Latest bolt kit Tenders | Government bolt kit Tenders

Central Government/Public Sector

CTN :41309404

22 Aug, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of hexagon head screw size:-m12x50, iso-4014,grade-10.9 ,is-1364(part-1) note:- 1.zinc electroplated to grade a3l of annexure-e of is-1367(part-eleven) 2.bolt & screw shall be tvs or unbrako only. drg no- train18/mc/ac-0-0-003, item no-22 [ warranty period: 30 months afte r the date of delivery ]

Central Government/Public Sector

CTN :41288615

22 Aug, 2025 NA

Mumbai - Maharashtra

Tender For supply of six thousand hourly routine kit spares for diesel alternator e e - plug injector orifice , plug ball , gasket sea water pump , washer lock , washer plain , plug pipe , washer , draincock , ball check , screen filter , valve shutoff , seal water pump , seal rectangular ring , gasket governor housing , bearing ball , seal tamper proof seal wire , hub jaw coupling , shaft fuel pump drive , disc actuator , tee female pipe , screw hexagon head cap , nipple plain pipe , fitting grease , sleeve wear , bearing roller , knob for shut off valve hs , key plain woodruff , gasket water , bushing , nut lock , shaft idler , screw captive washer cap , seal keyway , seal o ring , elbow male union pt pump elbow male union , clamp v band , clamp t bolt , clamp tee bolt , cap dust , kit, 4l turbo repair , screw socket head cap , disc valve , pack idle spring , actuator etr fuel control , housing filter , plug threaded , hose plain , connector male , belt v , gasket flange , cap filter pt fuel pump ) /bid number : gem/2025/b/6469346 * /dated: 01-08-2025 & & / bid document 1 / 43

Central Government And Public Sector

CTN :41309637

13 Aug, 2025 NA

Raipur - Chhattisgarh

Tender For supply of hexagon head bolt m12x25mm. specification/drg.no. is:1364(part-1)2002, grade:8.8 or abo ve finish- parkerised , make: unbraco/ tvs or eqvt. [ warranty period: 30 months after the date of deliver y ]

CTN :41290921

11 Aug, 2025 NA

Delhi - Delhi

Tender For supply of 52 lines of dg set spares e e - ring set piston , gasket exhaust pipe , water pump drive belt , alternator drive belt , hose clip , oil filter , spiral spring oil ring , con rod bearing , seal for sump , washer injector , clamp , seal ring , gasket , fuel pipe solenoid valve , stud , air cleaner , fuel pipe , hose , hollow stud , hollow screw , fuel filter cartridge , hose inter cooler , push rod , cylinder head gasket , shim for thermostat , joint turbo , joint , oil inlet pipe , exhaust manifold gasket , gasket oil cooler , return pipe , circlip piston pin , oil return pipe , oil section pipe gasket , connecting rod pipe , thermostat , socket ring , hexagon bolt , conical ring , screw , hexagon nut

CTN :41259998

09 Aug, 2025 NA

North Sikkim - Sikkim

Tender For supply of nozzle , arm wiper , assy lined shoe front , assy linded shoe rear , bolt centre , u bolt , kit minor cylinder clutch master , lamp combination lh , lamp combination rh , wheel cylinder kit , wheel brg frt outer , wheel brg rear inner , oil seal front hub , switch stop lamp , cable rear park brake , cable speedometer

Central Government/Public Sector

CTN :40228839

01 Aug, 2025 NA

Haridwar - Uttarakhand

Tender For bid to ras tender for supply of fastners - drg- 210004537 rev-00 hexagon socket head cap screw , m4x20 as per is 2269/iso 4762 , material-steel 8.8 finish- phosphatising , stud , m12x30 , type-b as per is-1862 , material - steel property class 8.8 as per is 1367(part-3) , finish- zinconickel , hexagon head screw , m12x80 as per is 1364(part-2) , material- steel property class 8.8 as per is 1367(part-3) , finish- zinco- nickel , stud , m12x35 , type-b as per is-1862 , material - steel property class 8.8 as per is 1367(part-3) , finish- zinconickel , hexagon head screw , m10x30 as per is 1364(2) , material -aisi 304 , finish -passivated size- pn-218603926 , hexagon head screw full threaded m12x45 as per is-1364 (part-2)/iso- 4017/din-933 / uni 5739 , material property class-8.8 , finish-zinco-nickel , dimension , tolerance and other technical details as per governing standard , hexagon head screw , m8x30 as per is 1364(2) , material-8.8 as per is 1367(3) , finish-zinco-nickel n.std-is-1364 , hexagon head screw full threaded m12x25 as peris-1364 (part-2)/iso- 4017/din-933 / uni 5739 , material property class-8.8 , finish-zinco-nickel , dimension , tolerance and other technical details as per governing standard , hexagon head screw full threaded m3x10 as per is-1364 (part-2)/iso- 4017/din-933 / uni 5739 , material property class-8.8 , finish-zinco-nickel , dimension , tolerance and other technical details as per governing standard , hexagon socket head cap screw , m6x20 as per is-2269 or equivalent standard iso-4762/ din-912/uni-5931 , material property class- 8.8 as per is 1367(3) , finish-zinconickel , dimension , tolerance and other technical details per governing standard , hexagon head screw , m6x30 as per is 1364(part-2) , material -aisi 304 , finish-passivated , socket head cap screw , m6x25 as per is 2269 , material- 10.9 , finish-zinc-nickel. , hexagon head bolt , m8x60 as per is 1364(1) , material - 8.8 as per is 1367(3) , finish - zinco nickel. n.std-is-1364 , stud m6x28 as per is- 1862 type -b/ uni-5911 (tap/metal end -1.5d) , material- steel property class 8.8 as per is-1367(part-3) , coating- zinco-nickel , dimensions , tolerances and general requirements as per governing standard , stud m6x20 as per is- 1862 type -b/ uni-5911 (tap/metal end -1.5d) , material- steel property class 8.8 as per is-1367(part-3) , coating- zinco-nickel , dimensions , tolerances and general requirements as per governing standard , hexagon head screw full threaded m8x45 as peris-1364 (part-2)/iso- 4017/din-933 / uni 5739 , material property class-8.8 , finish-zinco-nickel , dimension , tolerance and other technical details as per governing standard , hexagon head screw , m5x16 as per is 1364(2) , material-8.8 as per is 1367(3) finish-zinco-nickel , hexagon head screw , m5x25 as per is 1364(part-2) , material - stell property class 8.8 as per is 1367(part-3) , finish -zinco-nickel n.std-is-1364 , hexagon head screw , m5x16 as per is 1364(part-2) , material - stell property class 8.8 as per is 1367(part-3) , finish -zinco-nickel n.std-is-1364 , stud m5(x0.8)x20 as per is- 1862 type-b(tap end-1.5d) mat-steel property class8.8 as is-1367(part-3) , coating- zinco-nickel , dimension , tolerances and general requirements as per governing standard , socket head cap screw , m12x30 as per is 2269 (or equivalent standard- din 912/iso 4762/ uni 5931) , material- steel property class-8.8 as per is- 1367(3) , finish-zinc-nickel , dimensions , tolerances and general reqmt. as per governing standard. , cheese head screw m5x16 is-1366-8.8 (electroplating as per iso 40412-b2g) n.std-is-1366 , hexagon head screw , m 16x35 as per is 1364(part-2) , material - steel property class 8.8 as per is 1367(part-3) , finish - zinco- nickel , drg- pn-210003403 rev-00 hexagon head bolt , m10x50 as per is 1364(part-1) , material - steel property class 8.8 as per is 1367(part-3) , finish - zinco- nickel , drg- p/n 210071442 rev-00 counter sunk screw m5x12 is-1 365 , materia

Central Government/Public Sector

CTN :41265167

14 Aug, 2025 NA

Ahmedabad - Gujarat

Tender For supply of hexagon head bolt with thread m 20

Central Government/Public Sector

CTN :41267174

11 Aug, 2025 NA

Dahod - Gujarat

Tender For supply of m.s.black hexagon head bolt with thread m 12

CTN :41280198

20 Aug, 2025 NA

Kolkata - West Bengal

Tender For supply of hexagon socket head cap bolt (partial thread bolt) of size m12x50mm of generally conformi ng to is 2269, din 912, iso 4762, property class 12.9 as per is 1367, iso 898 part 1. n.b:-the length of th e shank(unthreaded)of the bolt should be 10mm and the length of the thread of the bolt should be 40mm. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41251843

21 Aug, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of lock bolt kit for plate assembly to dlw part no. 17660403 consisting of 02 items (1) lock bolt 1-3/8 inch to dlw part no. 17420040 qty/set - 1 2 nos. & (2) collar to dlw part no.17084301 qty/set -12 nos. (sl.no. 1 & 2 = 1 set). [ warranty period: 30 months after the date of delivery ]

Bolt Kit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector