Latest boom scrap Tenders | Government boom scrap Tenders

Central Government/Public Sector

CTN :40122517

06 May, 2025 NA

Saharanpur - Uttar Pradesh

Tender For supply of track guide for bwtb type wagon as per rdso drg.no. wd-00009-s-73, item no.2, specification and mat. spec as per d rg. [ warranty period: 30 months after the date of delivery ]

CTN :39506280

28 Apr, 2025 4.26 Lacs

Kanpur - Uttar Pradesh

Tender For corrigendum : "description of work: - work of shifting the obstructing electric poles in 11 kv line in the widening of bhairampur chandrahanspur dhahiya, panchapurwa, ramaipur, kaindha road from km-12 of bidhanu kisan nagar canal track road related to 33/11 kv electricity substation chakarpur under electricity distribution section-kanpur rural under full deposit scheme item and shifting of obstructing electric poles in the widening and strengthening work from km-12 to 16 of bhaunti-kala ka purwa-damgarha-patarsa-gopalpur kaindha road (a.d.m.) located in the area related to chakarpur. (on semi turnkey basis).

CTN :40098338

15 May, 2025 NA

Kalpakkam - Tamil Nadu

Tender For supply of spares for ashok leyland vehicles - item 1-water pump assy 7 holes mounting bs4 bft05501 , item 2-egr hose bs4 b2g01416 , item 3-egr cooler bs4 fes00142 , item 4-egr gasket bs4 f7y01800 , item 5-egr valve bs4 fl402500 , item 6-turbo charger gasket fj606600 , item 7-turbo charger stud f3786215 , item 8- turbo charger nut f7f00115 , item 9-rear wheel hub outer oil seal fa602400 , item 10-fuel strainer f8824500 , item 11-fuel water seperator f8835100 , item 12-exhaust manifold gasket x1700111 , item 13-7 , 10 holes brake lining set std size p5105324 , item 14-7 , 10 holes brake lining set 1st over size p5105325 , item 15-alternator assy f1n01400 , item 16-self starter assy fzt03900 , item 17- 3.5 length engine rear bed mounting bolt 24 size spanner l1021622 , item 18-power steering filter pd600391 , item 19-air tank drain nut m302830 or p1006842 , item 20-track rod end assy lh p2410639 , item 21-drag link end rh p2410739 , item 22-tie rod end lh p2409539 , item 23-tie rod end rh p2409639 , item 24-wheel o ring f2725800 bid number/ & ( * ) : gem/2025/b/6157192 dated/ + : 23-04-2025 bid document/ 3 3 1 / 21

CTN :39873797

24 Apr, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For bid to ras bid to ras repair and overhauling service - upgradation of gym interior of officers gym; interior design; yes; buyer premises: augmentation of interior designing for officers' gymanisum -ins vishw rma-1 false ceiling-providing and fixing suspended false ceiling of armstrong or equivalent (fine fissured micro look with silhouette grid) equivalent of size 600mm x 600mm at all levels fixed with channels & hanger rods & making cut outs for all led lights etc including all material, labour and transportation as per approved sample designs, drawings and specifications as directed by the officer in-charge. item includes dismantling of old ceiling and disposal of the malba. providing ducting after making necessary connections from the main duct . the work has to be executed in co-ordination with the air conditioning system agency and with the officers monitoring the ac system 2) wooden ceiling providing of faux beams in the ceiling as part of the design of the false ceiling. beam size shall be 8" x 8" as per texture and colour finalized . the installation has to be carried out maintaining the aesthetics of the area and as per design finalized including all material, labour, transportation as per approved sample designs, drawings and specifications as directed by the buyer 3) electrical wiring : providing & fixing of 25mm electrical conduits of make akg/polypack/setia or equivalent making chasing in walls & finishing it with plaster making it good for painting & pvc insulated copper wires of finolex/havells or equivalent as per approved samples, design, drawings, specifications & as directed by the buyer, item includes removal of the old wiring and disposal of the malba 4) light fixtures downlighters : providing & installation of led downlighters of 5000k of reputed brand jaguar/philips/legero/syska as per approved samples, design, drawings, specification and as directed by the buyer with testing and commissioning. item includes dismantling of old lights and buy back of old lights with fittings and disposal of all malba 5) track lights & spot lights spot lights : providing & installation of 9w cob lights of reputed brand jaguar/philips/legero/syska as per approved samples, design, drawings, specifications and as directed by the buyer 6) magnetic track lights : providing of suspended magnectic tracks of reputed brand philips/jaguar/ legero/syska or equivalent including 200w integrated power supply, trimless wall corner l jointer for magnetic track channel and hanging kit set. providing of 20w linear laser tiltable spotlight with a combination of cone pendant light as per approved samples, design, drawings, specifications and as directed by the buyer 7) switches/sockets & switch boards providing of switches sockets and all the switch boards of reputed brand i.e. schneider/norisys as per approved samples, design, specifications and as directed by the buyer 8) ceiling and wall painting cleaning and sanding of the surface of the ceiling and wall and application of 1st coat of oil base primer. upon drying of primer, application of 2 coats of birla wall putty. upon drying, sanding the surface to a smooth seamless finish and application of 2nd coat of oil base primer. upon dring of the primer application of 3 coats of emulsion of royale teflon finish as per approved samples, specifications and as directed by the buyer 9) wall panelling providing and fixing in position wall panelling at all heights with pvc wall panel/sheets (5-9mm thickness) of approved texture, design and patterns having nrc (noise reduction co-efficient) of 0.50 (minimum), light reflectance of 85% (minimum). non combustible fire performance as per bs:476 , humidity resistance of 100% , thermal conductivity <0.043 w/m k comprising of frame made in the wall from specially fabricated galvanized mild sheet 0.50mmthk pressed section (galvanizing @120grams per sqm including both sides) i.e. vertical studs of size 48 x 34 x 36 fixe

Central Government/Public Sector

CTN :39985963

24 Apr, 2025 96.01 Lacs

Narsinghpur - Madhya Pradesh

Tender For corrigendum : custom bid for services - 02 year maintenance contract for hmv in ntpc chp gadarwara-line item 10.10: deptt <> deployment of technician & electrician(adl) to carry out timely maintenance to ensure smooth functioning of all machines. for maintenance of all hme s (such as dozer/crane/pay loaders/hydra/backhoe loader/skid steer loader/ fork lifter/bot/excavator) during running or s/d. to investigate during machine breakdown, the cause of breakdown. to dismantling, repairing and replacing defective parts of breakdown machine. to inspect machine with oem engineer and finding solution to resolve problem. to maintaining the machine as per oem schedule to keep it in continuous operation. tech. (mech. & elect.) will have to report to their supervisor or ntpc representative daily. deployment of 02 hsw technician (01 mechanical & 01 electrical) per day to attend defects in any heavy mobile equipment. min. 05 years exp. with same field for hmv maintenance. line item 10.20: deptt <> deployment of automotive mechanic/electrician (adl) to carry out timely maintenance to ensure smooth functioning of all machines. for maintenance of all hme s (such as dozer/crane/pay loaders/hydra/backhoe loader/skid steer loader/ fork lifter/bot/excavator) during running or s/d. to check all machines on daily basis. to servicing all machines as per oem schedule. to replace faulty parts. to checking machine dashboard and replacing or repairing faulty meters. to checking and maintaining starter motor, battery and alternator on daily basis. to set tension of track chain assembly of dozer and excavator. to report to their supervisor or ntpc representative daily. deployment of 02 sw (01 hmv automotive mechanic & 01 hmv automotive electrician) per day to attend defects in any heavy mobile equipment. min. 05 years exp. with same field for hmv maintenance. line item 10.30: deptt <> deptt <> deployment of junior technician (adl) to carry out timely maintenance to ensure smooth functioning of all machines. for maintenance of all hme s (such as dozer/crane/pay loaders/hydra/backhoe loader/skid steer loader/ fork lifter/bot/excavator) during running or s/d. to grease the chassis/pin of all machines as per schedule. to check all types of oil, coolant in the machine on daily basis and topping up when short/less. to repair broken frames and bodies of machines by cutting, grinding and fabrication. to repair punctured tyres, and replace damaged tyres. to bring materials from ntpc store, keeping them organized in dozer shed store. to report to their supervisor or ntpc representative daily. deployment of 02 ssw junior technician per day to attend defects in any heavy mobile equipment. min. 05 years exp. with same field for hmv maintenance. line item 10.40: deptt <> deployment of helper(adl) deployment 02 usw helper to perform all supporting task (such as housekeeping, washing of equipment, picking up spare parts) as directed by the supervisor or eic. to report to their supervisor or ntpc representative daily. line item 10.50: opn of crane (>10 40 mt) (abcrn02gn702) 1. operation of mobile crane (such as rt-40, 11ton hydra) as per requirement during the general shift and extended hours anywhere as per requirement & as per instruction of engineer-in-charge. 2. checking and cleaning of mobile crane before starting of operation. 3. checking the water and diesel level in the vehicles on daily basis. 4. checking and guiding during diesel filling in the vehicles as per requirements. 5. visual inspection of the equipments, report to the site engineer or eic, defects if any. 6. operation of equipments as per site requirements in general shift. 7. parking the vehicles on proper location after completion of operation work. 8. any defects observed during operation to be reported immediately to eic. 9. check the machine daily as per the checklist and fill the checklist. 02 hsw operator with valid heavy mobile equipment driving license with minimum 03 years e

State Government

CTN :40018182

21 Apr, 2025 29.10 Lacs

Udhamsign Nagar - Uttarakhand

Tender For under jal jeevan mission scheme in khatima assembly constituency, repair work of road surface and track damaged by pipeline digging in bandiya, nankudi, shiv colony, adarsh colony areas (deposit item)

Central Government / Public Sector

CTN :40004695

22 Apr, 2025 80.37 Lacs

Kandla - Gujarat

Tender For custom bid for services - supply of spares for railway track maintenance contract at kandla foreshore terminal-schedule - a (supply of railway track material): 1, fish plate 60kg 1meter long, with bolt 12.00 pair, 2, fish plate 52kg 1meter long, with bolt 25.00 pair, 3, fish bolt 25x140 100.00 nos, 4, curved switch 52kg, 1:8.5 with fitting 1.00 set, 5, supply of 50mm ballast 900.00 mt, 6, supply of rail 60kg 3.922 mt, 7, supply of rail 52kg 13.491 mt, 8, check rail distance block 200.00 nos, 9, check rail bolt 25x190 full thred 225.00 nos, 10, single coil spring washar 500.00 nos, 11, j clip 750.00 nos, 12, grsp 5000.00 nos, 13, sleeper 60kg 40.00 nos, 14 juction fix plate 52 & 62 kg combination, 1meter long , (4plate called 1 set) 2.00 set, 9, 15 supply of cms x-ing 52 kg with checkrail &, fitting 1.00 set, 16, erc m-3 5000.00 nos, 17, gfn liner t-3702 (52kg rail & sleeper) 2500.00 nos, 18, ms liner t-3738 (52kg rail & sleeper) 5000.00 nos, 19 gfn liner t-3707 & 3708 (52kg rail & 60kg, sleeper) 2500.00 set, 4 sub-total for schedule - a, schedule - b (railway track work), 1 renewal of tongue rails & stock rails (straight or, curved) complete with fittings & fastenings,, ensuring proper housing & changing of stretcher, bars, if required; but excluding sleepers. work, also includes drilling of hole, if any required and, fixing of fish plates. released rails shall be, stacked at indicated place. {note : 1).one set, means two tongue rails and two stock rails (2), in case when only one tongue & stock rail are, replaced, only 50% of the quantity shall be, payable. (3) if only one tongue rail is replaced,, only 25% of the quantity of switch assembly shall, be payable} for respective item., 2.00 set, 2 deep screening of track in terms of para-238 of, indian railways permanent way manual in other, than psc sleepers of any density and screening, of complete ballast section. it includes opening of, ballast, digging down to specified depth below, bottom of sleeper to provide formation slope of, 1:40 towards drain or any prescribed direction,, taking out caked ballast, muck etc. from entire, ballast section, putting back clean ballast as per, required ballast profile, throwing away screened, muck arising out of screening on toe of bank or, on cess, if low or on spoil banks above top of, cutting (including throwing and leveling, if, required beyond minimum 5m from the edge of, cutting which are upto 3m deep or alternatively, carting it upto 50m for disposing it off beyond, cutting or platforms) as per direction of engineer, in-charge, including cutting cess, if required for, effective drainage upto a distance of 3.5m from, centre line of track on both sides and including, one round of kutcha packing with screened, ballast including attending to track parameter to make track fit for 20 kmph speed. necessary, wooden blocks shall be brought by the, contractor. 450.00 trm, 3 through packing of track, as described in para-, 224 of indian railways permanent way manual - 1350.00 trm, 4 fabrication (including cutting & bending) and, fixing of check rails of all sections as per, railway s approved drawings & specifications for, level crossings / trolley paths, duly cutting rail, flanges, wherever required to correct alignment, and level with railway s rail, fittings & fastenings,, drilling of holes in heck rails with all fittings, e.g., rail screws / grip expansion bolts, brackets,, packing pieces, bolts, washers etc. and as, directed by the engineer in-charge, 192.00 rm, 5 providing and injecting approved grout in, proportion recommended by the manufacturer, into cracks/honey-comb area of concrete/, masonry by suitable gun/pump at required, pressure including cutting of nipples after curing, etc. complete as per directions of engineer-incharge. (the payment shall be made on the, basis of actual weight of approved grout, injected.) epoxy injection grout in concrete/rcc, work of approved, make, 50.0

Central Government/Public Sector

CTN :40010421

09 May, 2025 NA

Jhansi - Uttar Pradesh

Tender For jhansi division -bsz-gtm- ctr (p) - 36.51 tkm & jhansi division -gtm-bzm ctr (p) - 32.23 tkm-ns item :- a) running track site:- replacement of old sleepers and rails (ctr) by dismantling existing track of all types of sleepers by making 13m loose rail panel (or any suitable length panel) with existing sleepers & sh rail (for removing existing track) with wider base sleepers/revised wider base sleepers at density of 1660 sleepers per km assembled with loose rail panel (or any suitable rail length panel of sh rail) in pqrs depot and placing over ballast properly during traffic block after removing panels of old sleeper and sh rail of 13 m loose rail panel (or any suitable length panel) wth the use of contractor's pqrs machine by providing auxilary track with gauge of 3400mm (either with the use of existing rail from existing track or with new rail unloaded by contractor from eur in block as instructed by sse/p-way, (if required) over metal/ wooden sleepers, to be provided by railway, 500 nos./rail km on both rails at the interval of 2m) and providing fish plates for joining loose sh rail over wider base sleeper for continuity of track and maintaining track parameters as per para 522 of irpwm 2020 to keep the track fit for 30kmph. sh rail over new wider base sleepers/revised wider base sleepers to be replaced with newlearlier existing rail on running track (with replacement of rutbber pad, liner & greased erc and greasing of liner contract area. grease to be used should be of 'o' graphite grease as per s code 408). as soon as loose rail length of track reaches 500m/750nm (as per decision of railway site engineer ie. sseje/ p-way), loading of track panel (sh rail over old normal sleeper and tied with erc) of approximately 13 m length over railway wagons and unloading of track panels of the length of 13 m (or any suitable length) and wider base sleepers/revised wider base sleepers will be done during traffic block. trr with the rail of the length of 250 m to 500m (preferably 20rail panel) will have to be done as soon as track of loose rail exceeds 500m length. further the contractor wil follow instructions of sse/p-way to relax speed of track upto maximum speed of section as per schedule laid down in irpwm 2020 para 708 for machine tamping with all machine packing related works such as recoupment of crib ballast, shoulder ballast, boxing and dressing. the whole process wil continue ill completion of work. auxilary track (at) will have to be removed with advancement of ctr work as per direction of railway (sse/jeip-way). b) pqrs depot: track panel with sh rail of 13 m or any suitable length over wider base sleepers/revised wider base sleepers/revised wider base sleepers will be made with necessary fittings in pqrs depot. loading of these panels over railway wagons and unloading of released track panels (released from running track) consisting of all types of rails & sleepers from railway wagon at pqrs depot using contractor's own portal crane including dismantling and stacking each component of track properly at designated locations. (note: this item of complete track renewal with wider base sleeper is a composite item and all activities as required will have to be done by the contractor with his/her own pqrs machine & other machines, tools and plants including all other resources as per requirement of the work (in pqrs depot and during traffic block in running tack). ralway will provide wagons and locomotives free of cost for loading/unloading and transportation tofrom pors depot/work site (running track) for loose rail panels with normal old sleepers and with wider base sleepers/revised wider base sleepers. nothing extra will be paid except the rates as mentioned against the item. raiway will also provide metal/wooden sleepers required for at, free of cost. various activities which are involved in ctr work are elaborated in "sequence of activities provided with tender schedule." (unit- per track km.).

Central Government And Public Sector

CTN :39989758

02 May, 2025 NA

Bongaigaon - Assam

Tender For supply of track guide for bwtb type wagon as per rdso drg. no. wd-00009-s-73 alt 02 or latest item no.-2, specification and material spec as per drg.

CTN :39915694

05 May, 2025 NA

Aurangabad-Mh - Maharashtra

Tender For fabrication and supply of 10125 mm curved thick web switches with zu-1-60/60e1a1, grade 880, class a, prime quality tongue rails and 60kg (uic)/60e1 grade 880/ r-260 class a/b prime quality stock rails and check rails with elastic fasteners and spring operated setting device to rdso drg. no t-6216 alt. 5 for 1 in12, bg 60kg turnouts for fan shaped layouts on psc sleepers with all fittin gs as per layout no.t-6155 alt. 13 and t-6155/1 alt. 8 in accordance with rdso standard layout drg. no.t-6154 alt. 9 complete with fittings as per fittings list attached excluding standard fish plates, fish bolts and nuts, ercs, insulating liners/metal liners and psc sleepers. (conforming to specification: ir s -t -10-2025, t -62 -2025, t-12-2009 and str: tdg0038, rev.0 ) n.b:stock rail, check rail and asym metrical zu rails for tongue rail required for this item will be arranged by vendor at their own cost vid e railway bd.'s letter no.2022/track-i(p)/fabricators dt. 24.01.2022. [ warranty period: 30 months af ter the date of delivery ]

Boom Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government / Public Sector

Central Government/Public Sector

Central Government And Public Sector