Latest bolt hex Tenders | Government bolt hex Tenders

State Government

CTN :45308598

01 Jun, 2026 NA

East Singhbhum - Jharkhand

Tender For supply of nuts and bolt of different sizes

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

State Government

CTN :45303634

30 May, 2026 NA

Ranchi - Jharkhand

Tender For e quotation for none schedule item rate - stone boulder of size 150 mm and below at quarry, supply of quarried stone 150 - 200 mm size for hand broken at quarry, boulder with minimum size of 300 mm for pitching at quarry, gravel/quarry spall at quarry, gelatin 80%, jute netting, open weave, 2.5 cm square opening for seeding and mulching, random rubble stone, sand bags (cost of sand and empty cement bag), square rubble coursed stone, stone bricks of size, (i) 250 mm x 125 mm x 100 mm, (ii) 250 mm x 125 mm x 125 mm, (i) g.i. wire (8 to 10 swg), (ii) black annealed (8 to 10 swg), binding wire, (i) annealled wire (20 to 25 gauge), (ii) black annealed (20 to 25 gauge), expanded metal (18 gauge) 40 mm x 25 mm x 75 mm wide, bituminastic board (for use as per expansion joint i.s.1838-1938 filter), (i) 25 mm thick, 150mm dia r.c.c.np2 perforated pipe, pressure release valve, (i) safety valve, (ii) pocket valve, cost of burnt clay pipe of internal dia 31.70 mm (11/4")external dia 38 mm (11/2"), (i)100 mm long, (ii)225 mm long, fuse coil, bolts 20 mm dia 25 cm long, coal tar, nuts and bolts 16 mm dia375 mm long with washer etc, palm leaves, check valve 38 mm dia., 38 mm dia. water hose 30m long, nx core bit 48 cts(imp), nx core bit 38 cts(imp), nx tc bit, bx tc bit, nx st reamer cell 6.5 cts(imp), bx st reamer cell 6.5 cts(imp), good quality wooden core box 3 metre long x 0.85 metre wide x0.15 metre deep with longitudinal compartment to accommodate 5 rows of 3 metre long cores i.e. total 15 metre

State Government

CTN :45301374

29 May, 2026 NA

Barasat - West Bengal

Tender For repairing of 1 no. of 315 kva dtr ( indoor type ) with supply of materials and testing at rabindra bhawan, barasat under north 24 parganas zilla parishad. - hv bus hing 12 kv 630a , lv bus hing 1.1 kv 630a, , 1.1kv 630a stud-bolt with fittings - brass, , 34kv 250a stud-bolt with fittings - brass, , arcing horn, , insulating materials raman make, , insulating materials senapati 0.75mm, , cotton tape 315 kva, , gasket sheet 6 mm, , ms nuts, bolts & washers, , oil seal hvside, , oil seal lyside, , silica gel breather with silica gel of 500gm, , hv coil copper dpc, , loss 5% allowed, , transformer oil (ehv grade), , labour charges, , final survey with repairing charge 315 kva, , re-assembly & boxing up of 315 kva including testing, , external painting 315 kva, , preparation & fitting of new coil - dpc (for hv cu coil), , preparation & fitting of new coil - dpc (for lv coil), , re winding of existing coil - dpc (for lv cu coil), , dismantling & re-installation of 315 kva transformer with necessary connection of terminals, earthing etc. at site, , transportation of transformer and oil barrels from site to workshop and vice versa

State Government

CTN :45289932

29 May, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

Co-operative

CTN :45305048

01 Jun, 2026 75.0 Thousand

Mehsana - Gujarat

Tender For job work jobwork with materials of 2.5"raw wtr 1 installation charges of pipe line - asbestors cement pressure pipes. , concrete pipes with and without reinforcement, , p.s.c pipes (including fittings), , method of tests for concrete pipes, , materials for m.s specials, , specifications for m.s specials for p.s.c pipes, , specifications for steel cylinders reinforced concrete pipes, , methods of tests of concrete pipes, , centrifugally cast (spun) iron pressure pipes for water gas and sewage including fittings, , specifications for centrifugally cast (spun) d.i pipes for water, gas and sewage, , d.i fittings for pipes for water, gas & sewage, , dimensional requirements of rubber gaskets for mechanical joints and push on joints for the use with c.i d.i pipes, , ci specials for mechanical and push on flexible joints for pressure pipe lines for water gas and sewage, , horizontally cast iron double flanged pipes for water, gas and sewage, , cast iron fittings for pressure pipes for water, gas and sewage, , a) rubber rings for jointing c.i pipes,, , rcc pipes & a.c pipes, , b) rubber rings for jointing psc pipes, , rubber rings for jointing ac pipes with ac couplings, , pig lead, , hemp yarn, , rubber insertion to be used in jointing c.i d.f pipes, , bolts & nuts to be used in jointing c.i d.f pipes

Central Government/Public Sector

CTN :44262460

27 May, 2026 NA

Narsinghpur - Madhya Pradesh

Tender For bid to ras corrigendum : tender for supply of special fastners for mill hp1203 fan aph at ntpc gadarwara c c -screw hex is2269-12.9 mc m30 70mm , screw hex is2269-12.9 mf m12 40mm , screw hex socket hd cap hts mc m20 50mm , screw hex cs gr8.8 m20 60mm , screw hex is2269-12.9 mc ft 24mm 50mm , screw hex is2269-12.9 mf ft 24mm 70mm , screw hex is2269-12.9 mf ft 24mm 55mm , screw hex is2269-12.9 mc ft 16mm 50mm , screw hex is2269-12.9 mc ft 12mm 80mm , screw hex is2269-12.9 mc ft 12mm 30mm , screw hex hts bs2470 mc 12mm 20mm , screw hex is2269-12.9 mc 10mm 30mm , bolt hex hts is1364-8.8 mc m16 50mm , nut hex ht is1364-3 gr8 mc m16 , nut hex hts is1364-8.8 mc m12 , nut hex hts is1364-10.9 mc m20 , bolt hex hts is1364-10.9 mc ht m20 60mm , bolt hex hts is1364 blk mc ft m20 50mm , bolt hex hts is1364-8.8 mc m16 40mm , bolt hex hts is1364-8.8 ht m12 50mm , washer a ms is6649 circ m20 , washer a ms is6649 circ m16 , washer a ms is6649 circ m12 , bolt hex hts is1364-8.8 mc m24 80mm , bolt hex hts is1364-8.8 m20 70mm

Central Government/Public Sector

CTN :45147870

28 May, 2026 NA

Medak-T - Telangana

Tender For corrigendum : supply of hy8110300545_hoist coupling bolt as per drawing number 4_rs_5174 with suitable nut and washer , hy8110300529_lt coupling bolt as per drg number 4_rs_5174 with suitable nut and washer , hy8110300510_lt coupling bolt as per drg number 4_rs_5174 with suitable nut and washer , hy8110120539_lt and ct coupling bolt of cranes as per drawing number 4_rs_5543 with suitable nuts and washers , hy8110159834_lt coupling bolt of crane as per drawing number s_888 with suitable nuts and washers , hy8110159842_hoist coupling bolt of crane as per drawing number s_2447 with suitable nuts and washers , hy8110159850_gear coupling bolt of cranes as per drawing number s_373 with suitable nuts and washers , hy8110159869_lt coupling bolt of crane as per drawing number s_2515 with suitable nuts and washers , hy8110159877_ct coupling bolt of crane as per drawing number s_2515 with suitable nuts and washers , hy8110159885_ah coupling bolt of crane as per drawing number s_1396 with suitable nuts and washers , hy8110159893_hoist coupling bolt of crane as per drawing number 4_rs_5169 with suitable nuts and washers , hy8110159249_ah coupling bolt of cranes as per drawing number 4 rs_5172 with suitable nuts and washers , hy8110159214_mh coupling bolt of cranes as per drawing number 4_rs_5172 with suitable nuts and bolts , hy8110159907_lt_a is equals to 101_ coupling bolt as per drawing number 4_rs_5170 with suitable nuts and washers , hy8110159230_ah and ct coupling bolt of cranes as per drawing number 4_rs_5170 with suitable nuts and bolts , hy8110159915_lt_a is equals to 104_coupling bolt as per drawing number 4_rs_5170 with suitable nuts and washers , hy8110159273_mh coupling bolt of cranes as per drawing number s_886 with suitable nuts and washers , hy8110050557_ct coupling bolt of cranes as per drawing number 4_rs_4878 rev_01 with suitable nuts and washers , hy8110159923_hoist coupling bolt of crane as per drawing number s_1449 with suitable nuts and washers , hy8110159931_sl number 1 coupling bolt as per drawing number s_2776_01 with suitable nuts and washers , hy8110159940_sl number 2 coupling bolt as per drawing number s_2776_01 with suitable nuts and washers , hy8110159290_lt coupling bolt of cranes as per drawing number 4 rs_6670 with suitable nuts and bolts , hy8110152074_coupling bolt and nut for half gear coupling number 101 , hy8110152082_coupling bolt and nut for half gear coupling number 102 , hy8110151736_ct coupling bolt as per drg_4_rs_5175 with suitable nuts and washers , hy8110151744_lt coupling bolt as per drg_4_rs_5177 with suitable nuts and washers , hy8110152325_ct coupling bolt as per drg_4_rs_5177 with suitable nuts and washers

Central Government / Public Sector

CTN :45302372

01 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot non ferrous scrap - brass lump scrap - 98200045(15) cond.& u/s brass lump scrap consisting of flow lamp, oxygen regulators, 63a 5 pin plug components, spcc panel components, catenary ending cones, catenary splices, bushes, bolts, nuts, gas cutting torches, gm valves, float valves, tap bib cock, cp angle valves, dropper clips, contact wire swivel clips, marut hand compression sprayer, brush holders, terminal connectors, pg clamps, bracket direct clamps, steel wire ending cones, briddle wire dopper clips, rods, key spindle, nozzle type, dv components, trunnion body for bmbc, etc. available in the bin with or without other attachments. total gross weight: 865.6 kgs. said to contain total brass content: 845.501 kgs approx., total ms content: 5.65 kgs approx, total aluminium content: 5.194 kgs approx, total stainless-steel content: 3.14 kgs approx, and plastic, rubber, etc: 6.115 kgs approx. hsn code:74040022; gst@18% on forward charge basis. note: 1) delivery on actual weighment basis only 2) segregation not permitted. 3) purchasers/firms are requested to physically inspect the lot before offering their bids. 4) post auction no representation shall be entertained.5) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 6) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. 7) railways does not guarantee for quality, quantity description etc. location: non-ferrous ward bin no: 1.

State Government

CTN :45301085

26 May, 2026 NA

Chandrapur - Maharashtra

Tender For procurement of boiler ss sacrificial shields, boiler fins and allied spares for u#3 coh at cstps, chandrapur. - locking clit for staright shield, ss shileding 90 deg for supply tube dia, ss shilding for sh screen tube dia 44.5, ss shielding 76.1 x 3.5 x 1000 l with 2, blr ww 0 0 clit for 90 deg ss shield, blr tbatta 0 0 51 mm for shield, 44.5 mm dia x 3 mm thick s- bend, blr tbatta 0 0 ltsh coil, motor pinion t-30, blr ww 0 0 flat for fin 6x12 m.s, blr sbww 0 0 stud with two nuts, flat ms rectangular 80 x 6 mm, ww trapezoidal bar 30x10x20 in 200 mm l, wear bar moc sa 210 gra1 12x12 mm, tube slotted fin 200 x 20 x 6 mm

Bolt Hex Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors