Latest bore well repair Tenders | Government bore well repair Tenders

State Government

CTN :40146911

08 May, 2025 27.16 Lacs

Kotputli - Rajasthan

Tender For work of construction and commissioning of 02 nos bore hole by dth/rotary/ combination/odex rig of 200 mm dia tube well and providing, laying, jointing and testing of pipeline and other allied works under sub div. virat nagar with 24 months dl period

Co-operative

CTN :40120374

12 May, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For c s item on conversion supply basis and forged steel item - c.s coupling having material as per is:1030 grade 280-520w for mill size 30"x60" as per drg. supply basis, conversion basis, machining charge, cast steel crown pinion having material is:2708 grade-iii-b for mill size 30"x 60" as per drg.supply basis, conversion basis, machining charge, c.s.trash plate having material as per is:1030 and grade-iii-b supply basis, conversion basis, machining charge, teeth cutting/grooving of trash plate as per drg., c.s.trash beam as per is-1030/is 2708 as per drg.supply basis, conversion basis, machining charge, forge steel tail bar for taxmaco and kcp mill having material c-40/8 as per drg. mh- 6 & mh-56supply basis, conversion basis, forge steel pinion for transmission gear of taxmaco mill as per drg. no. mh 39,material en-24,tensile strength70-80 kg./sqcm, hardness 200-220 bhn, c.s.bearing housing for taxmaco mill as per deg no mh-17-c/04 side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-17-b side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-17-b top roller housingsupply basis, conversion basis, c.s.gear coupling for c/f machine as per drg.no.bh-14 (duly case hardness), c.s. pinion for cane unloader as per drg, cu- 16teeth-17, teeth -18, c.s.sprocket 2" pitch (both pilot bore)(i) no of teeth 18 , boss dia 3", (ii) no of teeth 36 , boss dia 6", c.s.sprocket for boiler rotary feeder as per drg.blr-73/1 pitch- 25.0 mm,no of teeth 21, od -180mm. p.b -25 mm, c.s.sprocket for bagasse elevator (pilot bore) as per drg.mh-75 pitch 50.8 mm,no of teeth 50, od 842.70mm. pcd 808.7mm,teeth thickness 28mm , boss- 270x130 mm, cs sprocket (pilot bore ) as per drg.blr-62 pitch 50.8 mm, no.of teeth-14 pcd 226.49mm,od 258.8mm, static coller of 25 mm thick duly hard faced of 5 mm thick layer . total thick 30 mm after hard facing for taxmaco & kcp mill as per drawing no. mm 105(i) m.s. material, (ii) c.s.material, sprocket of inter carrier od 280 mm,no.of teeth 45.pitch 19.5 mm, c.s. sprocket (duplex) for enter carrier teeth 12, as per drg. mh-72/sample, s.s. wear plate is 304 quality (i) length 435 mm x width 370 mm x thick 15 mm, (ii) length 385 mm x width 330 mm x thick 15 mm, c.s.tresh beam bracket as per sample /drg., c.s.eccentric pin trash bar adjusting device as per drg. mh-133/2024-25, c.s. trash beam adjusting connecting rod for taxmaco mill, as per drg. mh- 297, c.s. bridge wheel for cane unloader as per drg. cu25 (1),, trolly wheel for cane unloader as per sample /drg., pinion gear set for cane unloader as per sample /drg, c.s. pinion (gear) for rbc cross carrier pitch 41 mm. teeth 25 , type of teeth in valute (spur) module 12.7 mm width 125 mm .od 343 mm, bore 2" dia as per drg., clutch shaft for mill. as per drg. mh-76 , en-8for taxmaco mill -sl.no.2, for kcp mill - sl.no.1, cs worm for crystilizer wheel od 290 mm, bore 81 mm.pitch 80 mm complete, groving of c.s. trash plate as per drg., idler wheel gear for cane unloader., no of teeth 68, od-420 mm, module-6, pitch- 18.84 mm, pcd-408 mm, as per drg. no. cu-25 (i), pinion for cane unloader no. of teeth- 33, od-212 mm, pcd-198 mm, pitch- 18.84 mm, module-6 as per drg. no., pinion for cane unloader no. of teeth- 18, od-200 mm, pitch- 35 mm, bore- 50 mm, width-115 mm, module-6, teeth depth-25 mm as per drg. no., break stand complete for cane unloader, size-10", cs sprocket of rbc, nos of teeth 12, as per drg. blr 32/93, chain sprocket for inter carrier clucth shaft, od 280, pcd 270, bore 108, root dia 260, nos of teeth 45, nos of hole 4, as per drg. 001, pinion for transmission gear kcp mill, material en-24(as per drawing no. mh-95/2024-25), c.s. helical teeth pinion, teeth-20, od-60, bore-26, pitch-10(as per drawing no. bh-rg-05/2024-25), c.s. helical teeth pinion, teeth-17, od-62, bore-28, pitch-13(as per drawing no. bh-rg-04/2024-25), chief engineer

CTN :39641389

28 Apr, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For bid to ras corrigendum : custom bid for services - one time repair case for undertaking overhauling and specific dr on engines of lcm 411412413 414 of ins jalaswa- scope of work(services)- 1 major overhaul - moh lcm boats 3, 2 cylinder block reconditioning 3, 3 crank shaft reconditioning 3, 4 flywheel & housing checking if required replacement 8, 5 cylinder head reconditioning (each cyl. head) 6, 6 checking and reconditioning of main bearing bore 3, 7 overhauling of fresh water pump 3, 8 overhauling of lub oil pump 3, 9 overhauling of fuel pump 3, 10, chemical cleaning and pressure testing of fresh water cooler-keel cooler system, flushing only 8, 11 chemical cleaning and pressure testing of lub oil cooler 3, 12 chemical cleaning and pressure testing of return fuel oil cooler 8, 13 chemical cleaning and pressure testing of exhaust manifold 6, 14 air inlet filter cleaning 32, 15 changing of lub oil & fuel filter (01 set) 8, 16, changing of control cables engine (throttle, acc. , air shut off, fuel shut off), each 3, 17 renewal of hoses with unions (list of inaccessible hoses) 3, 18 renewal of gauges (each guage) 9, 19 renewal of piston rings (each piston) 36, 20 renewal of connecting rod (each c/rod) 36, 21 renewal of crankshaft bearing (each brg pair) 21, 22 renewal of cylinder liner (each cyl. liner) 36, 23 renewal of gasket (cylinder head, cac, tc, coolers) each 3, 24 overhauling of governor 8, 25 overhauling of vane blower (each blower) 6, 26 renewal of connecting rod brgs (each pair) 36, 27 overhauling of starter 8, 28 check/replacement of rocker arm and push rod 3, 29 renewal of crankshaft oil seal ring 3, 30 renewal of crankshaft rear oil seal 3, 31 overhauling of gear train and timing marks 3, 32 changing of solenoid shut off valve 8, 33 changing of thermostat element (each th.) 12, 34 calibration of pressure temp switch 8, 35 assembling the cylinder head and changing of gasket (each cyl. head) 6, 36 all exhaust valve replacement, setting and renewal of seal 6, 37 calibration/changing of fuel injector (each inj.) 96, 38 changing of injector tube (each tube) 36, 39 decarbonization of cylinder head (each head) 6, 40 chemical cleaning and pressure testing of cylinder head (each head) 6, 41 fuel rack adjustment 16, 42 governor setting 8, 43 tappet setting 8, 44 check all instrumentation for working 8, 45 crankshaft deflection reading 3, 46 renewal of piston assy with piston installation kit 36, 47 gauging/reconditioning of camshaft assy 6, 48 renewal of camshaft bearings 30, 49, renewal of camfollowers, valve bridges, shafts, springs, washers of cylinder head, assy, 6, 50 renewal of vibration damper 3, 51 overhauling of accumulator pump 8, 52 overhauling of hand charging pump 8, 53 cleaning and inspection of steering gear pump 8, 54 repair/renewal of sea water pump 8, scope of work( supply of spares)-1, tube kit, injector hole (includes 5104701 seal rin 8925981 36, 2 nut, 7/16"-20 5117629 72, 3 piston kit cr/hd (18:1) 23522497 36, 4 ring set, piston std gap 23526990 36, 5 spacer 5144846 72, 6 bolt, 7/16"-20x2.00" l. (12 point) 5148373 72, 7 guide, exhaust valve 5129919 144, 8 seal assy. 8921209 144, 9 kit, 12v, one bank 5149512 6, 10 valve kit 5228769 96, 11 tip assy. (5d45) 5229026 96, 12 valve, inj check 5228694 96, 13 plunger and bushing assy. (5n65) 5228668 96, 14 tube asm fuel cyl head to injection (short) 23533307 96, 15 tube asm fuel cyl head to injector (long) 23533308 96, 16 hose, bulk #8x25 ft. (12.8550) 5199576 3, 17 hose, bulk #6x25 ft. (12.8550) 5199575 3, 18 elbow, 90 deg. 3/8" inv. fl. tube 1/4 nptf brs 8925030 12, 19 connector, 3/8" inv. fl. tube (12.9460) 8925048 3, page 38 of 66, 20 connector, 3/8" inv. fl. tube (12.9460) 8924171 3, 21 blower kit (small bearing) 23514203 6, 22 tube assy.,oil (blower drive support) 23515803 3, 23 clamp assy. (t-bolt) 5106219 6, 24 connector 1/8 nptf brass .025 restr 23509534 3, 25 insert, filter adaptor(4.2240) 5103892 3, 26 filter assy., lub oil spin 23530408 16, 2

