Latest brackets scrap Tenders | Government brackets scrap Tenders

CTN :45547144

06 Jul, 2026 NA

Liluah - West Bengal

Tender For supply set of hydrant valve consists of 1. forged brass valve of 1 inch size- 1 no. (specification: body, bonnet, ball, stemconfirming to forged brass is 6912 gr. flb and premium quality ptfe gland packing/seating2. gi nipple2x6 inch -1 no 3. gi reducer 2x1 inch-1 no. 4. gi nipple 1x3 inch -1 no.5. gi nipple 1x6 inch - 1 no. 6. gi bend 1x6 inch-1 no gi nipples of galvanized is 1239 pipe with bsp threads. [ warranty period: 30 months after the date of delivery ]]

Central Government/Public Sector

CTN :45306043

20 Jun, 2026 40.00 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : maintenance of day to day complaints of water supply including connected items at various loc under ge nagrota - m&l for repair/rectification of leakage to water supply distribution lines 15 mm dia to 25 mm dia gi tubing by necessary excavation, returning/filling as required, tightening of loose joints of union, elbow, socket etc, threading if required including replacement of gi union/socket/nipple as required complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 40 mm dia to 50 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 80 mm to 150 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing /di /ci /ms of 150 mm dia to 300 mm dia complete all as specified and directed. note : (i) the complaints for the above works shall be registered by contractor at the water supply complaint cell of age e/m (ii) stationary required such as complaint book, job cards etc shall be arranged by the contractor and proper record shall be maintained by the contractor.(iii) tools ,plumber with helper and transport with driver for attending of above complaints shall be arranged by contractor. (iv) the rate quoted by the contractor for above jobs under item no 1 to 4 shall be inclusive of cost of works under note (i) to (iii) above. (v) the said complaints shall be rectified within 12 hrs of the registration of the complaints failing which recovery of rs.500/commplaint shall be made for contractors due payment (vi) the stores/item required for the works under item no 1to 4 shall be measured separately under relevant item as supply only. (vii) excavation, returning/ filling shall be measured and paid for separately and material required for the works above shall be included to quoted rates., excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep including getting out in hard/dense soil complete all as specified and directed., returning /filling including watering , leveling , spreading and well ramming in layers not exceeding 25cm thick complete all as specified and directed., removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 50 metre above the starting point complete all as specified and directed., refixing/relaying of old retrieved steel tubing in new or old position with and including new gi fittings (connections) and as per site requiremen laid in trenches, above ground level or in any position of following sizes as under complete all as specified and directed : -, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, taking down unserviceable gi tubing / upvc tubing from any position complete with all fittings & connections from any position of following sizes as under complete all as specified and directed :-, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and fixing/laying & testing of galvanised steel water tubing, medium grade, isi marked complete with all new galvanized fittings of following sizes laid in trenches/ above ground level or in any position complete all as specified and directed :, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and laying upvc pipe tubings medium grade pressure rating 10 kgf/cm2 isi mark with all fittings such as elbow, bends, sockets, nipples and union etc and fixed complete laid in trenches or in any other position of following sizes as under complete all as specified and directed , 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply only gi fittings, medium grade, isi marked of following sizes as under complete all as specified and directed :-, union 15 mm dia, union 20mm dia, union 25mm dia, union 32mm dia, union 40mm dia, union 50mm dia, socket 15 mm dia, socket 20 mm dia, socket 25 mm dia, socket 40 mm dia, socket 50 mm dia, reducer socket 40mmx50mm, reducer socket 15mmx20mm, reducer socket 20mmx25mm, elbow 15mm dia, elbow 20mm di

Central Government/Public Sector

CTN :45528036

22 Jun, 2026 1.75 Crore

Sagar - Madhya Pradesh

Tender For supply of flow nozzle assembly with root valves and nipples-457 x 29.3618inch, a182 f91, 1500 rtj , flow nozzle assembly with root valves and nipples-88.9 x 11.133inch, a182grf91, 1500 rtj , flow nozzle assembly with root valves and nipples-114.3 x 8.564inch, a105, 600 rf , flow nozzle assembly with root valves and nipples-60.3 x 5.542inch, a105, 600 rf , flow nozzle assembly with root valves and nipples-168.3 x 10.976inch, a105, 600 rf , bi-directional venturi with root valves and nipples-219.1 x 8.188inch, a105, 300 rf , integral flow orifice assembly with manifold- 33.4 x 4.551 , a105, 600 rf , integral flow orifice assembly with manifold-48.3 x 5.081.5 , a105, 300 rf , integral flow orifice assembly with manifold-48.3 x 5.081.5 , a105, 600 rf , flow orifice assembly with root valves and nipples-48.3 x 7.141.5inches, a105, 1500 rtj , flow orifice assembly with root valves and nipples-60.3 x 5.542inches, a105, 300 rf , flow orifice assembly with root valves and nipples-88.9 x 11.133inches, a105, 1500 rtj , flow orifice assembly with root valves and nipples-114.3 x 6.02 4inches, a105, 300 rf , flow orifice assembly with root valves and nipples-168.3 x 3.406inches, a182f304, 300 rf , flow orifice assembly with root valves and nipples-219.1 x 20.628inches, a105, 1500 rtj , flow orifice assembly with root valves and nipples- 219.1 x 3.768inches, a182f304, 300 rf , flow orifice assembly with root valves and nipples-323.8 x 4.5712inches, a182f304, 300 rf , spare - blind plate suitable for 1inch 300 rf -for s.no.8 above , spare - blind plate suitable for 1.5inch 300 rf -for s.no.9 above , spare - blind plate suitable for 1.5inch 600 rf -for s.no.10 above , spare - blind plate suitable for 1.5inch 1500 rtj -for s.no.12 above , spare - blind plate suitable for 2inch 300 rf -for s.no.13 above , spare - blind plate suitable for 3inch 1500 rtj -for s.no.17 above , spare - blind plate suitable for 4inch 300 rf -for s.no.18 above , spare - blind plate suitable for 6inch 300 rf -for s.no.20 above , spare - blind plate suitable for 8inch 1500 rtj -for s.no.22 above , spare - blind plate suitable for 8inch 300 rf -for s.no.23 above , spare - blind plate suitable for 12inch 300 rf -for s.no.26 above , condensate chamber moc is a106grb class-3000, ibr , condensate chamber moc is a106grb class-6000, ibr , condensate chamber moc is a335p22 class-6000, ibr , condensate chamber moc is a335p91 class-6000, ibr

Central Government/Public Sector

CTN :45492965

01 Jul, 2026 NA

Duliajan - Assam

Tender For tender for supply of pipe fittings nipples tees wing unions unions and stud bolt - nipple swadge npt size two inch x one inch x six and half inch , nipple swadge apilp size half inch x one fourth inch x three and half inch , tee equal 300 psi npt size half inch , tee equal 300 psi npt size one inch , tee equal fcs 3000 psi size four inch , union female 300 psi size one fourth inch , union wing mic four inch x 1000 psi , union wing rigid type four inch x 6000 psi , union hex black 700 psi size one fourth inch , union galvd bstpt 700 psi size one inch , bolt stud alloy steel f thd half inch x two and half inch

Central Government/Public Sector

CTN :44846184

12 Jun, 2026 6.69 Lacs

Gaya - Bihar

Tender For bid to ras supply of fire fighting equipments d d - dcp type fire extinguisher capacity 6 kg , fire hose cabinet , 25mm dia gunmetel gate valve , 25mm air release valve , 80mm dia butterfly valve , butterfly valve 100 mm , swinging type hose reel , 25mm dia gun metal globe valve and nozzle , 3 mm thick rubber gasket , 25mm dia socket union nipples lumpsum , 15mm dia ms socket and teflon tape lumpsum , single head stainless steel hydrant valve , packing gaskets , industrial type pressure gauges with gun metal or brass valves , adjustable rosette plate for 15mm dia powder coated , 80mm dia non return valve , 100mm dia non return valve , 68 degree centigrade upright sprinkler , 68 degree centigrade pendant sprinkler , 1000mm flexible drop , 1200mm flexible drop , 1500mm flexible drop , 150mm dia butterfly valve , paint

State Government

CTN :45455583

29 Jun, 2026 NA

Multi City - Gujarat

Tender For se 2322: supply for various size of upvc, gi and steel pipes, fittings and consumable of plumbing material for civil maintenance dept. on as and when requirement basis at gsecl,sshep, ekta nagar - upvc sch40 for cold water pipe 25 mm dia 1, teflon tap crown ,champion make or equivalent 10mtr, wash basin supply pipe with end socket, waste coupling for wash basin, upvc sch40 for cold water pipe 15 mm dia one half, wc seat cover, waste pipe for sink & urinal, upvc coupling one half and 1 heavy duty, upvc elbow one half and 1 heavy duty, upvc tee one half and 1 heavy duty, upvc mta one half and 1, upvc union one half and 1, upvc coupling with one side thread one half and 1, bib cock one half, stop cock male threads one half, pillar cock one half, end cap one half, upvc reducer 1,one half, swr pipes is 13592 for drain 110mm dia, g.i. socket steel coupling one half, heavy duty, g.i. socket steel coupling 1, heavy duty, union joint socket steel for 1, union joint socket steel for one half, g.i. elbow equal steel pipe fittings one half and 1, g.i. tee equal steel pipe fittings one half and 1, floor drain traps having round shape and made up of ms sheet with chrome polish, connection pipe with nut pvc metal braided pipe connection pipe with nuts, 15 mm angle stop valve conforming to is8931, latest, 15 mm bib taps conforming to is8931,latest, 15 mm piller tap conforming to is8931,latest, 1 inch and one half inch nominal size carbon steel screwed end, general purpose ball valve, one half inch hot finished seamless ,hfs barrel nipples steel pipes fitting, hot-finished seamless, hfs plug steel pipes fitting for one half and 1 inch

State Government

CTN :45452775

15 Jun, 2026 NA

Mandi - Himachal Pradesh

Tender For supply of elbow, equal, 135 degrees conforming to is 1239 (part 2) (q4) steel sockets confirming to is 1239 (part 2) (q4) , running nipples, close taper nipples and barrel nipples confirming to is 1239 (part 2) (q4) , nipples, hexagon, equal confirming to is 1239 (part 2) (q4) , elbows, tees and crosses, equal confirming to is 1239 (part 2) (q4) , socket reducing confirming to is 1239 (part 2) (q4) , socket unions confirming to is 1239 (part 2) (q4) , plug confirming to is 1239 (part 2) (q4)

corporations/Associations/Others

CTN :45417185

18 Jun, 2026 8.09 Lacs

Rajahmundry - Andhra Pradesh

Tender For supply of store materials for maintenance of water supply (o attend leaks) in lalachervu in rmc.- 110m dia pvc couplings , 110mm dia pvc bends , 110mm dia pvc cid joint , 110mm dia pvc couplings , 110mm dia pvc dummy , 110mm dia pvc elbows , 110mm dia pvc reducers , 110mm dia pvc tile pieces , 110mm dia upvc pipe , 118ml cpvc solvent solution , 3/4" gi bends , 3/4" gi couplings , 3/4" gi elbows , 3/4" gi union , 3/4" upvc ball valve , 3/4" upvc couplings , 3/4" upvc elbows , 3/4" upvc fta , 3/4" upvc mta , 3/4" upvc pipe , 3/4" x 110mm pvc saddle , 3/4" x 12" gi nipples , 3/4" x 6" gi nipples , 50mm dia pvc ball valve , 50mm dia pvc bends , 90mm dia pvc reducers , manufacture, supply and delivery of hdpe pipes confirming to is: 4984-1995 including transportation to any where in a.p., excluding excise duty, sale tax and specials etc. complete (supply upto 90mm dia in coil & above 90mm dia straight length in 6 m.) as per ss for 110mm dia, pn6, pe-100 grade hdpe pipes in 6 mtrs length , manufacture, supply and delivery of hdpe pipes confirming to is: 4984-1995 including transportation to any where in a.p., excluding excise duty, sale tax and specials etc. complete (supply upto 90mm dia in coil & above 90mm dia straight length in 6 m.) as per ss for 90mm dia, pn6, pe-100 grade hdpe pipes in 6 mtrs length , manufacture, supply, delivery and fixing of required m.s. fabricated pipe and specials (bends, tees and reducers etc.) using required size m.s. sheet and providing redoxide paint and anticorrosion paint two coats including cost of all materials conveyance to work spot and all labour charges etc. complete as per the instructions of the departmental authorities. , shellac bottles , supply and delivery of "resilient seated soft sealing" gate valves (sluice valves) with body and bonnet of ductile iron ggg-40/sg-400/15 or ggg-50/sg-500/7 or equivalent as per is1865, is:3896-2 and wedge fully rubber lined with food grade quality grade w270 grade epdm, replaceable spindle nut without gland packing with 3-o ring protection system on the shaft and seals of nbr. the valves should be vacuum tight and 100% leak proof with face to face dimensions as bs:5163 type a/is:14846. all the valves should be with fusion bonded electrostatic powder coating both inside and outside (min 250 microns)- ral 5005 with pocket less straight through body passage conforming to design standards of din-3202f4/bs:5163 type a flange drilling as per is - 1538 excluding all taxes, duties and transportation. for 100mm dia pn 1.6 (mpa) , supply and delivery of "resilient seated soft sealing" gate valves (sluice valves) with body and bonnet of ductile iron ggg-40/sg-400/15 or ggg-50/sg-500/7 or equivalent as per is1865, is:3896-2 and wedge fully rubber lined with food grade quality grade w270 grade epdm, replaceable spindle nut without gland packing with 3-o ring protection system on the shaft and seals of nbr. the valves should be vacuum tight and 100% leak proof with face to face dimensions as bs:5163 type a/is:14846. all the valves should be with fusion bonded electrostatic powder coating both inside and outside (min 250 microns)- ral 5005 with pocket less straight through body passage conforming to design standards of din-3202f4/bs:5163 type a flange drilling as per is - 1538 excluding all taxes, duties and transportation. for 150mm dia pn 1.6 (mpa) , supply and delivery of 100mm dia x 15mm thick ms flanges including cost of bolts, nuts, rubber packing etc. complete and flange thickness confirming to is: 7322 - 1985 and flange dimensions confirming to is: 1538-1993 excluding cost of m.s. specials including cost of materials and conveyance to work spot and all labour charges etc. complete as per s.s. , supply and delivery of 110mm dia hdpe long neck collars confirming to is 4984-1995 of approved standard make including cost and conveyance to work spot and all labour charges etc. complete as per ss. , supply and delivery of 150mm dia x 15mm thick ms flanges inc

CTN :45407833

23 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of bush eg8338v 07256602a 03 , bush eg8338v 07256602a 05 , bush eg8338v 07256602a 06 , bush eg8338v 07256602a 08 , bush eg8338v 07256602a 27 , bush eg8338v 07256602a 38 , csk copper screw eg8338v 07256602a 64 , pinion shaft dm q 589 06 , ratchet dm q 589 07 , key bar dm q 589 11 , bush dm q 589 19 , bush dm q 589 18 , spring dm q 589 05 , grub screw dm q 589 dd , circlip dm q 589 ww , bush dm q 589 13 , bush dm q 589 14 , foundation bolt for 1 st reduction gear box and 2 nd reduction gear box assy 0726602 d 10 , hex nut 0726602 d 11 , lock nut 0726602 d 12 , plain washer 0726602 d 13 , foundation bolt for base plate 0726602 d 14 , foundation bolt for base plate 0726602 d 15 , hex nut 0726602 d 16 , lock nut 0726602 d 17 , dowel pin 07256603 d 22 , drain plug 07256603 d 23 , spring washer 07256603 d 38 , hex hd screw 07256603 d 39 , hex hd screw 07256603 d 40 , spring washer 07256603 d 45 , oil level indicator 07256609 d 16 , spring washer 07256609 d 38 , hex screw 07256609 d 39 , csk screw 07256609 d 40 , circlip 07256609 d 44 , brake hand wheel 07256602a 23 , brake spindle 07256602a 28 , dip stick 07256602a 31 , bevel wheel 07256602a 36 , bevel pinion 07256602a 37 , dog chain 07256602a 59 , oil plug 07256602a 68 , dog chain 07256605c 19 , bearing 3012 158 105 , bearing 3012 158 106 , bearing bush 3012 158 110 , thrust bearing 3012 158 111 , bush bearing 3012 158 112 , slipping clutch 3012 158 116 , bearing for worm 3012 158 117 , bearing for worm 3012 158 118 , grease nipples 3012 158 119

CTN :45393028

24 Jun, 2026 NA

Multi City - Multi State

Tender For supply of electric point operating machine irs type 220 mm stroke, high thrust, [ac immunity 160 v ac] rotary locking type, non-trailable to operate on 110 v dc, complete with lock & detector slide, cable terminal box and clamp lock & ground connection as per specification no. irs:s 24/2025rev-3.0 and assembly drg. no. rdso:s 11000 and rdso: s-3395 and for motor irs: s-37/82 amdt. -3 with external clamp point lock 60 kgs, tws, as per drg. no. rdso: s-3454 and with insulation sets and nuts, bolts [suitable for 220 mm throw irs point machine] using 60 kg rail. additional four numbers of felt pad along with felt cover assembly, and five numbers of grease nipples to be supplied along with each point machine as spare for replacements of these accessories due to being defective during operation forday-to-day maintenance of the point machine. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 0 %age , item category : normal , total po value variation permitted: max 8 lacs ] [ rate of supply 80 units per month , commencement time allowed -2 month ]

Brackets Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

corporations/Associations/Others