Latest bolt nut scrap Tenders | Government bolt nut scrap Tenders

Central Government/Public Sector

CTN :41295943

18 Aug, 2025 NA

Yamunanagar - Haryana

Tender For supply of hex. head bolt with nut (m20x190n), split pin 4x36 & spring washer b20. for bogie bols ter suspension arrangement. drawing no:- aw 05100 , alt.(g), items-20,22 & 23 [ warranty period: 30 months after the date of delivery ]

Corporations And Associations And Others

CTN :41289329

13 Aug, 2025 88.02 Lacs

Delhi - Delhi

Tender For supply and installation of children play equipments under mplads funds of parliamentary constituency new delhi, south delhi and chandni chowk for various locations of parks in municipal corporationof delhi - supply & installation of children play equipments under mplads funds of parliamentary constituency new delhi, south delhi & chandni chowk for various locations of parks in municipal corporationof delhi, supply and fixing of four seated merry go round. area: 1.5 m. height 0.8 m. seat moulded f.r.p. main frame: 40 nb g.i. pipe. bearing : heavy duty bearing. ms plate: 250x10mm. support pipe- 80nb. the topcoat is duly powder coated. the item shall be having its main frame made up of 25 & 40. mm nb b class g.i. pipe. the stand shall be made in 80 mm nb b class g.i. pipe. the whole structure shall be mounted on heavy duty bearing shaft. the bearing used shall be of heavy duty bearing permanently lubricated with water sealant. the seat frame shall be made out of frp (fibre reinforced plastic)/lldpe (low linear density ploy ethylene). the seats shall have handrails so that the child does not fall. it shall accommodate 4 children at a time. the powder coating shall be done on the pipes to avoid rusting. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of arch swing. leg support : 80 mm nb pipe, seat- anti skid rubber belt. bearing : heavy duty ball bearing. area : 3.0 m x 2.5 m. height : 2.5 m. top bar : 60 mm nb pipe. suspension : 6 mm rubber coated chain. the topcoat is duly powder coated. in this one child can enjoy the swing at one time. the arch shaped side frame shall be made of 80mm nb b class gi pipe shall be made up of 50mm nb b class gi pipe. the frame shall be powder coated to give an aesthetic look. the swing shall be made up of 10mm thick anti skid rubber top the rubber belt seat / u shape swing seat with 2 eye bolt tyb-s06. made of polyurethane of size 53 x 20.5 x 20 shall be suspended on 6mm rubber coated gi chairn. the bail bearings shall be mounted inside a specially designed nylon clamp. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of toddler swing.the area :- 2.8m x 1.0m . in this toddler swing the center support shall be made up of 80 mm nb b class g.i. pipe. the horizontal bars shall be made up of 50 mm nb b class g.i. pipe. all gi pipes shall be powder coated. between the two horizontal bars there shall be a heavy-duty metal clamp attached to it. the bucket seats of the toddler swing shall be made of rubber with anti skid. the ball bearings shall be mounted inside specially designed nylon balls. the rubber seat shall be affixed on 8 mm thick gi chain. the seats shall be made with full care so that the child does not fall from it while swinging. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of std. see sawhandle :-20 mm n b pipe. lever-32 mm n b pipe. colmun : 60 mm n b pipe. bearing : nylon bush press fitted. seats: frp seats with steel frame. the topcoat is duly powder coated. the level of see saw shall be made from 15, 20 and 25mm nb b class gi pipe. the seat of see saw shall be made from frp/lldpe. the stand and bush bearing made in 40mm nb b class gi pipe. see saw lever shall be welded to 5mm thickness ms plate for nut bolting with stand. all pipes flat

CTN :41306280

12 Aug, 2025 NA

Rajauri - Jammu And Kashmir

Tender For supply of 408 01 0081 lube oil filter , sen0000029 fuel filter , sen0000030 water separator , 336 10 0044 primary air filter , 336 10 0045 safety air filter , sen0000006 fuel filter stratapore , 251 00 0004 bogie leaf spring assembly , 115 01 0018 ball joint rhs , 115 10 0002 ball joint assy rhs , 293 01 0012 clutch cover 380 dia , 292 02 0006 clutch disc 380 dia , 277 00 0009b u bolt bogie suspension , 277 00 0028 inverted u bolt , cm 00 16783 hex nut m29x3

CTN :41273530

21 Aug, 2025 NA

Khammam-T - Telangana

Tender For supply of phosphorous bronze bushes for hinge pin as per enclosed drg no hwpm mu 27 rev 02 , suspension bolt and pin set each set consists of 5 items as per enclosed drg no hwpm mu 19 rev 01

CTN :41296112

06 Aug, 2025 NA

Gorakhpur - Haryana

Tender For supply, installation, testing & commissioning of as below- (a) mild steel angle clamp nut bolt size more than 10 inch nut type flex nut and connecting it to above overhead pole. - 280 kg (b) stay along with stay rod, stay bow, stay plate and thimble with alluminium cables for tighting and balancing of hole an d connecting the ground with it. - 05 nos (c) proclaim pin insulator of drawing no. rr/pn/11/07 highest volt age working capacity 11 kv creepage distance 230 mm visible discharge voltage (kv) 9 mechanical falling l oad (kn) 5 - 25 nos (d) brass made shackle insulator for overhead fencing voltage 12 v 50 hz - 25 nos (e) maintenance free earthing electrode 4 mtr. long made up of copper material outer dia 40 mm is 3043 and making of earth pit size 60x60 cm and connecting it well g.i. wire 6 swgi - 05 nos . (f) suspension of wires connecting it with clamps insulator and jointing the cables and dismantaling of overhead and transporting i t to consignee - 480 mtr. [ warranty period: 30 months after the date of delivery ]

CTN :41275192

11 Aug, 2025 NA

Poonch - Jammu And Kashmir

Tender For supply of release bearing assy e e - release bearing assembly , cover assembly 1 75 inch spine dia , assembly self starter , suspension clamp , drop link assembly , fuel filter , fuel filter cartridge , bearing tapper roller outer , bush rubber , hatch lock with bolt , needle bearing

corporations/Associations/Others

CTN :41285512

21 Aug, 2025 NA

Hubli - Karnataka

Tender For auction sale of aluminium scrap,scrapped countable materials consisting of 5 types (e-waste),scrapped countable materials consisting of 6 types,scrap weighable materials consisting of following 2 items,scrapped glasses any size with or without broken,complete scrap rexine including half burnt rexine,scrapped piston- a,m.s scrap,scrapped plywood pieces,scrapped countable items consisting of 5 items,scrapped countable items consisting of 6 items,scrapped cast iron powder,scrapped countable items consisting of 2 types,engine dismentling scrap items consistng of bolt nut,scrapped densified plywood,scrapped aluminium flooring,scrapped sintex with or without cut,scrapped countable items consisting of 8 types,etm core plastic roll,scrapped countable items consisting of 8 types.,scrapped countable items consisting of 9 types.,scrapped countable items consisting of 5 types.,scrapped auto countable items consisting of 2 types.,scrapped card board box

State Government

CTN :41276701

11 Aug, 2025 9.79 Lacs

Birsinghpur - Madhya Pradesh

Tender For procurement of critical spares of esp 2x210 mw abb abl make boilers of unit no. 1 and 2 at sgtps, mppgcl, birsinghpur - particulars as per tender schedule, suspension tube with suitable bolt nut and washer (i.e.cap screw, guide sleeve,hex pipe nut), pressure sleeve, upper tie rod, lower tie rod, derm lifting mechanism complete assembly, cam and guide follower for derm, .

CTN :41208893

05 Aug, 2025 50.0 Thousand

Darjeeling - West Bengal

Tender For supply of clutch plate - brake master cylinder , armature self 2.5 ton , field coil 2.5 ton tata , bush bearing self , carbine plate , element fuel filter lsv , combination switch , u bolt lsv , door channel lh and rh stln , door opening clutch inner , door pad stln , clutch cyl kit stln , gear lever kit stln , hub lock nut 2.5 ton tata , sleeve cyl kit 2.5 ton tata , clutch cyl kit 2.5 ton tata , door handle 2.5 ton tata , suspension kit mg , knuckle bearing mg , engine mounting pad

Corporations And Associations And Others

CTN :41255186

07 Aug, 2025 6.45 Lacs

Delhi - Delhi

Tender For providing and installation of children play equipments in municipal park near h.no.ru-335, ru block pitampura, ward no.57 under keshavpuram zone - providing and installation of children play equipments in municipal park near h.no.ru-335, ru block pitampura, ward no.57 under keshavpuram zone, supply and fixing of double arch swing.leg support :80 mm nb pipe. seat- anti skid rubber belt. bearing : heavy duty ball bearing. area : 6.0 m x 1.5 m. height : 2.6 m. top bar :50 mm nb pipe. suspension: 6 mm rubber coated chain. in this one child can enjoy the swing at one time. the arch shaped side frame shall be made of 80mm nb b class gi pipe shall be made up of 50mm nb b class gi pipe. the frame shall be powder coated to give an aesthetic look. the swing shall be made up of 10mm thick anti skid rubber top the rubber belt seat/ u shape swing seat with 2 eye bolt tyb-s06. made of polyurethane of size 53 x 20.5 x 20 shall be suspended on 6mm rubber coated gi chair. the bail bearings shall be mounted inside a specially designed nylon clamp. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of toddler swing.the area :- 2.8m x 1.0m . in this toddler swing the center support shall be made up of 80 mm nb b class g.i. pipe. the horizontal bars shall be made up of 50 mm nb b class g.i. pipe. all gi pipes shall be powder coated. between the two horizontal bars there shall be a heavy-duty metal clamp attached to it. the bucket seats of the toddler swing shall be made of rubber with anti skid. the ball bearings shall be mounted inside specially designed nylon balls. the rubber seat shall be affixed on 8 mm thick gi chain. the seats shall be made with full care so that the child does not fall from it while swinging. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of spiral slide. ladder-frame- 25m m n b pipe. handrail - 20 mm n b pipe. centre support- 50 mm n b pipe. area : 2.5 m x3.5 m. platform height : 2.1 m. chute f r p the topcoat is done using the best quality brand or duly powder coated. spiral slide shall be chute made of frp (fiber reinforced plastic / lldpe (low linear density poly ethyline) having thickness of 4mm slide center support shall be 80mm nb b lass gi pipe. landing module shall be supported by 20mm nb b class gi pipe. slide extension platform shall be made from frp / lldpe. the railing shall be made from 15mm nb and 20nn nb b class gi pipe. all pipes shall be coated with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of std. see sawhandle :-20 mm n b pipe. lever-32 mm n b pipe. colmun : 60 mm n b pipe. bearing : nylon bush press fitted. seats: frp seats with steel frame. the topcoat is duly powder coated. the level of see saw shall be made from 15, 20 and 25mm nb b class gi pipe. the seat of see saw shall be made from frp/lldpe. the stand and bush bearing made in 40mm nb b class gi pipe. see saw lever shall be welded to 5mm thickness ms plate for nut bolting with stand. all pipes flat shall be powder coated to avoid rusting. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size)c37c40c41c39 (as per direction of officer

Bolt Nut Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Corporations And Associations And Others

corporations/Associations/Others

State Government

Corporations And Associations And Others