Latest booster pumping Tenders | Government booster pumping Tenders

Central Government/Public Sector

CTN :45237236

15 Jun, 2026 NA

Patti - Punjab

Tender For corrigendum : supply of main bearing set 08 nos , big end bearing 06 nos , crank thrust washer 03 nos , piston ring std set , cylinder sleeve set 03 nos , engine overhelluing gasket set , head gasket , connecting rod bolt , connecting rod bush 03 nos , inlet vlave 06 nos , exhaust valve 06 nos , valve guide inlet and exhuast , valve seat inlet and exhuast , valve oil seal inlet and exhaust , valve quarter lock , hydraulic lash adjuster hla , main oil seal rear , timing cover oil seal front , timing chain assy , timing chain adjuster pad , timing chain tensioner assy , crank timing gear front , belt set comp , clutch plate , pressure plate , release bearing hydrulic , pilot bearing , fly wheel assy , differeantial exhaust pressure pipe upper steel , differeantial pressure sensor rubber pipe , sensor differeantial pressure , self starter mounting patti dust shield clutch , abs sensor , fuel pump assy fuel module , bms sensor of battery terminal , rail pressure sensor , oil pressure sensor , invoirment atmosphere sensor ambient tempreature sensor , injector nozzle brash wahser winh o ring , diesel filter , air filter , oil filter , wheel cylinder assy rear , belt tensioner assy pulley idler , turbo charger nut and bolt , anna bond tube big size black , wd 40 spray big size , enginecleaning brush big and small , araldite tube , bolt 12 no with nut , bolt 10 no with nut , turbo charger assy , front disc brake pad , dosing nozzle clamp with 10 no bolt , turbo charger clamp with set packing , thermostat assy , tappet cover flat seal ring , water pump gasket ) /bid number : gem/2026/b/7555683 * /dated: 18-05-2026 & & / bid document 1 / 42

Central Government/Public Sector

CTN :45237143

15 Jun, 2026 NA

Kupwara - Jammu And Kashmir

Tender For bid to ras supply of piston set with pin and lock , piston ring set , main bearing , big end bearing , thrust washer , connecting rod bush , engine overhauling gasket with o ring and head gasket , inlet and exhaust valve , inlet and exhaust valve guide , inlet and exhaust valve seat , inlet and exhaust valve oil seal , front and rear crank shaft oil seal , inlet and exhaust rocker , chain tensioner set of 02nos , chain tensioner protector with lock set of 05nos , oil pump assy , water pump assy with pully , fan belt , fan belt tensioner , injectors with o ring , clutch plate , pressure plate , flywheel crank shaft pilot bearing , clutch cylinder lower and upper with adaptor , clutch cylinder upper , rubber hose pipe complete set with clamp , oil filter , diesel filter , air filter , ac filter , exhaust manifold stud 12no , turbo charger assy with gasket , inter cooler cover stud with bolt , benjo washer 12 14 17 19 22 no , thermostat valve , temprature sending unit , oil sending unit , heater plug , engine dummy plug , engine mounting left side , l key 14 no , valve grinding stick big and small , steel cleaning brush big and small , grinding paste , nut bolt 10 no , nut bolt 12 no , wiper blade ) /bid number : gem/2026/b/7555899 * /dated: 18-05-2026 & & / bid document 1 / 36

Central Government/Public Sector

CTN :45547643

03 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of 60-62 hp, 3 phase submersible pump energy efficient, 2860 to 3000 rpm, 03/04 stage, discharge: 2016 lpm (max.), head: 70-80 meter, rated current: 85.5 a (max.), efficiency: 58%, outlet: 125 mm, suitable for 6 inch dia 3 mtrs column pipe, with threaded ms flange should have tight in both threaded ends of column pipe, thickness of flange 1/2 inch each ms flange should have 8 nos 5/8 inch dia holes & suitable ms reducer or expander with the pump. make- ksb pumps ltd or similar [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45549198

15 Jun, 2026 NA

Ambala - Haryana

Tender For supply of 5 hp 3 phase 415 volt submersible motor pump set as per is no 8034/2002 or latest with 3 meters length submersible cable of suitable size, head range 62-170 meter, discharge 167-33 lpm, delivery size 38/40 mm. water lubricated type, maximum outside dia. of motor pump is 100-102 mm (v4), suitable for 150 mm to 300 mm bore dia. complete set should be as per pcee/nr specification no.181-elect./p-store matter/116 dated:-24.09.19.warranty: 30 months from date of supply. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45546877

29 Jun, 2026 NA

Multi City - Multi State

Tender For supply of 10 hp monoblock pumps minimum three & above star rated centrifugal water pump (monoblock), 415 v, three phase, 50 hz, a.c. supply of 7.5 kw/10 hp with discharge 1380/660 lpm for head of 24/72 m and 65 mm suction/50 mm rpm-2880, 3 phase, 415 volt. as per specification attached. [ warranty period: 24 months after the date of delivery ] ]

State Government

CTN :45521250

29 Jun, 2026 42.81 Lacs

Jaipur - Rajasthan

Tender For nit 21 work of replacement of submersible pump sets and accessories of tubewell at various locations under uwss chomu under jen section chomu (urban) under sub div chomu in jurisdiction of executive engineer, phed district division ii, jaipur - 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.2 up to 5.5 kw (7.5 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.4 7.5 kw (10 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.6 9.3 kw (12.5 hp) & head above 120 mtr., 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply.2.18.1 above 5 hp and up to 10 hp, 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. t

State Government

CTN :45541405

25 Jun, 2026 3.00 Lacs

Jummu - Jammu And Kashmir

Tender For providing, installation, testing and commissioning of submersible pump set having specifications 20000 gph x 110 mtrs head along with allied works at t/well bua datti under jmc capex (new works) 2026-27.

State Government

CTN :45541406

25 Jun, 2026 1.50 Lacs

Jummu - Jammu And Kashmir

Tender For providing, installation, testing and commissioning of submersible pump set having specifications 5000 gph x 60 mtrs head along with allied works at t/well ganesh nagar under jmc capex (new works) 2026-27.

State Government

CTN :45541495

25 Jun, 2026 2.65 Lacs

Jummu - Jammu And Kashmir

Tender For providing, installation, testing and commissioning of submersible pump set having specifications 30000 gph x 60 mtrs head along with allied works at t/well university era under jmc capex (new works) 2026-27.

State Government

CTN :45541505

25 Jun, 2026 3.00 Lacs

Jummu - Jammu And Kashmir

Tender For providing, installation, testing and commissioning of submersible pump set 01 no. having specification 20000 gph x 120 mtrs head each along with allied works at t/well poonch colony under jmc capex (new works) 2026-27.

Booster Pumping Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors