Latest box scrap Tenders | Government box scrap Tenders

Central Government/Public Sector

CTN :45083159

12 May, 2026 NA

Harnaut - Bihar

Tender For auction sale of depot ferrous scrap - scrap steel casting ( drag boxes centers castings stretcher casting pivot cbc components, knuckles axle boxes & buffer cases, rubbing blocks etc [our offer:- scrap compression spring, bracket, cbc main pin, front & rear carrier plate, wedge, spring loaded supporting device, rest plate assembly for four & three spring, base assembly of supporting device of four spring],i lot no. ea982604008, location-near west & north side of hrs shop floor

CTN :45086300

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - lot no.y.cs-1.exmp.n-2.05.26.26 description- scrap steel castings [drag boxes, centres castings, streatcher casting, pivot, cbc components, knuckle, axle boxes, suspention tube and buffer cases, rubbing block etc. our offer- control arm, roller bearing component, ctrb backing ring and other miscellaneous cs-1 items, as in the lot [loading will be done by purchaser's own arrangement]

CTN :45086304

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/30/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) er 72029562906 bobrm1 (wm) 2) er 72029661692 bobrnm1 (wm) 3) nr 75039260183 bobsnm1 (nlb) 4) se 75079218106 bobsnm1 (nlb) 5) cr 75019260158 bobsnm1 (nlb) 6) se 10079617986 boxnm1 (nlb) nb: (1) : i) wagons are to be sold with 04 nos. wm trolleys against srl. no. 01 and 02. ii) wagons are to be sold without 08 nos. nlb trolleys against srl. no. 03 to 06. ii) wagons srl no 01 to 06 to be sold without 24 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :45086305

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/29/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079260648 bobsnm1 (nlb) 2) nr 75039160568 bobsnm1 (nlb) 3) cr 75019260103 bobsnm1 (nlb) 4) se 75079215020 bobsnm1 (nlb) 5) er 75029060830 bobsnm1 (nlb) 6) special repair 75069260054 bobsnm1 (nlb) 7) nr 75039188050 bobsnm1 (nlb) 8) cr 75019208051 bobsnm1 (nlb) 9) nr 75039160810 bobsnm1 (nlb) 10) nr 75039160520 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 20 nos. nlb trolleys against special repairl. no. 01 to 10. ii) wagons special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :45086306

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/28/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079260754 bobsnm1 (nlb) 2) nr 75039187923 bobsnm1 (nlb) 3) sc 75099160133 bobsnm1 (nlb) 4) cr 75019208020 bobsnm1 (nlb) 5) cr 75019260097 bobsnm1 (nlb) 6) ne 75049260012 bobsnm1 (nlb) 7) nr 75039160537 bobsnm1 (nlb) 8) se 75079215273 bobsnm1 (nlb) 9) nr 75039187893 bobsnm1 (nlb) 10) se 75079260532 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 20 nos. nlb trolleys against srl. no. 01 to 10. ii) wagons srl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :45086307

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/27/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079160320 bobsnm1 (nlb) 2) se 75079260266 bobsnm1 (nlb) 3) se 75079260334 bobsnm1 (nlb) 4) se 75079216317 bobsnm1 (nlb) 5) se 75079218250 bobsnm1 (nlb) 6) nr 75039160780 bobsnm1 (nlb) 7) se 75079260471 bobsnm1 (nlb) 8) er 75029260179 bobsnm1 (nlb) 9) nr 75039187725 bobsnm1 (nlb) 10)se 75079260389 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 20 nos. nlb trolleys against srl. no. 01 to 10. ii) wagons srl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

Central Government/Public Sector

CTN :45054943

11 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl no: 98050126. condemned and unserviceable ferrous melting scrap consisting of side buffer plungers, buffer casings with/without spindle, knuckles and coupler yoke for cbc,end shields,control arms,connecting rods, axle boxes, axle box housings with or without original attachments, bmbc components ,side bearer covers,gear wheels of sizes ,screw couplings and its link parts, bearing cover casings,grease collors,tensioning rods,anchor links with or without silent blocks, brake shoes with or with out brake blocks, draw hooks, draw beams,draft keys,iron pulleys, pipes of sorts and sizes, spacers,sims,washers, bolts,nuts, studs,pins, brackets,brake shoe keys, metal rings, rods of sorts and sizes, cotter pins, full/broken coil springs, hanger blocks, iron balls of roller bearings and its inner and outer spacers, huck bolts,huck bolt tails , ms plate cuttings, traction motor end shields, end locking screws ,bearing racers, locking plates, bearing adapters,valves of sorts and sizes , brake rigging components, ctrb bearings and its components, connecting rod assemblies, buffer plunger full assemblies , valve springs , buffer spindles, axle box covers, angle cut pieces , main bearing caps, connection straps, cam shaft parts, cut off angle cocks, bss hanger pins, pull rods,damper brackets,center pivot top and bottom parts,cbc couplers,compensating beams,bearing housings/axle box caps, transmission bars, right angle gear covers, cr tanks,traction motor components , vibration dampers, gate valves, isolating valves, ball joint traction lever,tm motor ip cores,cooler headers,roll links,traction centers, liner sleeves,air duct assemblies,brake headers, and other similar items melting in nature.note: 1] crane loading is permitted. 2] if any non ferrous items found, should be removed and returned to railways by the purchaser.

Central Government/Public Sector

CTN :45054874

11 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap condemned overaged unserviceable released coaching and wagon ms items consisting of 1) ladder with foam coating. 2) demu filters. 3) control arm assembly with silent block. 4) control arm assembly without silent block. 5) buffer plunger with spindle. 6) brake pad holder/caliper. 7) lavatory door frame. 8) em pad /cc pad. 9) adaptor (wide & narrow jaw). 10) demo axle box cover plate. 11) axle box pivot bush/ silent block. 12) brake shoe. 13) slip assembly 14) control arm upper & lower 15) fall plate 16) axle end cover of lhb. 17) silent block of traction joint. 18) stiffener plate of lhb. 19) knuckle pin & drawbar pin. 20) pu cap base. 21) miscellaneous - operating handle, lock assembly, nut bolt, pipes, a/cocks, brake block keys & other minor items etc.

CTN :45042593

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of depot ferrous scrap - pl no. 98050448, scrap m.s. consisting of box wagon body cutting, pipe, rod, nut-bolt, slack adjuster, hand wheel, control rod, bogie end pull rod, side bearer, channel, angle, wagon door and other box wagon body cutting parts available on the lot.[excluding steel wagon door & steel plate, knuckle, pivot, adopter if available on the lot.]

Central Government/Public Sector

CTN :45031584

08 May, 2026 NA

Multi City - Haryana

Tender For auction sale of depot ferrous scrap - scrap components of pivot, c.p. top and bottom of sorts and sizes with or w/o attachments us and ur. loc- material at open area sre side ,beside of electric tower in judw. remarks- loading by purchaser.

Box Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector