Latest brake hanger lever Tenders | Government brake hanger lever Tenders

Central Government/Public Sector

CTN :45085528

26 May, 2026 NA

Imphal - Manipur

Tender For supply of 10a switch 1 way , 20a p type 1 way switch , 3 pin 6a socket , 16a socket , 4m cover plate , 6m cover plate , 8m horizontal cover plate , 12m cover plate , 6m surface box , 8m surface box , 12m surface box , 1m fan regulator , 16 way gi box , 18 way gi box , 20mm pvc jbox 2way , 20mm pvc jbox 3way , 20mm pvc jbox 4way , 20mm 3 by 4 pvc bend , 20mm pvc elbow , 20mm gi saddle heavy duty , cable ties 200x4.8 mm , 16mm wood bit carbon steel , self screw bits assorted , 20mm pvc flexible pipe , 12w led cob downlighter , 18w led cob downlighter

State Government

CTN :44346380

07 May, 2026 2.60 Lacs

Krishna - Andhra Pradesh

Tender For bid to ras supply of supply and installation of networks components for office systems d d - network access switch , cat6 lan cable box , modular face plate , cat6 i and o keystone jack -user side , surface back box , cat6 patch cord , rj45 connectors with boot , cat6 keystone jack -rack side , pvc casing and capping - 32 mm , pvc casing and capping - 19 mm , modular surface box -8 module , modular switch - 6 amp , modular socket - 6 amp , electrical cable - 3 core 2. 5 sq. mm , modular surface box -3 module , pvc conduit pipe - 25 mm , pvc long bend - 25 mm , pvc c-clamp - 25 mm , nylon cable ties , flexible pvc conduit - 25 mm , electrical insulation tape

CTN :45091406

13 May, 2026 NA

Kanchrapara - West Bengal

Tender For supply of brake hanger lever assly (in board), in set consisting of 02 nos. l.h. & 02 nos. r.h. in each set for wap4 locos. clw's drg. no. 03/3/19/120 alt.-'2'. ref. no. 84 & 85 of drg. no. 03/1/19/36 atl.-17. bush matl :- mn steel to irs : r-65-78. note : vendor should purchase mn steel bush as per irs: r-65-78 from approved source as mentioned in uvam ld - 2101026 & also comply it's crushing test along with test as per cee/op's letter no. "el/90/7/0/5/sd dated 11/11/2019 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45013390

06 May, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of modified brake hanger lever (outer) as per rdso drg. no. skel-4551 alt.- 2 ref 1 to 7 with grey paint. spec: [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45049698

12 May, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of modified brake hanger lever assembly (rh) as per rdso drg. no. skel - 4553, alt .2. ref.2 & 3 to 6 with grey paint. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :45034478

20 May, 2026 NA

Chittorgarh - Rajasthan

Tender For tender for supply of radiation resistant cctv camera : : - type-ii (color ccd/cmos , 100m rad) radiation resistant camera head along with radiation resistant pan & tilt unit and mounting brackets. as per attached annexure-1 , corrigendum annexure-2 and annexure-3. , cabling system to transmit signals form vault cameras to ccu system which includes camera to ccu radiation resistant composite cable of 300 meters with 6 sets of cable connectors and applicable power cables as per annexure-1 , corrigendum annexure-2 and annexure-3. , field camera control unit and its racking system which includes 2 no. of camera control unit sub rack & 6 sets of camera control unit (ccu) cards (3 to be installed in field and 3 to be kept as spare for future ) as per annexure-1 , corrigendum annexure-2 and annexure-3 or equivalent sub rack system as per annexure-1 , corrigendum annexure-2 and annexure-3. , setup to convert ccu signals to optical signals which should include 3 no. of fiber optic transmitter and receiver set (capable of 4 camera system) and 6 no. of fiber patch cords , single mode , simpex and 3 no. of light interface unit 12 port , as per annexure-1 , corrigendum annexure-2 and annexure-3. , type-vi (color ccd/cmos sensor , non rr auto dome camera) with mounting brackets as per annexure-1 , corrigendum annexure-2 and annexure-3. , mechanism to transmit signal from non radiation resistant camera including , poe power supply for non-rr ptz camera (6 no.) field jb /rack in ss material for non-rr ptz camera (2 no.) liu 6 port , din rail mountable for non radiation resistant ptz camera (3 no.) din rail 8 port un-managed network switches (3 no.). 4 no. of fiber patch cords , single mode , duplex for non-radiation resistant ptz camera or equivalent as per annexure-1 , corrigendum annexure-2 and annexure-3. , mechanism for receiving signal at control room including light interface unit 24 port , rack mount (2 no.) and network video encoder (minimum 16-channel) along with accessories for intra-panel connections (2 no.) and 24 port un-managed network switches or equivalent (2 no.) , 4 no. of fiber patch cords , single mode , duplex as per annexure-1 , corrigendum annexure-2 and annexure-3. , recording and monitoring pc as per annexure-1 , corrigendum annexure-2 and annexure-3. , joystick suitable for mounting on control room panel cutout as per panel drawing as per annexure-1 , corrigendum annexure-2 and annexure-3. , 21 inch led backlit led color monitor as per annexure-1 , corrigendum annexure-2 and annexure-3. , video monitoring software setup as per annexure-1 , corrigendum annexure-2 and annexure-3 for minimum 9 camera. , mobile dolly consisting of camera control unit (ccu) , encoder , switch , joystick , engineering laptop with 15-inch to 17-inch screen , video management software for one camera , connection cables etc and their cabling as per annexure-1 , corrigendum annexure-2 and annexure-3. , control panel/rack 42u/ 27u setup for racking all instruments of cctv at control room as per annexure-1 , corrigendum annexure-2 and annexure-3. , cabling network optical fiber cable (6 core armored cable)-2000 meters twisted pair cable , rs485 , signal cable -200 meters unarmored coaxial cable rg59 -200 meters ethernet cable , cat-6 utp cable -610 meters video connector set -10 meters ethernet connectors rj-45 100 pieces conduit for cables 800 meters and other separate cables/ power cables/accessories required during installation one set of tool tackles for assembly/ disassembly/ of radiation resistant camera head viz. allen keys , lubricants , cable ties , loctite , heat sink , blank caps etc. 2 no. of control panel/rack size 27u setup for racking all instruments of cctv at field as per annexure-1 , corrigendum annexure-2 and annexure-3. as per annexure-1 , corrigendum annexure-2 and annexure-3 . , site installation & commissioning as per annexure-1 , corrigendum annexure-2 and annexure-3. , spare radiation resistance camera head s

CTN :45031617

06 May, 2026 NA

Multi City - Odisha

Tender For auction sale of others - lot no. sse/cs/2025-26/39, srl no.[1] tie bar with hanger of pbu/tbu loco, qty-36 sets, wt-4320 kgs, srl no.[2] adjusting plate bottom of pbu/tbu loco, qty-100 nos., wt-1112 kgs, srl no.[3] hanger lever (kbil/ftil make), qty-72 nos., wt-907.20 kgs, srl no.[4] wheel set guide, qty-10 nos., wt-241 kgs, srl no.[5] brake equalizer assly. qty-10 nos., wt-113 kgs, srl no.[6] brake head assly, qty-20 nos., wt-120 kgs, srl no.[7] brake hanger lever end, qty-10 nos., wt-193 kgs, srl no.[8] miscellaneous (liners, pins, bushers, link, friction arm, fasteners, brake equalizer plate, washers, cotter pins, turnion clevis, arm spring, adjusting equipment, spacer, tie bar, equalizer, hanger inside & outside, nut bolt, safety sling, threaded bolt¿ etc.), wt-1000.80 kgs, approx. total ferrous weight-8007 kgs

CTN :45026699

05 Jun, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of modified brake hanger lever (rh) with gray paint. rdso drg no. skel - 4554 alt. - 2 ref-2&3 to 7 with gray paint. [ warranty period: 30 months after the date of delivery ]

CTN :44304993

29 Apr, 2026 82.50 Lacs

Visakhapatnam - Andhra Pradesh

Tender For bid to ras supply of plb pipe , 96 f optical fibre cable , dwc pipes , rcc chambers , rcc route joint indicators , plb push fit couplers , ujc 96f , ftb 96f , fdms sd type , pig tailssc pigtail , patch chords 20 mts sc to sc pig tail , insulation tapes , 20 mm hose pipe , cable ties tapes misc , causion tape , trenching cost based on the soil , pipe laying charge , cement concrete , cable pulling blowing , dwc laying charges , labour charges for testing and splicing , distribution of stores to routes , loading and unloading charges , unforeseen , coral make iris ivdx cloud server , coral make 192 port media gateway , ip phone model no grp 2604 , d link 10 100 1000 giga switch 24 port network , d-link cat 6 ethernet lan cable , d-link single plate io modules , d-link 3 mtrs length patch cards , 6-f ofc sm armored cable finolex make , dlink 4 u rack with accessories , cost of 40 mm plb duct for fibre laying , lc-lc fibre patch cards 3 mtrs length , d-link 12 u rack with accessories , digging of the cable trenchaning , ofc cable laying charges by using plb duct , ethernet lan cable laying charges , 100 pair fiber junction boxes with ge krone modules , 500- pair junction box with ge krone modules , jumper cable 500 mtrs each coil , beetel m500 cli with speaker analog telephone , server and gateway installation ) /bid number: gem/2026/b/7230191 * /dated: 03-03-2026 & & / bid document1 / 39

State Government

CTN :44539772

11 May, 2026 NA

Ukai - Gujarat

Tender For corrigendum : supply of various types lighting material for emd-iii-common, colony electrical maint. & electrical fuel section at gsecl ukai tps. (emd-iii (common) et-6227) - industrial exhaust fan 1 phase 230 v, size: 305 mm,900 rpm suitable for heavy duty having minimum sound, ring mounted to give maximum volume under free air flow., cg make,bracket type wall mounted fan,230volt,ac,50hz,sweep-450mm( 18 inch ),oscillating & tilting type, industrial wall mounted fan 1ph, pedestal fan, size 450mm (18-inch) ,rpm-1440,1-phase,3-speed, 230 volt,100 watt with regulator., heavy duty industrial pedestal fan with regulator, 1-phase,230 v ac, sweep: 450 mm, totally metal body., industrial wall mounted fan, sweep-750 mm, voltage - 230 v ac, 3 cx1.5 sqmm flexible copper conductor 1100 v, copper flexible wire 3 cx2.5 sqmm ,1.1 kv, flexible unsheathed pvc insulated copper cable of size 4 corex6 sqmm, 1.1kv,multi stranded anealed tinned copper,epr insulated,extruded pcp sheath flexible cable size 4cx4 sqmm, pvc twin wire 2.5mm sqr., ictpn switch 415 volts,200 amp. t.p. heavy duty., ictp switch 415 volts,100 amp. t.p. heavy duty., led tube light fixture 4 ft long 18/20 watt., mcb single pole 6 amp., elcb+mcb 32 amp,30 ma, 4-pole (3 + n) 240/415 v, 50 hz, miniature circuit breaker 3 - pole, 32 a, 415 v, rccb,240/415v ac, 63 amp, 4 pole, sens:30ma ,mounting- din rail, mcbs(3 pole+nutral) miniature circuit breker current rating 63amp., ring spanner set model 1812 taparia make, fix spanner size 6x7 mm to 30x32 mm jhalani make, tubular spanner set (8 pcs ) product no ts 08 taparia make, taparia combination plier, product no.1621-8,210 mm, crimping tools, capacity: 6 mm2 to 50 mm2., crimping tools capacity: 10 mm2 to 185 mm2., wooden lighting board with elcb+mcb, 5 pin switch socket, control fuse, flexible cable, industrial top etc as per detail specification, 2 switch + 2 plug wooden board with top sunmica, lighting panel with 18 outgoing c.k.t., supplied with double door, insulated busbar, insulated neutral bars, earth bar, cable ties, circuit identification lables, modular type 16/20 amp 1-way swich,240 volt, 5 / 6 ampere modular switch, 230 volts, 50 hz., switch socket combined 6 & 16 amp.anchor make, 6/16a uni.socket code -4191, 15 / 16 ampere modular socket, 230 volts, 50 hz., plug socket 6 amp 230v,5 hole, led lamp 9 watt, 230v, elmex terminal connector 35 sqmm type cst-35, indication led lamp 25.5 mm dia. 110v ac, 0.5w, red with lvgp, smc junction box : dimension (outside-mm) 730 x 510 x 220, dimension (inside-mm) 700 x 480 x 200, make : sintex, pvc adhesive insulation tape roll, ht tap roll, wolf make air blower, bosch make hot air gun model ghg 630 dce power input: 2000 watts, temprature range: 50-630 degree c, air flow rate: 150/300/5001/min, weight: 0.73kgs, digital multimeter, industrial exhaust fan 1 phase 230 v, size: 305 mm,900 rpm suitable for heavy duty having minimum sound, ring mounted to give maximum volume under free air flow., digital clamp meter, cg make,bracket type wall mounted fan,230volt,ac,50hz,sweep-450mm( 18 inch ),oscillating & tilting type, industrial wall mounted fan 1ph, pedestal fan, size 450mm (18-inch) ,rpm-1440,1-phase,3-speed, 230 volt,100 watt with regulator., heavy duty industrial pedestal fan with regulator, 1-phase,230 v ac, sweep: 450 mm, totally metal body., industrial wall mounted fan, sweep-750 mm, voltage - 230 v ac, 3 cx1.5 sqmm flexible copper conductor 1100 v, copper flexible wire 3 cx2.5 sqmm ,1.1 kv, flexible unsheathed pvc insulated copper cable of size 4 corex6 sqmm, 1.1kv,multi stranded anealed tinned copper,epr insulated,extruded pcp sheath flexible cable size 4cx4 sqmm, pvc twin wire 2.5mm sqr., ictpn switch 415 volts,200 amp. t.p. heavy duty., ictp switch 415 volts,100 amp. t.p. heavy duty., led tube light fixture 4 ft long 18/20 watt., mcb single pole 6 amp., elcb+mcb 32 amp,30 ma, 4-pole (3 + n) 240/415 v, 50 hz, miniature circuit breaker 3 - pole, 32 a, 415 v, rccb,240/

Brake Hanger Lever Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

State Government