilet paper holder cp , ppr gate valve 15mm , ppr union 20 mm , plywood bwr 8 ft by 4 ft by 8 mm , 15mm brass fancy tap angle valve , urinal pot viterous flat back , door stopper aluminium , cp waste coupling 32 mm , nipple gi 15 by 100 mm , 2 way bib cock cp , 2 way angle cock cp , plywood bwr 8 ft by 4 ft by 4 mm , elbow gi 15 mm , stainless steel curtain rails 4mtr each , pvc bend 110 mm bore , door or wall hook rail set peg set 3 pin , ppr 25mm tank socket , pvc three layer water storage tank 300 ltrs with cover , ppr elbow 20 mm , tee equal gi 15 mm , helical door spring , pvc shelf 450 by 200 mm , socket gi 15 mm , aluminium sliding bolt 250 mm long , gi bend 15 mm , ppr tank socket 20 mm , union gi 20 mm , ppr socket 25 mm , ppr socket 15mm , ppr elbow 15 mm , ms butt hinges 100 mm , door or wall hook rail set peg set 6 pin , plywood bwr 8 ft by 4 ft by 6 mm , ppr tank socket 15mm , pvc connector 110 mm bore , flushing handle suitable for 10 ltrs cistern , pvc o h shower with arm , ppr union socket 50 mm , tee gi 15mm , jet spray cp 15 mm , aluminium anodised handle 100 mm , pvc bend for cistern , excel acrylic emulsion terracoda , synthetic enamel paint white colour , ppr socket 20 mm , tee gi red 20 by 20 by 15mm , m seal 100 gms , union gi 15 mm , connection pipe wired 600mm , socket gi reducer 15 by 20 mm , tee gi 20 mm , white cement , teflon tape 19mm 10mtr , elbow gi 20 mm , syphon kit for flushing cistern , nails 3 inch 75mm long , ppr pipe clamp 20 mm dia , gi union socket 25mm , pvc tee 110 mm , u clamp 20mm dia , tank socket gi 15 mm , aluminium barrel tower bolt 75 mm , ppr elbow 90 degree 50mm , glazing putty oil glazed , gi socket 50mm , ppr reducing tee 40 by 25mm , aluminium barrel tower bolt 100 mm , tank socket gi 20 mm , pvc grating round type 140 mm , pvc bend 75 mm , ppr elbow 90 degree 32mm , ppr brass l 20mm , ppr brass t 20mm , sink mixture cp , ppr t 20mm , ppr union 25 mm , ppr u clamp 20 mm dia //bid details 2 / 101
Tender For fabrication of suction, delivery bend and delivery nipple of size 250 mm dia by supplying and welding of 250 mm dia ms/gi flange along with supplying and fixing 250 mm dia foot valve, 140-r tire coupling, 16 mm dia ht nut and bolt for 2000 gpm pump
Tender For supply of for nursery maintanance - installation of green net including labour and material 75 percentage, installation of galvanized profile including labour and material , 4 meters, installationof spring including labour and material w. type, installation of screw including labour and material three-quarters 25mm, installation of 16 mm isi lateral pipe including labour and material, installation of 63 mm pvc pipe including labour and material 4 k.g isi, installation of 63 mm elbow including labour and material 4 k.g, installation of63 mm valve including labour and material, installation of 1"m.s. pipe square including labour and material, installation of 16 mm lateral cock including labour and material, installation of 16 mm elbow including labour and material, installing pole by digging pit and filling rcc, installation of galvanized wire including labour and material (16 gauge), installation of oil paint color including labour and material, installation of 63 mm t including labour and material, installation of uv film including labour and material (200 micron), repair of fogger system with labour and material 4 ply, repair root trainer stand, installation of white net including labour and material (75 percantage), installation of galvanized pipe 32 mm including labour and material thickness 2 mm, installation of galvanized pipe 40 mm including labour and material thickness 2 mm, installation of galvanized pipe 50 mm including labour and material thickness 2 mm, installation of galvanized pipe 63 mm including labour and material thickness 2 mm, installation of galvanized pipe 20 mm including labour and material thickness 2 mm, installation of nut bolt 1.5 inch including labour and material 8 m.m, installation of nut bolt 2 inch including labour and material 8 m.m, installation of nut bolt 4 inch including labour and material 8 m.m, repairs and installation of net house including labour and material, installation of pump set with labour and material 2 h.p, repairs of polyhouse gutter fiber including labour and material, repair mother bed including material and labor, installation of channeling mesh with material and labour, installation of micro sprinkler with material and labour, installing of micro tube with material and labour, installation of cycling timer set with material and labour, installation of sensor in high teck nuresery including material and labour cost, repair turpentine and installation with material and labour, repair exhoast fan and installation with material and labour (48 inch), repair cooling pad panel with labour and material (galvanized), installarion of cooling pad (4 feet * 2feet) with material and labour, installation door for greenhouse/polyhouse, installation 32 mm pvc pipe with labour & material 10 kg isi, installation 32 mm valve with material and labour, service screen filter (63mm) with material and labour, repirs air valve (32mm) with material and labour, installation foundation pipes (2mm) with material and labour, electrical work (wiring, board, price including labor and material), service one hp submersible pump with labour and material, service two hp submersible pump with material and labour