Latest braille display system Tenders | Government braille display system Tenders

CTN :41044281

21 Jul, 2025 NA

Sagar - Madhya Pradesh

Tender For supply of procurement of vibration switch spare for all process units at bpcl, bina refinery

CTN :41023133

18 Jul, 2025 NA

Ambala - Haryana

Tender For supply of instrument and general items - brass probe sensors for donnelly chute level transmitter (bolt and nut type), diameter 42mm, length 60mm , pressure switch make: danfoss, range 2 to 14 bar, differential 0.7 to 4 bar , process connection:g1/4 a contact type: spdt , microprocessor based digital tachometer, make: beacon, model: ldm-5004 , range: 100 to 19990 rpm, input: magnetic pickup model mp-265 number of teeth seen by mpu: 6 power supply: 230vac , pneumatic cylinder janatics model: a630400500m with rod & fork , pneumatic cylinder janatics model: a120401600 with rod & fork , pneumatic cylinder janatics model: a630500500m with rod & fork , air flow regulator 8mm to 1/4" (pu connector) , filter element 582044 for frc15 janatics make , smart vac transmitter with zero and span buttons , k type thermocouple compensating cable , (red & yellow) inner: pvc, outer: ss braided, size: 0.5 sqmm , temperature indicator, make: selec model: tc303 , pid controller , make: delta model: dtk size: 72mmx72mm supply: 230 vac, , i/p: temperature o/p: dual output relay(2no+2nc+2com) , 4-20 ma signal isolator make: pepperl + fuchs, supply: 24vdc , smart pressure transmitter 0 to 14 kg/cm2 process connection: 1/2" bsp , air filter regulator make: janatics model: frc1 1/2" bsp , masibus loop calibrator model: uc12 , smart level transmitter diaphragm type with zero and span buttons , range: 160kpa, mwp: 1.97 mpa for juice tank level , smart dp transmitter range: -500 to 0 mmwc with zero and span buttons with , hart compatible mwp: 140kg/cm2 (for old boiler drum level) , pressure gauge 0-16 kg/cm2 6" dial, bottom entry, 1/2" npt , pressure gauge 0-25kg/cm2 6" dial, bottom entry, 1/2" npt , pressure gauge 0-7 kg/cm2 6" dial, bottom entry, 1/2" npt , pressure gauge 0-6 kg/cm2 6" dial, bottom entry, 1/2" npt , pressure gauge 0-160 kg/cm2 6" dial, bottom entry, 1/2" npt , compound gauge -1 to +1.5 kg/cm2 6" dial, bottom entry, 1/2" npt , pressure switch range: 0 to 3 kg/cm2 (oil service) , process connection: 1/2" npt , 5 valve manifold , body material: aisi 316 ss, stem type: hard seated, stem packing: ptfe, size (inlet x outlet): 1/2" x 1/2", threads: npt (ansi b 1.20.1), connections: female x female, max. working pressure: 413.7 bar (6000 psi) max. working temperature: 240c, "t" bar handle: aisi 304 ss, drain port: " npt (f), plugged , 3 valve manifold , body material: aisi 316 ss stem type: hard seated, stem packing: ptfe size (inlet x outlet): 1/2" x 1/2" threads: npt (ansi b 1.20.1), connections: female x female, max. working pressure: 413.7 bar (6000 psi) max, working temperature: 240c, "t" bar handle: aisi 304 ss drain port: " npt (f), plugged , 2 valve manifold , body material: aisi 316 ss stem type: hard seated stem packing: ptfe size (inlet x outlet): 1/2" x 1/2" threads: npt (ansi b 1.20.1) connections: female x female max. working pressure: 413.7 bar (6000 psi), max. working temperature: 240c "t" bar handle: aisi 304 ss, drain port: 34" npt (f), plugged , i to p convertor make: abb, model: teip11/teip11-ps , air filter regulator make: janatics model: frc1 process , connection: 1/2" npt , smart dp transmitter for boiler drum level range: -500 to 0 mmwc , with zero and span adjustment , supply: 24vdc, o/p: 4-20 ma, hart compatible , smart pressure transmitter for turbine control oil pressure , range: 0-16 kg/cm2 supply: 24 vdc, output signal: 4-20 ma, hart compatible , vibration sensor make: shinkawa, part no: fl-202f08a-m2-00-25-05 , extension cable for vibration sensor make: shinkawa, part no.fw-202fa-85 , extension cable for axial displacement sensor make: shinkawa, part no.fw-202fa-85 , simatic dp, et 200 m, redundancy bundle consisting of 2 no. of im modules 153-2hf (model: 6es7 153-28a10-0xb0), 1 no. of bus module in/in (6es7195-7hd10-0xa0) no spare , 4 channel relay module din rail mount with reverse blocking diode and led indicator coil voltage: 230vac , 4 channel relay module din rail mount with reverse blocking di

Central Government/Public Sector

CTN :41021818

15 Jul, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For paharpur level and vibration switches for st 1,2,3 ct fans at ntpcunchahar - switch,lvl,float,0-500mm,paharpur, vibration switch,mmr-2 p87-3051-1, microswitch assy,oil lvl sw ct,paharpur, switch,lvl,displacer,0-300mm,p87-4116-1

CTN :40978094

26 Jul, 2025 NA

Mumbai - Maharashtra

Tender For tender for supply of male crimp connectors , pcb edge connector , terminals , limit switches , rtd probes 0-150 degree c. , key switch , isolated base igbt/diode module , speed control pcb , po connector , female crimp contacts , thermo couple probes 0-650 degree c. , dc contactors 24v dc (3no+1nc contacts) , limit switches , anti vibration mounts , lcd display pcb , dial range 0-150 deg c , temp.to voltage converter pcb , temperature sensor , power supply pcb , toggle switch , main control pcb , power resistor , igbt driver , multi chan vme signal condcards type 64c2-b , temp.measurement pcb , single board computer type vme-7807rc , dial range 0 to 750 deg c , tacho pcb 24v dc , i/p tacho voltage (02-36v ac) , multi chan vme signal cond cards type 64c2-a , over load relay 3-5a , tft screen , speed sensor , auxiliary display , temperature indicator/controller pcb (pt 100) type 7130-pt , bridge rectifier , multi chan vme signal cond cards type 64c2-c , flame in/out relay , mov , current sensor pcb , power contactor , push button , flasher/timer pcb , temperature cutout , contact element no , key switch , analogue pressure gauge range 0-10 bar , ana.guage dial range 0 to 600 deg c , boiler torch ignitor

CTN :40962242

14 Jul, 2025 2.31 Lacs

Varanasi - Uttar Pradesh

Tender For providing of custom bid for services - calibration of vacuum pressure gauge,custom bid for services - calibration of vacuum pressure switch,custom bid for services - calibration of master pressure gauge,custom bid for services - supply of pressure gauges,custom bid for services - calibration of lux meter,custom bid for services - calibration of ultrasonic thickness gauge,custom bid for services - calibration of earth resistance meter,custom bid for services - calibration of multimeter/ clampmeter,custom bid for services - calibration of elcometer,custom bid for services - calibration of torque wrench,custom bid for services - supply of vibration meter,custom bid for services - supply of anemometer,custom bid for services - supply of sound meter,custom bid for services - supply of infrared temp gun,custom bid for services - calibration of ph meter,custom bid for services - calibration of pressure switches,custom bid for services - calibration of temperature gauges,custom bid for services - calibration of temperature switch

State Government

CTN :40950747

18 Jul, 2025 1.77 Crore

Srinagar - Jammu And Kashmir

Tender For supply, installation, testing and commissioning of 2 no. chillers with cooling tower in central ac plant of main hospital at skims soura - sitc of vfd based, ahri/ eurovent certified, water-cooled, mono/ twin screw type chiller of capacity not less than 100 tr with allied items. the item shall be complete and ready to be connected with main headers in the existing central air conditioning plant of skims soura. the chiller shall be accompanied with microprocessor based control panel with all safety, switch gears needed for safe, smooth and hassle-free operation. the job includes laying of foundation as per oem recommendation which shall be not less than 6 inches above the finished floor level. the technical specifications are further detailed in annexure b., sitc electric-motor driven centrifugal pump for condenser and chiller sides having a discharge of 15 to 18 litres per second, head of 30 metres, 1450 rpm. the technical specifications are furhter detailled in annexure b., insulated chilled water piping (nitrile rubber insulation)supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 kg/ cum density, thermal conductivity 0.037 w/mk or better at 20 deg mean temperature class o insulation applied by suitable adhesive complete including repairing of damage to building etc. as per specifications and as required complete in all respect.note: the pipes of sizes 150mm & below shall be m.s. c class as per is: 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per is: 3589, from minimum 6.35mm thick m.s. sheet for pipes upto 350 mm dia., 300 mm (32mm nitrile insulation thickness), 250 mm (32mm nitrile insulationthickness), 150 mm (32mm nitrile insulationthickness), 125mm (32mm nitrile insulation thickness), 100 mm (32mm nitrile insulationthickness), 80 mm (32mm nitrile insulation thickness), 65 mm (32mm nitrile insulationthickness), sitc of butterfly valves with di body double flanged construction with epdm coated disc with long pitch and pn 16 pressure rating as per is 13095 (1991), 250 mm , 150 mm , 125 mm , 100 mm , 80 mm , 65 mm , providing and fixing of aluminum cladding of 0.63 mm thick sheet to the insulated pipelines including bends, valves, fittings, etc. the job includes grooving, providing and fixing of screws, washers etc. as per is : 2676 - 1981, 300 mm (32mm nitrile insulation thickness), 250 mm (32mm nitrile insulation thickness), 150 mm (32mm nitrile insulationthickness), 125mm (32mm nitrile insulationthickness), 100 mm (32mm nitrile insulation thickness), 80 mm (32mm nitrile insulationthickness), 65 mm (32mmnitrile insulation thickness), sitc of ductile iron non-return valve of following size with allied jobs as per site requirement. the valve shall be conforming to is-5312. pressure rating : pn16, 150 mm , 125 mm , 100 mm , sitc of y-strainer (ci) flanged end, of following size with allied jobs as per site requirement. pressure rating : pn16, 150 mm , 125 mm , 100 mm , 80 mm , sitc of balancing valve (ductile iron) of following size with allied jobs as per site requirement. pressure rating : pn16, 150 mm , 125 mm , sitc of t-strainer (c.i.) of following size with allied jobs as per site requirement. pressure rating : pn16, 250mm , sitc of fully stainless steel pressure gauge (bourdon beryllium copper, socket ss316l, case and bazel ss304), rugged construction with epdm blowback, safety glass. 0-40 kg/cm , dual display bar/psi or selectable, sitc in position the bi-metal dial thermometer temperature guage 4 dail size bsp (m) connection, ss case and ss wetted parts completer as required, sitc of air release valve of following size. air release valves shall be provided at all higher points in piping system for venting., 25 mm dia , sitc

Central Government And Public Sector

CTN :40902187

28 Jul, 2025 1.75 Lacs

Chittorgarh - Rajasthan

Tender For providing of calibration services - mechanical; mechanical vibration switch; nabl labs; buyer premises (onsite)

CTN :40903374

21 Jul, 2025 NA

Uttara Kannada - Karnataka

Tender For tender for supply of spares of da cotrol panel - anti vibration mounts , exciter current rectifier 25a rating , buzzer with intermittent sound , power supply pcb battery charger for da lcp mcr panel , battery 12v , smps , signal conditioning module , switch type 2as 2-2p 22 5 dia 2 position , timing module 0-30 mins 230v ac a1d1x , pressure signal conditioning module , logic controller module for me lcp , logic controller module for mer , logic controller module , push button 22 5 dia type 2af green , push button mushroom red , rotary switch , indicator lamp 24v dc 22 5 dia type plbr green , indicator lamp 24v dc 22 5 dia type plbr red , remote hmi , connector , dc relay 12v 3 c o type mcc 24d , dc relay module 4 relay type , voltmeter 0-40 v dc 72 mm , mcb 2 p 10a , level switch , bridge rectifier , snubber capacitor , bolt m10x75

State Government

CTN :40872507

14 Jul, 2025 1.26 Crore

Multi City - Karnataka

Tender For re babbiting-dismantling of bearings and pads from housing,rebabbiting of 10 nos tgb thrust pad along with all accessories,rebabbiting of turbine guide bearing, mid bearing & end bearing along with floating seals and all accessories,material composite test, ut test and dp test should be done for re-babbitted material,assembly of re-babbited bearings with blue match,submitting the video graphs of re-babbiting and reports of re-babbiting.re-alignment-the reason for shifting of generator shaft by 2 to 3 mm shall be analyzed and rectification works needs to be carried out,complete dismantling, assembling, painting and re-alignment of machine shaft,inspection of turbine shaft journal surface and repairs if required,inspection/replacement of worn out bushes and seals of guide vane, if necessary,inspection and repair of labyrinth ring, face plates, guide vanes and runner,guide vanes bed setting,tgb water cooler descaling work to improve the efficiency of cooler,complete assembly of machine,checking the magnetic axis of the generator and to ensure its alignment, checking of the unit leveling at all places and complete alignment of machine shaft,testing & commissioning of complete machine,painting of entire machine,checking of vibration & site balancing of machine,submission of vibration, balancing & alignment reports.flow switch-supply and installation of flow switch (flow rate110 lpm) along with 01 no 01 nc contact for inlet and outlet lubrication oil pipelines,supply and installation of pressure switch (30bar) for inlet and outlet lubrication oil pipelines,supply and installation of level switch for in tgb oil sump.replacement of new miv trunion shaft-dismantling of miv counter weight, miv servomotor assembly, and other related parts,lifting of miv from the bed,transportation of miv to the firms place, if required,replacing old nitrile rubber trunnion seals with existing profile by new one on both sides,replacements of miv trunnion shaft. providing of necessary drawings,material composite test, ut test and dp test should be done for new trunnion shaft & trunnion seals, bushes etc,all related fasteners and dowel pin to be replacing by new one,drive and non drive end trunnion bush, cupseals, stop end plate, washer ring etc need to be replacing by new one,repair of miv discand main body to be attended, if required,supply and replacement of miv disc rubber seal,pressure testing and commissioning should be carried out as per standard in presence of kpcl engineers,all tools & tackles required for the above mentioned works shall be arranged by contactor only.

corporations/Associations/Others

CTN :40835912

14 Jul, 2025 2.10 Lacs

Haveri - Karnataka

Tender For dma/hvr/2025-26/water supply materials annual maitainance/ts - electrofusion reducer 90 by 75 mm, pvcbend140mm dia, pvcbend75mm dia, pvcelbows180mm dia, pvcelbows160mm dia, pvcelbows140mm dia, pvcelbows110mm dia, pvcelbows90mm dia, pvcelbows75mm dia, pvcelbows63mm dia, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron di conforming ti is1865 with the latest amendments and of grade ggg 40or50, provision for corresponding dia ms flanges should be made in the estimate.etc. comple for sluice valve of pn 10and 200mm, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron di conforming ti is-1865 with the latest amendments sr rates of valves and provision for corresponding dia ms flanges should be made in the estimate. etc. completfor sluice valve of pn10.0 and 150mm , providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron di conforming ti is-1865 with the latest amendments and of grade ggg 40 50, shaft of stainless steel, wedge fully rubber lined with edpm seals of nbr and the valves should be vacum tight and 100complete specification as per item no2.23.2, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile irondi conforming ti is 1865 with the latest amendments and of grade ggg 40or50, complete specification as per item no 2.23.1, supply, installing,testing and commissioning common control panel consisting of the following incoming no set of phase indicating lamps with sfu of suitable rating no, analog ammeter, no analog voltmeter 1ni with phase selector switch, complete specification as per item no 13.24.1, supply, installing,testing and commissioning common control panel consisting of the following incoming set of phase indicating lamps with sfu of suitable rating , analog ammeter, analog voltmeter 1ni with phase selector switch, complete specification as per item no 13.23, supply of isi mark 175mm nominal bore,plain and steel casing pipe grade of steel fe 410 of wall thickness conforming to is 4270 2001 and latest ammendments, complete specification as per item no 12.32, pvccouplers 200mm dia, pvccouplers 140mm dia, pvccouplers 110mm dia, pvccouplers 75mm dia, pvccouplers 63mm dia, handglovess, pvcreducer 110 mm dia, pvcreducer 90 mm dia, pvcreducer 75 mm dia, pvcreducer 63 mm dia, pvcreducer 50 mm dia, pvcservice saddles 90 mm dia, pvcservice saddles 75 mm dia, pvcservice saddles 63 mm dia, pvcbend 160 mm dia , pvcbend 110 mm dia , pvcbend 90 mm dia , pvcbend 50 mm dia , pvctee 160 mm dia , pvctee 110 mm dia, pvctee 90 mm dia, pvctee 75 mm dia, pvctee 63 mm dia, pvctee 50 mm dia, pvctee 40 mm dia, pvctee 25 mm dia, pvcelbows 200 mm dia, pvcelbows 50 mm dia, pvcelbows 40 mm dia, pvcelbows 32 mm dia, pvcelbows 25 mm dia, pvc flebyible hose pipe 1inch, upvc column pipe 1inch, hdpe pipe grade pe100-pn 10, 63mm , medium duty gi pipe of 25mm dia , medium duty gi pipe of 20mm dia , opvc reducer 200x160 , opvc reducer 160x110 , opvc reducer 110x90 , opvc sliding coupler 200mm pn16 , opvc sliding coupler 160mm pn16 , opvc sliding coupler 110mm pn16 , pvc pipes of 6 kg/cm2 for 90mm(1.313) , opvc sliding coupler 60mm pn16, supply and delivery at site 50mm(2inch) dia heavy duty unplasticized pvc column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof epdm ring with isi mark with its latest amendments, supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (c class) as per is 1239 (part-i) 1990 with latest amendments with isi mark (one end fitted with heavy duty collar and other end fitted with protective cover)50 mm , supply and laying of lg ut cable having aluminium conductor pvc insulated, sheathed, galvanized steel wire / steel tap armored cable with pvc over sheathing., pvc pipes of 6 kg

Braille Display System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government And Public Sector

State Government

corporations/Associations/Others