Latest bond wire Tenders | Government bond wire Tenders

Central Government/Public Sector

CTN :45550977

07 Jul, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of service connector (2 conductor through terminal block suitable for din rail) of 16 sq.mm cross section for connecting light fittings as per item no. 283-901 of wago, make-wago, weidmuller, phoenix connect well or equivalent. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45555774

22 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply, termination installation, testing and commissioning of ventilation system on roof of paint shop of lower parel workshop along with complete installation, frame work of suitable size with ms 50mmx 50 mmx 5mm, cabling, cable try work, wiring and protection system with 4 pole 20a mcb for each and mcb board along with 2.5 sqmm cable 4 core and 10 sqmm cable from panel to distribution board for main supply and power full exhaust system of length and height minimum 1 meter with width minimum 400 mm, diameter blades 900 mm, blades rotational speed -620 r/min or more. air flow 30,000 m?/h, noise level shall be less than 70 db, power shall be minimum 750 watt with the flap system and motor starter of 1 hp or as per suitable and confirming to s/iec 60947-4-1 or latest. all electrical works shall be carried out in accordance with the provision of indian electricity act 2003 and indian electricity rules 1956 amended to date and all the safety codes and procedures outlined in the safety codes shall be complied with general and safety requirement shall be governed by is 13947 (pt i) 1993 and is:8623/1993, amended to date. termination of all cables shall be done with bimetallic terminal connector suitable for 2.5 dia aluminium tubular busbar for 20a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 2.5 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 2.5. type test certificate from nabl or any other govt agency lab report shall be attached along with the offer without which offer will be rejected. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45525442

16 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For terminal connector for hvn bushing as per drg no 34590050657 rev 01

Central Government / Public Sector

CTN :45556416

30 Jun, 2026 NA

Parbhani - Maharashtra

Tender For supply of 25 kv 1250 amps single pole isolator as per rdso spec. ti spc psi isoltr 0210 with a and c slip no. 1 and 2 with arcing horns, operating rods, operating rod guides, mounting base, insulators (pin &pedestal insulator set and rod insulator), terminal connector ri 1009, pad lock & aluminium strip but without earth contact assembly with complete set including all sps and accessories. [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45560989

15 Jul, 2026 NA

Hyderabad-T - Telangana

Tender For supply of 16 sq.mm feed through spring clamp terminal connector suitable for used in conductor cross section 16 sq.mm. as per following details:- i) rated voltage:- 800 v ac ii) rated current:- 76a iii) housing material:- polyamide. iv) product function:- feed through. v) wireentry orientation:- top entry. vi) mounting type:- din rail. vii) operated by:- screw driver. viii) rated surge voltage:- 8kv ac similar to connectwell make model no. csc16t. [ warranty period: 30 months after the date of delivery ] ]

CTN :45557355

26 Jun, 2026 NA

Udhampur - Jammu And Kashmir

Tender For supply of bty lead for flt , ignition switch , bty lead , terminal connector 2 way , 4st relay 12v

CTN :45506168

01 Jul, 2026 2.26 Crore

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of temperature sensor-transmiter tt 001 hbs-5-4425-1 , temperature sensor/transmiter tt 001& 2 hbs-5-4425-2 , temperature sensor tt 002 hbs w/o no 64032 , temperature transmiter tt 002 hbs w-o no 64032 , carbon brushes 59 kw , bearing set 59 kw nu215 &nup215 , isolator switch 3 pole 25a , programmble controller , heating element , motor 22kw1138 , humidistat1163 , main switch ot80f31226 , ovrld gv3l501234 , pressure switch1980 , differential pressure switch adps03 50-500 pa , differential pressure switch adps05 200-1000 pa , differential pressure switch adps07 1000-4000 pa , actuator gga326.1 e-ha 230v , ac-dc converter 24v 5a , main switch ot63f3 , main switch ot100f3 , main switch ot125f3 , overload relay gv2-p16 9-14 a , overload relay gv2-rt08- 2.5-4 a , terminal connector 2 , 5 mm2 , terminal connector 4 mm2 , terminal connector 6 mm2 , terminal connector 10 mm2 , terminal connector 16 mm2 , terminal connector 25 mm2 , hmi display 7inch x2 pro new type , hmi cable cab 103-3m , plc module fx3u-485-adp-mb rs485 , actuator , pressure meter for citadel , compressor-motor flexible coupling insert 61-0920 , compressor rt450al-oil filter replacement kit 61-9916 , gasket copper-1-4inch flare , fan belt , dust filter , nbc cart stanag 44471157 , filter1414 , filter1424 , filter1430 , filter1436 , filter1442 , filter1448 , fan bearing , impeller1042 , filter2188 , filter2189 , filter2192 , filter2194 , motor bearings drive end type 6309 , motor bearings non drive end type 6204 , motor bearings non drive end type 6208 , motor bearings non drive end type 6210 , motor bearing plummer block 0048 , motor bearings - block blns0050 , motor bearings - block blns0030 , 2 stage combi g4 pre filter and f9 fine filter 600 m-3h , 2 stage combi g4 pre filter and f9 fine filter 900 m-3h , 2 stage combi g4 pre filter and f9 fine filter 1800 m-3h , 2 stage combi g4 pre filter and f9 fine filter 2700 m-3h , 2 stage combi g4 pre filter and f9 fine filter 3600 m-3h , flexible hose 50mm nb , flexible hose 65mm nb , flexible hose 100mm nb , flexible hose 25mm nb , flexible hose 32mm nb , flexible hose 25mm nb , flexible hose 32mm nb , thermostatic expansion valve body , replacement motor , replacement motor , compressor tool kit xjf 95s , gas charging hose , tempreture humidity meter

Central Government/Public Sector

CTN :45528409

03 Jul, 2026 4.06 Lacs

Bangalore - Karnataka

Tender For supply of coin battery holder horizontal mount type for cr2032 , connector header through hole 4 position 0.098" (2.50mm) , switch tactile spst-no 0.05a 12v , connector, 'd' type plug 9 pin straight moun't termination 1, 27um gold plated contacts , brushless fan, 12v, dc, 38x38x10 mm, 9000 rpm, 6.3 cfm, 2 ball bearing, 2 leads , mounting accessories crimp 2 contac? housing insulator 3.96mm pitch , chrimp terminal female contact 30 to 26 awg , connector, socket, crimp housing, 3 position 2.5mm pitch single row , connector, header, single row, straight, 20 contact, 2.54mm pitch, 0.75 m gold plated

Central Government/Public Sector

CTN :45407265

15 Jun, 2026 NA

Kokrajhar - Assam

Tender For corrigendum : supply of 400 kv terminal connector

Central Government/Public Sector

CTN :45551224

03 Jul, 2026 NA

Villupuram - Tamil Nadu

Tender For dn/mas acting for and on behalf of the president of india invites e-tenders against tender no m-sg-2026-515-ms_vm-2 closing date/time 03/07/2026 15:00 hrs. bidders will be able to submit their original/revised bidsupto closing date and time only. manual o ers are not allowed against this tender, and any such manual o er receivedshall be ignored.1. nit headername of worksignalling and telecom portion of work in connection withengineering works in chennai beach(msb)-villupuram(vm)section overchennai division.(msb-vm-2026-2)bidding typenormal tendertender typeopenbidding systemsingle packet systemtender closing datetime03/07/2026 15:00date time of uploadingtender09/06/2026 16:19pre-bid conferencerequirednopre-bid conference datetimenot applicableadvertised value 14550242.18tendering section signalbidding style[ decision at schedulelevel ]bidding unitearnest money (rs.) 291000.00validity of offer ( days) 60tender doc. cost (rs.)0.00period of completion 12 monthscontract type works - general contract category expenditurebidding start date 19/06/2026are jv allowed to bid nonumber of jv memberallowed0are consortium allowedto bidnonumber of consortiummember allowed0ranking order for bidslowest to highest expenditure typecapital (works)2. schedules.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () a-sor 2022 items9145422.44above/below/par1please see item breakup for details. 9145422.44 at par9145422.44description:- sor 2022 itemss.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () b-non sor items5404819.7411 3900.00numbers 100.00 390000.00 at par 390000.00 rs.description:- provision of 7.2 mm holes in old/new rails to provide continuity bonding /polaritybonding etc (all other material required for the work shall be supplied by contractor) (this scheduleincludes the xing of bond wire in the 7.2 mm hole). the bond wire and channel bond pins will besupplied by railways)22606.00numbers 670.00 406020.00 at par 406020.00 rs.description:- releasing and re xing of tld boxes in dc track circuits. (this work includes releasingthe existing track connections and reconnecting the track connections after the completion of workalong with provision of necessary holes for connecting lead wires and painting of track particulars.all the materials required for the above work shall be supplied by the contractor as per the directionof the rly engineer at site.3360.00numbers7400.00 444000.00 at par 444000.00 rs.description:- re xing of released point m/c (all types) and its gound connections (existing pointmachine) including wiring and termination in point m/c and interconnections between point m/c andct box through pvc hose pipe and painting (all types of insulations connected to point work , alltypes of bolts and nuts, washer springs/ at , pvc hose pipe, 3/0.75 sq.mm copper wire,7/1.4 sq.mmcopper wire, paints and other miscellaneous items shall be supplied by the contractor). the workshall be carried out as per the instruction of engineer at site.4110.00numbers3600.00 396000.00 at par 396000.00 rs.page 1 of 16run date/time: 09/06/2026 16:19:30chennai division-s and t/southern rlytender documenttender no: m-sg-2026-515-ms_vm-2closing date/time: 03/07/2026 15:004description:- releasing and re xing of cable termination box for point machine (existing pt ctbox)- this work involves breaking of concrete andreleasing the existing cabletermination box andkeep it a side casting of foundation and erection of the released ctbox and carrying out the interconnection between point machine and ct box. the work shall be carried out as per the instrution ofengineer at site.55141.00numbers3771.78 531820.98 at par 531820.98 rs.description:- all type point machine ground connections to be released carefully withoutdamaging, kept aside and re- x the same after completion of engineering work. the work shall becarried out as per the instruction of engineer at site.66 8000.00numbers 5.70 45600.00 at par 45

Bond Wire Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors