Latest bottom roller Tenders | Government bottom roller Tenders

Central Government/Public Sector

CTN :41666743

29 Sep, 2025 NA

Noida - Uttar Pradesh

Tender For procurement of acv auxiliary ard-25 spares - equipment: ac system, make / model:- sutrak carrier / tm 31 hd, primary filter- metal bowl, control cable series 40 (port) 28.0mtr, 4280 mm propeller pitch hose assembly 6. fittings @, 6800 mm propeller pitch hose assembly 5, fuel shut-off cable 24 mtrs, control cable series 40 (stbd) 24.5 mtr, hydraulic fluid low with plug and socket (electrotec), level sensor nmea 2000 3281-0321mm, out board strip 1, flexible exhaust link, standard closed segment, fwd landing skid rubber mount, filter drier, equipment: cpp system, make / model:- ghl uk, st/st rod end rh male m16 gar hw16rr, balanced steering cylinder kit 7065, 3010 mm propeller pitch hose assembly 4, 3220 mm propeller pitch hose assembly 1, long arm riveting plier, line mounted relief valve-rv10 26c3b n 15, taperlock bush aft lift fan (55mm dia) 3525-55, propeller layshaft bearing sleeve nut and tab washer, plumber block lip seal, key 18x10, key 20x12, key 18x11, transmission pulley, 6850 mm propeller pitch hose assembly 9, 4550 mm propeller pitch hose assembly 3, 1570 mm hose assembly 1. fittings @ 90 degree, 1520 mm hose assembly 3. fittings @ 110 degree, 2270 mm propeller pitch hose assembly 2, 1170 mm steering hose assembly 6, 1570 mm steering hose assembly 7, sleeve (h2313 ), eriks tpe r seal (85x120x12) 316 st/st, lock washer(mb13), 22313ek skf bearing, dowty seal 1/2" st/st, equipment:- deck / hull / skirt, sikaflex gun skeleton m301-075, rivet alum 4.8 x 19 mm, pop rivet alum 3.2 x 9.7mm, pop rivet 4.8 x 10mm/ 5 mm big head rivet/ rivets pop 4.8mm (ad66sb ), screw csk posi a2, nut/ nylock nut m6 a2/ m6 nut nylone, washer m6 penny a2/ m6 penny washer, standard craft tool kit, hull emergency repair kit contains: 1xalum sheet 2mm, standard open segments, skirt emergency repair kit, 4130 mm skirt shift assembly 4. bulkhead ram.stbd (h0021807), inboard 4mm cheveron strap, hose assly 3/8"(360 mm skirt shift hose), hose assly 3/8"(370 mm skirt shift hose), metal oval hatch, rapid link 14mm large mouth, hose assly 3/8" (240 mm skirt shift hose assly 7 valve-valve (h0021810), hydraulic cyclinder seal kit skirt system, d shackle 20mm ed621120, strop matrix inboard 5+f68mm (red), strop matrix inboard 4mm (red), round inspection hatch/ plastic round hatch, strop matrix outboard 4mm (black), rope strop 7/8 870mm, cold skirt bonding agent, strip shackle 8mm, d shackle 8mm, nut cap nylon 1/2" 05500 13cn, bridge plate, strop matrix outboard 5mm (black), vetus ufo stainless deck ventilator, skirt shift matrix assembaly, outer loop, inner loop, rivet alum pop, washer m8, m10 washer form b, rudder, elevator blade, 2830 mm skirt hose assembly 1. bulkhead - ram. port(h0021804), starboard inboard rudder, tie rod long, tie rod feedback, tie rod short, temperature switch, rod end m 12 (sme 45.12), rod end m8, inboard 5mm chevron strop, hose clamp, 8mm key pin shackle, 8mm bow shackle, equipment: lift fan, make / model :- ghl uk, shaft lift fan, fwd lift fan bearing, taper lock bush3020x50, washer spring m12, screw m12x30, taper lock bush 75 mm bore, bolt m8 x 25 hex hd a4, drive belt 14mgt-1610, aft lift fan bearing, lift fan shaft seals - aft, equipment:- steering, make / model:- accu steer hm-260, emergency steering hydropack, equipment:- electrical, make / model:- accu steer hm-260, strip led, orange beacon, light stern with assy/3541002 24v, light starboard side 24v 3541002(green), spare bulb, bulb (flap switch)en507026, spare bulb 02-90400006, essential supply isolator 24 v dc coil albright sw80-1907, canbus cable can-201

Central Government/Public Sector

CTN :41657490

23 Sep, 2025 NA

Korba - Chhattisgarh

Tender For supply of conveyor bottom roller 1400mm , conveyor bottom roller 2000mm

Central Government/Public Sector

CTN :41619058

08 Sep, 2025 NA

Sundergarh - Odisha

Tender For supply of bottom roller assly, dwn: pd/r-221351 , support roller assly, pd/r-375054, pn: 1-8

Corporations And Associations And Others

CTN :41591919

24 Sep, 2025 NA

Babina - Uttar Pradesh

Tender For operation and maintenance of electro mechanical equipments of existing matatila intakewell 45 mld and 110 mld wtp at babina under augmentation and strengthening scheme distt jhansi - routine, periodically and breakdown maintinance of all equipments, associated accessories installed at various units at matatila head works including supply,opening and refixing, transportation , loading, unloading , t&p etc., matatila headworks, routine maintinance and servicing of 320 kva d g set including all necessary spares, oil, filters, diode and lubricant as per norms, repairing and overhauling of 650 lps discharge kirlosker make pumps with following works. model mf 40-45, dismantling, carting and re-installation of pump set including testing on load at site with all labour and t&p, supply and fixing of new ball bearing-6415 and oil seal., supply and fixing of new thrust bearing-51320m, fabrication, supply and fixing of fully balanced new pump shaft made of ss 410 as per sample., reconditioning of pump shaft with rematling, machining and balancing complete in all respect., reconditioning of pump impeller with rematling, machining and balancing complete in all respect., supply and fixing of new impeller for pump as per sample and zise, supply and fixing of new shaft sleeve, chuck nut made of ss 410 as per sample., supply and filling of lubricating oil in every 6 months, supply and fixing of new fastners, supply and filling of glande packing as per size and sample., supply and fixing of new glande plate with stud and nut., repairing & maintenance of kirloskar make induction motor with following works, dismantling, carting and re-installation of motor including testing on load at site with all labour and t&p, rewinding of 75 kw, 736 rpm, 3 phase induction motor with f-class insulated copper wire, nomax paper, sleeves, varnishing etc. complete with all material and t&p., rewinding of 55 kw, 736 rpm, 3 phase induction motor with f-class insulated copper wire, nomax paper, sleeves, varnishing etc. complete with all material and t&p., supply and fixing of new ball bearing-nu318c3, supply and fixing of new ball bearing-6318c3, fabrication, supply and fixing of new rotar shaft as per sample and material., reconditioning of rotar shaft with rematling, machining and balancing complete in all respect., reconditioning of bearing housing with rematling, machining and balancing complete in all respect., routine greasing of induction motor bearings with high temprature jelly grease in every 30 days intervals, supply and fixing of new fastners, supply and fitting of motor connection plate with suitable size of lugs as per sample etc. complete., repairing and maintenance of 600mm size sluice valve with following works, dismantling, carting and re-installation of sluice valve with all labour and t&p, supply and fixing of spendle for sluice valve made of ss 304 as per size and sample, supply and fixing of bush for sluice valve made of gun metal as per size and sample, supply and fixing of disc and body sheet for sluice valve made of gun metal complete with all maching and finishing, supply and fixing of glande plate with studs 600mm size sluice valve as per sample, supply and filling of glande packing as per size and sample, routine servicing of ht panel, 45 mld wtp, repairing and maintenance of 300mm dia size sluice valve at desluding with following works :-, repairing of desludging valve 300 mm dia spendle brass & gun metal, tefloan clf wheel, repairing and overhauling of sluice gate 500x500 mm size at backwash outlet with following works :-, dismentaling, carting, refitting and testing with all labour and t&p required at site, fabrication, supply and fixing of new threaded spindle shaft made of ss:316 as per size and sample, fabrication, supply and fixing of new bush made of gun metal and wage piece as per size and sample, fabrication, supply and fixing of new fix and moving sheet made of gun metal as per size and sample

corporations/Associations/Others

CTN :41680059

24 Sep, 2025 NA

Jaduguda - Jharkhand

Tender For auction sale of iron and steel scrap,high carbon steel scrap,manganese steel scrap,tc rods scrap (straight),drifter rod scrap,rubber scrap,m.s. barrel of lubricants (empty) scrap 210 ltrs,rubberlined steels pipe scrap,electric scrap,aliminium (utensils) scrap,copper scrap consisting super enameled copper wire,brass / gun metal,tyres of vehicle / machine size above 1000mm,tyres of vehicle / machine size below 1000mm,scrap motors assorted sizes,bi-cycle,batteries,used oil duly packed in ms barrel of 205 itrs,turning scrap,bearing scrap,wire rope scrap with / without wooden spool,machinery parts scrap and rock drill spares scrap,button bits scrap,tools scrap,chemical bottles scrap,misc. e-waste items

Central Government/Public Sector

CTN :41665685

17 Sep, 2025 81.16 Lacs

Talcher - Odisha

Tender For dismantling erection of top rollers bottom rollers its brackets in c4 c5 c6 c7 conveyors at rls bocp including its alignment cutting of rope along the conveyor or entangled at any drum of the conveyors for a period of 2 years

Corporations And Associations And Others

CTN :41434587

09 Sep, 2025 NA

Gurdaspur - Punjab

Tender For corrigendum : e auction for old dairy machinery scrap and old vehicles on one time rate contract basis and ldpe films and milk trays on annual contract basis - items description:, ldpe film damage (annual rate contract for 01 year) approx. 307.910 kg, milk trays damage (annual rate contract for 01 year) approx. 1300 kg, ms scrap old unserviceable approx. 4 ton, gun metal scrap approx. 52 kg, ln2 container big and small approx. 19 nos, pre pack machine old unserviceable, bmc (bulk milk cooler) 3000 ltr old unserviceable, ss scrap old unserviceable approx. 79 kg, bearing scrap old unserviceable 203 nos, chiller 4000 ltr old unserviceable, milk pasteurizer 10 klph old unserviceable, visi cooler 300 ltr old unserviceable, maximo mahindra old unserviceable, tata 709 old unserviceable

CTN :41567343

15 Sep, 2025 2.27 Lacs

Bokaro - Jharkhand

Tender For supply of top roller, 127mm x 422mm x 456mm , bottom roller, 127mm x 1545mm x 1600mm , belt fastner 2 inch , belt fastner 3 inch

Central Government/Public Sector

CTN :41518917

11 Sep, 2025 44.11 Lacs

Chhindwara - Madhya Pradesh

Tender For supply of shaft and roller kit for top and bottom roller d d - kit 1200 mm top and bottom roller , shaft 1000 mm for bottom roller , shaft 1000 mm for top roller , shaft 800 mm for top roller , shaft 1200 mm for top roller , shaft 1200 mm for bottom roller , shaft 800 mm for bottom roller , kit 800 mm top and bottom roller , kit 1000 mm top and bottom roller

Bottom Roller Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors