Latest brass stop cock Tenders | Government brass stop cock Tenders

CTN :45678974

15 Jul, 2026 NA

Bardhaman - West Bengal

Tender For supply of square nose coal shovel , rotary portable cutter machine 230v , safety belt , pvc heavy duty suction discharge helical water hose , coupler for helical hose 3 inch , grinding wheel rough 40mm x 200mm , rubber spray hose , pvc tarpaulin size , hessian cloth , vulcanising rubber tape , chaser holde set 4 pc , chaser die threading for m 20 chaser machine , chaser die plaining for m 20 chaser machine , chaser vice bench for m 20 chaser machine , twist drill bit 13 by16 inch , twist drill bit 22 mm , white metal rc 3 , safety belt full body harness

State Government

CTN :45675988

02 Jul, 2026 34.13 Lacs

Bengaluru - Karnataka

Tender For annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to c & d type, varada block & arkaavathi block, koramangala, bengaluru from august-2026 to july-2027- item description: cleaning of water storage tank or sump by following method: (1) empty the tank/ sump and make it to near dry, (2) apply bleaching powder uniformally (@ tank capacity x 0.5 gms/litre) inside the tank/ sump and wait for one hour, (3) after one hour, clean/ rinse the tank/ sump with fresh water. repeat the process (2) & (3) for two to three times, all complete, as directed by the engineer-in-charge. , item description: cleaning of under ground sump, over head r.c.c. tank ( independent staging) including disposal of slit and rubbish, all as per direction of engineer-in-charge. the cleaning shall consist following operations:- tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. chlorination of rcc internal surface by liquid chlorine. the treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. finally the surface shall be treated with ultraviolet radiation etc. as per direction of engineer-in-charge. , item description: external sweeping and terrace cleaning - cleaning of outer periphery like roads footpaths curb stones terrace including removing grass dust etc., to the nearest garbage pit using suitable coconut broomstic,bombay broomstick, squezers /wipers /rubberbru , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc. - 20 mm nominal dia pipes , item description: providing pvc ringtite pipes conforming to is 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of pvc pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per iss (contractor will make his own arrangements for procuring water for testing) etc. complete for: pvc pipes 110mm dia., 6 kg/sqcm & class 3 , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc. - 25 mm nominal dia pipes , item description: providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : rectangular shape 453x357 mm , item description: providing and fixing brass stop cock of approved quality : 15 mm nominal bore , item description: providing and fixing unpl

State Government

CTN :45676047

02 Jul, 2026 36.58 Lacs

Bengaluru - Karnataka

Tender For annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to krishna block, national games village, koramangala, bengaluru from august-2026 to july-2027 (reserved for sc)- item description: external sweeping and terrace cleaning - cleaning of outer periphery like roads footpaths curb stones terrace including removing grass dust etc., to the nearest garbage pit using suitable coconut broomstic,bombay broomstick, squezers /wipers /rubberbru , item description: cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of engineer-in-charge. (the old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ rs. 0.10 per litre) (if during cleaning any gi fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) , item description: cleaning of under ground sump, over head r.c.c. tank ( independent staging) including disposal of slit and rubbish, all as per direction of engineer-in-charge. the cleaning shall consist following operations:- tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. chlorination of rcc internal surface by liquid chlorine. the treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. finally the surface shall be treated with ultraviolet radiation etc. as per direction of engineer-in-charge. , item description: cleaning of sewer line by rodding equipment for dia above 150 mm.(while cleaning septic tank all safety and precautionary measures to be taken,standard operating procedure to be adopted and pemsr act 2013 to be strictly followed). , item description: providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. , item description: providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. , item description: providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete , item description: providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. , item description: providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.75x40x2.5 mm (ordinary type) , item description: providing and fixing isi marked oxidised m.s. handles conforming to is:4992 with necessary screws etc. complete : 75mm , item description: providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. - 50mm , item description: providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc complete as per directions of engineer- in-charge , item description: providing and fixing brass stop cock of approved quality : 15 mm nominal bore , item description: providing and fixing brass full way valve gate with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore , item description: providing and fixing brass full

State Government

CTN :45676048

02 Jul, 2026 36.57 Lacs

Bengaluru - Karnataka

Tender For annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to sharavathi block, national games vilalge, koramangala, bengaluru from august-2026 to july-2027 (reserved for cat-iia)- item description: providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. , item description: providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. , item description: providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. , item description: providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.75x40x2.5 mm (ordinary type) , item description: providing and fixing isi marked oxidised m.s. tower bolt black finish, (bar- rel type) with necessary screws etc. complete : , item description: providing and fixing isi marked oxidised m.s. handles conforming to is:4992 with necessary screws etc. complete : 75mm , item description: providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. - 50mm , item description: providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc complete as per directions of engineer- in-charge , item description: providing and fixing brass stop cock of approved quality : 15 mm nominal bore , item description: providing and fixing brass full way valve gate with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore , item description: providing and fixing unplasticised pvc connection pipe with brass unions : 30 cm length - 15 mm nominal bore , item description: providing and fixing c.p. brass shower rose with 15 or 20 mm inlet : 100 mm diameter , item description: providing and fixing c.p. brass bib cock of approved quality conforming to is:8931 , item description: providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 g. , item description: providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 , item description: providing and fixing pillar cock made of stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - premium , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. internal work - exposed on wall - 20 mm nominal dia pipes , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. internal work - exposed on wall - 25 mm nominal dia pipes , item description: providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests , ite

corporations/Associations/Others

CTN :45516735

25 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For corrigendum : tender for supply of various types of tools - parallel shank twist drill 155 mm 15:5321 hs jobber series hes t/s t/orill 25mm centre drill pilot dia lemmx4 t/s adjustable reamer 25/12 25/12 t/s adjustable reamer 23/11 25/32" hss parallel shank end mill cutter cia 28mm. threading die chaser mex-215 drill chuck with key capacityd-15mm parallel shank twist drill 10 parallel shank twist drill 1.7mm parallel shank twist drill 18 parallel shank twist drill 20 parallel shank twist drill 2.4 mm parallel shank twist drill 2.5 parallel shank twist drill 10 parallel shank twist drill 12 parallel shank twist drill 13 mm parallel shank twist drill 15 parallel shank twist drillet parallel shank twist drill-40 parallel shank twist drill-4.2 parallel shank twist drill 4.5 parallel shank twist drill 5.0 parallel shank twist drill 57 parallel shank twist drillss parallel shank twist drill 1.0 parallel shank twist drill parallel shank twist drilles mm parallel shank twist drilles parallel shank twist drill 7.0 parallel shank twist drill75 parallel shank twist drillo parallel shank twist drills parallel shank twist drillet parallel shank twist drill hiss parallel shank twist drel 7.2 mm specification -7.2mm overall length-100 mm, flute length 60mm technical se hss parallel shank twist drielle4 mm specification diameter-1.4 mm overall length-117 mm, flute langth: 75 mm. technical spe his parallel shank twist drell & mm specification diameter-4.9 mm overall length-125 mm. flute length-1mm technical spe

State Government

CTN :45570018

22 Jun, 2026 NA

Ranchi - Jharkhand

Tender For government of jharkhand through its public works department (pwd) is engaged in framing / revision of schedule of rates and as part of this endeavor, quotations through e-tender are invited for rate of items / materials annexed as annexure-1- polythene water storage tank of mark (e.g sintex/sinter/himgiri/gangotietc)with cover and locking system, hdpe pipes 75mm dia, hdpe pipes 90mm dia, gi pipe 50 mm dia (tata or equivalent make), jute, g.m. ferrules, (i) 8 mm dia wt. not less than 400 gms, (ii) 10 mm dia wt. not less than 400 gms, (iii) 15 mm dia wt. not less than 400 gms, (iv) 20 mm dia wt. not less than 600 gms, (v) 25 mm dia wt. not less than 900 gms, stop cocks, (i) 15 mm brass stop cock wt. not less than 300 gms, (ii) 20 mm brass stop cock wt. not less than 400 gms, (iii) 25 mm brass stop cock wt. not less than 575 gms, (iv) 32 mm brass stop cock wt. not less than 850 gms, (v) 40 mm brass stop cock wt. not less than 1.15 kg, (vi) 50 mm brass stop cock wt. not less than 2.15 kg, (vii) 15 mm dia c.i. body brass working part stop cock., (viii) 20 mm dia c.i. body brass working part stop cock., (ix) 25 mm dia c.i. body brass working part stop cock., g.m. full way valve, (i) 15 mm dia wt. not less than 300 gms without wheel, (ii) 20 mm dia wt. not less than 400 gms without wheel, (iii) 25 mm dia wt. not less than 500 gms without wheel, (iv) 32 mm dia wt. not less than 700 gms without wheel, (v) 40 mm dia wt. not less than 1.0 kg without wheel, (vi) 50 mm dia wt. not less than 1.4 kg without wheel, (vii) 65 mm dia wt. not less than 1.8 kg without wheel, (viii) 80 mm dia wt. not less than 2.5 kg without wheel, g.m. non return valve verticle, (i) 15 mm dia wt. not less than 150 gms, (ii) 20 mm dia wt. not less than 250 gms, (iii) 25 mm dia wt. not less than 375 gms, (iv) 32 mm dia wt. not less than 600 gms, (v) 40 mm dia wt. not less than 700 gms, (vi) 50 mm dia wt. not less than 1.0 kg, (vii) 65 mm dia wt. not less than 1.20 kg, (viii) 80 mm dia wt. not less than 1.50 kg, (ix) 100 mm dia wt. not less than 1.80 kg, g.m. non return valve horizontal, (i) 15 mm dia wt. not less than 150 gms, (ii) 20 mm dia wt. not less than 250 gms, (iii) 25 mm dia wt. not less than 375 gms, (iv) 32 mm dia wt. not less than 600 gms, (v) 40 mm dia wt. not less than 700 gms, (vi) 50 mm dia wt. not less than 1.0 kg, (vii) 65 mm dia wt. not less than 1.20 kg, (viii) 80 mm dia wt. not less than 1.50 kg, (ix) 100 mm dia wt. not less than 1.80 kg, cocks, (i) 15 mm dia g.m. bib cock wt. not less than 300 gms, (ii) 15 mm dia brass bib cock wt. not less than 400 gms, (iii) 15 mm dia c.i. bib cock wt. not less than 400 gms, (iv) 15 mm dia c.i. body brass working part spray painted bib cock wt. not less than 400 gms, (v) 15 mm dia c.i. brass pillar cock cock wt. not less than 400 gms, (vi) 15 mm c.i. plug cock ordinary, (vii) 15 mm c.i. push cock ordinary, chromium plated brass fittings, (i) c.p. shower rose 100 mm dia, (ii) c.p. shower rose 125 mm dia, (iii) p.v.c. shower rose 150 mm dia, (iv) p.v.c shower rose 125 mm dia, connection pipe, (i) 15 mm dia x 30 cm. long lead connection pipe with brass fittings., (ii) 15 mm dia x 45 cm. long lead connection pipe with brass fittings., (iii) 15 mm dia x 30 cm. long pvc connection pipe with brass fittings., (iv) 15 mm dia x 45 cm. long pvc connection pipe with brass fittings., g.i. fittings (conforming to i.s. - 1879 ) isi marked, [a] g.i. bend, (i) 15 mm, (ii) 20 mm

Central Government/Public Sector

CTN :45318754

22 Jun, 2026 21.75 Lacs

Gaya - Bihar

Tender For corrigendum : supply of plumbing spare parts - cpvc 20mm pipe , cpvc 20mm elbow , cpvc 20mm tee , cpvc 20mm socket , cpvc 20mm half bend , cpvc 20mm cross tee , cpvc 20mm pass over bend , cpvc 20x15 brass elbow , cpvc 20x15 brass tee , cpvc 20x15 fta , cpvc 20x15 mta , cpvc 20mm cross tee , cpvc bush reduce 25x20 , cpvc 25mm pipe , cpvc 25mm elbow , cpvc 25mm tee , cpvc 25mm soket , cpvc 25mm half bend , cpvc 25mm cross tee , cpvc 25mm pass over bend , cpvc 20mm concealed , cpvc 25mm concealed , cpvc solvent 200ml , sedal 20mm pvc , sedal 25mm pvc , cpvc concealed valve stop cock 20mm , black cement , soap disk holder , soap disk holder , brass pillar cock , brass long body , brass shawer , brass 2x1 bib cock , brass washing machine tape , brass angel cock , brass stop cock 15mm , brass stop cock 20mm , brass gate valve 15mm , brass gate valve 20mm , brass gate valve 25mm , brass gate valve 32mm , brass gate valve 40mm , brass gate valve 50mm , health faucet nikil crome , brass waste coupling , ss sink coupling , ss waste pipe crome , gyser connection pipe , basin fashnner , braket fashner , brass and steel chrome bottal trap , brass sink mixcer non telephonic chrome , brass and steel chrome finish swan neck tap sink , hex nipple bit nipple , 90mm screw plus gutty , extention nipple 4 inch , extention nipple 3.5 inch , extention nipple 3 inch , extension nipple 2.5 inch , extention nipple 2 inch , brass spindal long body , brass spindal angle cock , conshiled spindal long , conshiled spindal long , 110mm ss cut jali , 110mm ss gratting jali , ss sink 22x24 , ss sink jali coupling , brass ro valve , brass nrv 25mm , brass nrv 32mm , brass nrv 40 mm , brass nrv 50 mm , brass nrv 65 mm , brass nrv 90 mm , brass nrv 110mm , brass ball valle 25mm , brass ball valve 32mm , brass ball valve 40mm , brass ball valve 50mm , water storage tank 2000 litter , water storage tank 500 litter , taflon tap water tek , ptmt pvc west pipe , ptmt pvc connection pipe 24 inch , ptmt pvc connection pipe 36 inch , water cooler connecting pipe 36 inch , 3m flexible pvc waste drain pipe 32mm , 3m flexible pvc waste drain pipe 40mm , ptmt pvc long body , ptmt pvc angel cock , ptmt pvc shawer , ptmt pvc healthfucet , ptmt pvc swan nec basin tap , wash basin 18x14x5 , counter mounted wash basin , wall hanging commode with cover , tank cover 24 inch , tank cover 36 inch , 25mm garden pipe 30metre , wc bolt fashner breaket , silicon , standard epoxy adhesive 500g , kohler 1327958 sp sensor assembly , kohler 1353114 sp sensor assembly , kohler 1327962 sp battery pack assembly , kohler 1150400 sp battery box assembly , kohler 1327931 sp solenoid valve assembly , kohler 1284859 flush valve , kohler 1278582 fill valve 3l and 6l , kohler spindal angel cock , kohler spindal piller cock , kohler cistern flushing plate , kohler diverter nobe , kohler wall hanging commode fashnner , kohler diverter handle , kohler diverter plate , kohler cistern saifan set , kohler conshiled spindal for urinal , kohler urinal p trap pvc , kohler 1115768 sp assy solenoid , kohler 1191986 0 hinge assembly left ok , kohler 1191987 0 hinge assembly right ok , kohler 1141995 hardewre pack , kohler tap opnner key , sluice valve 4inch , sluicevalve 6inch , 110mm pvc pipe , 110mm pvc elbow , 110mm pvc tee , 110mm pvc soket , 110mm pvc half bend , 110mm pvc y tee , 110mm pvc nahani trap , 110mm pvc p trap , 200mm swr pvc sewer pipe , pvc solvent 237ml , 90mm pvc pipe , 65mm pvc ball valve , 50mm pvc ball valve , 40mm pvc ball valve , 32mm pvc ball valve , 110mm pvc d joint , 90mm pvc d joint , hdpe d joint 110mm , hdpe flange 110mm , hdpe d joint 90mm , hdpe flange 90mm , hdpe butter fly valve 110mm , hdpe butter fly valve 90mm , hdpe butter fly valve 75mm , hdpe butter fly valve 65mm , hdpe butter fly valve 50mm , hdpe pipe 110 mm , hdpe pipe 90 mm , hdpe pipe 65mm , hdpe pipe 50mm , hdpe pipe 40mm , hdpe pipe 32mm , hdpe pipe 25 mm

CTN :45505916

01 Jul, 2026 NA

Bardhaman - West Bengal

Tender For supply of 14 inch cutting saw blade rotary , canvas fire fighting hose size 3 inch , pvc heavy duty suction discharge helical water hose , coupler type hydraulic connection , chaser die head complete for m 20 chaser machine , synthetic grey paint 4 liter pack , turpentine oil , canvas air duct 24 dia , g i wire netting mesh , sensitive earth leakage relay , unslacked lime packed in 40 kg hdpe bag

Central Government/Public Sector

CTN :45494565

10 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of high speed steel (hss) tangential chaser dies 4 inch x 1 1/4 inch x 11 tpi bspt, die set consisting of 4 nos. material to be certified by govt approved metrological lab make:ttc/emerson/nbeson. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45394107

10 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For corrigendum : supply of high speed steel (hss) tangential chaser dies 4 inch x 1 1/4 inch x 11 tpi bspt, die set consisting of 4 nos. material to be certified by govt approved metrological lab make:ttc/emerson/nbeson. [ warranty period: 30 months after the date of delivery ] ]

Brass Stop Cock Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors