Get complete information related to latest Brake Support Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Brake Support Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Brake Support Tenders.
Tender For mr-n-24-25- jhajha-01 (kiyajori to jogiyatilha) - kiyajori to jogiyatilha clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 100 m as per technical specification clause 303.1., for 100 m lead @ 80 %, for 100 m lead @ 20 %, construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per technical specification clause 405., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of dry lean concrete sub base over a prepared sub grade with coarse and fine aggregate conforming to is 383 , the size of coarse agg. not exceeding 25mm , agg. cememt ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 , cement content not to be less than 150kg/cm, opc to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant , trasported to site, laid with a paver with electronic sensor , compacting with 8-10 tonnes vibrartory roller, finishing and curing., construction of panel concrete ,plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per caluse 1501.2.2 m 30(grade) coarse and fine aggregates conforming to is:383, maximum s
Tender For mr-n/24-25 sasaram-02/01 - l068-t05 to panrwa (vr37), clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material(grade 2) : construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., water bound macadam with stone screening gr-ii : providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per technical specification clause 405., water bound macadam gr iii : providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.2 to 0.25 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of panel concrete ,plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per caluse 1501.2.2 m 30(grade) coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a concrete mixer of not less than 0.2 cum capasity and appropriate weigh batcher using approved mix design ,laid in approved fixed side formwork (steel channel,laying and fixing of 125 micron thick polythene film,wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continous operation including provision of contraction and expansion ,construction joints, ap
Tender For supply of brakesupport as per drg.no. lw03245 alt-c and specification no. 17.358 100 08, 17.358 105 01 and each 10th piece of the series production shall be subjected to radiog raphic test in addition to 100% magnetic particle/ liquid penetrant inspection and mdst- 153 rev. 01., packing instruction - pi042 ver-1.0 [ warranty period: 30 months after the date of deli very ]
Tender For supply of artificial limbs to district disable welfare office udupi. - below elbow myoelectric hand or equivalent model-, below elbow mechanical hand or equivalent model-, below elbow cosmetic hand or equivalent model-, above elbow myoelectric hand or equivalent model-, above elbow mechanical hand or equivalent model-, above elbow cosmetic hand or equivalent model-, kafo with modified ring lock knee joint without ankle joint or equivalent model-, afo with camber axis ankle joint or equivalent model-, afo with oklahoma ankle joint or equivalent model-, afo with tamarack ankle joint or equivalent model-, afo without ankle joint or equivalent model-, above knee prosthesis with pneumatic knee with carbon foot or equivalent model-, above knee prosthesis with suction socket, knee joint and esprit foot or equivalent model-, above knee prosthesis with 4 bar pneumatic knee with esprit foot or equivalent model-, above knee prosthesis with suction socket, knee joint and multiflex foot or equivalent model-, above knee prosthesis with suction socket, polycentric mechanical(a4) knee joint & esprit foot or equivalent model-, above knee prosthesis with laminated socket polycentric mechanical(a4) knee joint & multiflex foot or equivalent model-, above knee prosthesis with pp suction socket, polycentric mechanical(a4) knee joint & multiflex foot or equivalent model-, above knee prosthesis with suction socket, polycentric mechanical(a4) knee joint & single axis foot or equivalent model-, above knee prosthesis with suction socket, op2 knee joint & ranger foot or equivalent model-, above knee prosthesis with suction socket, trot knee joint & ranger foot or equivalent model-, above knee prosthesis with suction socket, single axis knee joint & ranger foot or equivalent model-, above knee prosthesis with pp socket, polycentric four bar mechanical knee joint & sach foot or equivalent model-, below knee prosthesis with silicone socket & echelon vt or equivalent model-, below knee prosthesis with silicone socket & echelon or equivalent model-, below knee prosthesis with silicone socket & echelon vac or equivalent model-, below knee prosthesis with silicone socket & elite vt or equivalent model-, below knee prosthesis with silicone socket & blade xt or equivalent model-, below knee prosthesis with silicone socket & elite blade or equivalent model-, below knee prosthesis with silicone socket & avolon foot or equivalent model-, below knee prosthesis with silicone socket & elite foot or equivalent model-, below knee prosthesis with silicone socket & epirus foot or equivalent model-, below knee prosthesis with silicone socket & esprit foot or equivalent model-, below knee prosthesis with silicone socket & navigator foot or equivalent model-, below knee prosthesis with silicone socket & multiflex foot or equivalent model-, below knee prosthesis with silicone socket & ranger foot or equivalent model-, below knee prosthesis with silicone socket & single axis foot or equivalent model-, below knee prosthesis with single axis foot or equivalent model-, below knee aqualimb or equivalent model-, below knee prosthesis with sach foot or equivalent model-
Tender For corrigendum : providing & laying road binding material at top of bund for all ash dyke at wtps. - supplying of hard murrum 50mm to 150mm sizeas directed by eic, spreading blindage or road crust and levelling togradient and camber as directed (i) hard murrum/road crust, rolling and consolidating water bound macadam(except laterite and kankar) including watering notexceeding 150mm thickness (main layer includingbinding materials) including filling in depressionswhich occur during the process.(a) with powerroller exceeding 8 tonne and not exceeding 12tonne.
Tender For repair of cc floorig i/l tiles pullies pr/fx of man holes cover frames road gully cover frames pr/lg of pipes and const of road gully camber in diffrent areas of ward no 10 to 17
Tender For repair of c.c floorig, i/l tiles, pullies, pr/fx of man holes cover frames, road gully cover frames, pr./lg of pipes and construction of road gully camber in diffrent areas of ward no. 1 to 9
Tender For supply of laboratory equipments /laptop/printer - flash chromatography system model a1700x-200ml yamazen carporation, japan make, programmable elution modes: isocratic step, linear & rf gradient, pumping flow rate: 5-200 ml/min, maximum pressure: 1.5 mpa (15 bar/217 psi), no. of solvents: use up to 4 solvents in a gradient, uv detection: dual variable wavelength pda uv vis, detector 200-800 nm,uv detector sensitivity: 0.02-10.24 saufs, fractionation modes: time manual, peak, peak& slope (valley)02, automated densitometer with 4 reading channelsmake- genaxy/thistle/cleaverdensitometer a universal densitometer scanner with software capable of reading 144test per min. is available for band quantitation following post electrophoresis staining ordering information-cell as gel application packages equipped with bridges applicator and clinical test kit, 1x4 -specimen semi micro applicator volume applied sample band with compatible strip size: 5.7x14cm, cell as gel wet membrane bridges and densitometer, 1x8.5 cm bridge for 1x5.7x7x14cm or 2x2.5x14cm cell as gel. strip cat no. cslbg8.55 terbo scan software densitometer (excludes computer and scanner) cat no. csldens flat belt scanner for turbo scan software cat no. csscan, uv transilluminatormake- genaxy/thistle/cleaverresearch model: 312nm single wavelength transilluminator for detection of more than 0.1 ng of dna filter area (cm) uv 20 x 20cm , analytical balance make- aczet/radwag/sartoriuscapacity :220gm readability : 0.1mg repairability: 0.2mg response time: 2-3 sec pan size : 90mm display: lcd backlite calibration : motorized internal calibration, probe sonicator (touch screen) with sound proof enclosure make-labman/aczet/sonic temperature indicator and controller touchscreen display - 4.3 inches tft user password protection available microprocessor controlled and completely programmable. large lcd display with time setting. auto-tuning for convenience and optimal processing efficiency. variable power output control. auto frequency tracking output amplitude 0-100% adjustment. automatic fault alarm. frequency 20-25khz-automatic tracking process capacity 0.5-500ml (approx.) probe dia (titanium alloy) standard 6mm (1/4") display 4.3 inches tft display function temperature, power, time, etc. temperature range( c) 0-99 c timer (selectable) yes overload protection yes user password protection available input method touch screen control, data memory 20 groups output power 6.5-650w (adjustable) power supply : ac 220v/50hz, pulveriser/grinder make-ideal/mac/amccommercial dry grinder are used for grinding different types of products like spices, fresh ginger, salt, sugar, leaves, herbal products, cattle and poultry feeds, icing sugar, custard powder, instant food, food colors and allied food production. 3 hp motor deluxe model camber size: 10 x 5 cm. capacity: 20-25kg./hr., decoction apparatus gas operated decoction making machinemake-ideal/mac/amcvessel capacity: 15 liters for 1 to 5 lit production capacity, motor: /1 hp single phase motor fuel: lpg (fitted with i no. burners) all contact parts in 304 grade stainless steel complete structure in mild steel ready to use with all standard accessories wi s.s. bucket 10 ltr., s.s. mesh, & s.s. round tank, cooling centrifuge make-remi/eppendrof/thermo programable compensation for true sample temperature: yes pre cooling: yes acceleration profiles: 9 deceleration profiles: 9 & coasting fast spin: yes display: lcd control communication: digital parameters setting switches: bi-directional encoder brushless motor with frequency drive: yes inverter fault detection with auto shut down: yes cfc free refrigeration system: yes no. of programs: 99 last set parameters recall: yes choice of rpm/ref setting: rpm/rcf digital countdown timer 0-99 min & continuous run: yes automatic rotor identification: yes emergency lid lock release: yes password protection: yes gas hinge to prevent door falling: yes imbalance detection with centrifugatio