State Government

CTN :40095051

30 Apr, 2025 1.50 Crore

Nagaur - Rajasthan

Tender For construction and commissioning of bore hole by dth/rotary/ combination rig of 200mm dia, supply and installation of energy efficient submersible pump sets, panels, cablesand other allied works including commissioning and testing of tube well under jurisdictionof division didwana with 24 months defect liability with 5 years operation andmaintenance (arc)

State Government

CTN :40095053

30 Apr, 2025 1.50 Crore

Nagaur - Rajasthan

Tender For construction and commissioning of bore hole by dth/rotary/ combination rig of 200mm dia, supply and installation of energy efficient submersible pump sets, panels, cablesand other allied works including commissioning and testing of tube well under jurisdictionof division kuchaman with 24 months defect liability with 5 years operation andmaintenance (arc)vol-

State Government

CTN :40094993

12 May, 2025 2.50 Crore

Tonk - Rajasthan

Tender For drilling of bore hole by dth combination rig of 200 mm dia supply and installation of energy efficient submersible pump sets panels cables and other allied works including comm and testing of tw in sub division malpura under jurisdiction malpura

State Government

CTN :40094996

12 May, 2025 2.50 Crore

Tonk - Rajasthan

Tender For drilling of bore hole by dth combination rig of 200 mm dia supply and installation of energy efficient submersible pump sets panels cables and other allied works including comm and testing of tw in sub division todaraisingh under jurisdiction malpura

State Government

CTN :40053721

24 Apr, 2025 24.70 Lacs

Nagaur - Rajasthan

Tender For work of construction and commissioning of bore hole bydth/rotary/ combination rig of 200 mm dia, supply and installation of energy efficient submersible pump sets, panels,cables and other allied works including commissioning and testing of tube well and p,l & j of pipe line underjurisdiction of div didwana with 24 months defect liability

State Government

CTN :40077014

30 Apr, 2025 1.50 Crore

Didwana - Rajasthan

Tender For construction and commissioning of bore hole by rig of 200 mm dia, supply and installation of energy efficient submersible pump sets, panels, cables and other allied works under phed dn didwana

State Government

CTN :40056119

28 Apr, 2025 24.70 Lacs

Didwana - Rajasthan

Tender For work of construction and commissioning of bore hole by dth/rotary/ combination rig of 200 mm dia, supply and installation of energy efficient submersible pump sets, panels, cables and other allied works including commissioning and testing of tube

	Apr 2025
Su	Mo	Tu	We	Th	Fr	Sa
30	31	1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	1	2	3
4	5	6	7	8	9	10

	Mar 2025
Su	Mo	Tu	We	Th	Fr	Sa
23	24	25	26	27	28	1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30	31	1	2	3	4	5

	Apr 2025
Su	Mo	Tu	We	Th	Fr	Sa
30	31	1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	1	2	3
4	5	6	7	8	9	10

	Mar 2025
Su	Mo	Tu	We	Th	Fr	Sa
23	24	25	26	27	28	1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30	31	1	2	3	4	5

Bore Well Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors