Latest brass cage scrap Tenders | Government brass cage scrap Tenders

Central Government / Public Sector

CTN :45146143

19 May, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12265ms26b, 98050011, quantity- 41.295 mts. scrap condemned unserviceable ms bed plates, water tanks and water tank cut pieces, ms path plates, foot path plates, sheets, bin cut parts, rack and roller path, air tank cover parts, striker casting wear plates, sliding doors, swing doors, flap doors, ms chequered plates, expansion tank parts, ms plates, plate cuttings, wagon doors, dsl engine long hood, dummy bogie cut parts, cast iron surface plates and base plates, axle counter ms frames, baking oven cut pieces, ocb duct, welding machine outer body, inverter empty body, tap changer ms spares and empty body, manipulator, shaping machine ms body, ms gates, collapsible gates, base plate, short hood cabin cut parts, tables, racks, lavatory chute brackets, ms travelling base, ms danger boards, radiator ms spares, ms die blocks, ms body of radiator fan motor, capacitor ms body, auxiliary transformer ms empty body, ducts, dust bin stand, ht load brake switch body, ms transformer body, ventilator motor frames, transformer top plate, air receiver, storage box cut parts, coach body parts, dust bins, lockers, cattle guard, incinerator chimney parts, incinerator oven, incinerator cut parts, boxes, wagon doors cut pieces, wagon bfr end plates and cut pieces, ms fuel tanks [fire prone], boiler tank cut pieces, angles, girder, sheets cut pieces, pipe bending machine, lathe machine parts, transformer lifting trolley, lifting stands cut pieces, wagon damaged body sheet, floor sheets, pillar type jcb crane dismantled parts, loco lifting tackle assembly cut pieces, portable, jmb duct, stands, channels, fabricated structures, grinding machine body cut pieces cutting crane for utv, and other corroded heavy melting scrap of different thickness of sorts and sizes, with or without attachments. note- 1. gas cutting permitted for the purpose of loading only. 2. it is the responsibility of the purchaser to ensure that fuel tanks to be filled with water and cleaned thoroughly free from flammable substances before cutting to avoid explosion or any casualties. 3. private crane permitted for loading. special note- gas cutting for fuel tank should be done in open area [cutting must be kept clear and free of flammables] and away from bins [free from recognized hazards that are causing or are likely to cause serious harm] and should follow fire-prevention and fire-protection measures. location- [bin no- 265, left side of road no- 2]. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only. special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery as per mv act 1988

Central Government/Public Sector

CTN :45135457

13 Jun, 2026 NA

Kumarghat - Tripura

Tender For auction sale of machineries, electric industrial, non-electric industrial, general scrap/disposables, metallic, non-metallic, others, useable vehicles, lube / waste oil - disposal of the scrap materials 5 mva, 132/33 kv two winding transformer with off load tap changer at powergrid kumarghat substation

Central Government/Public Sector

CTN :45125922

18 May, 2026 NA

Kalyan - Maharashtra

Tender For auction sale of rolling stock - condemned electric loco no. wcam/3 no- 21936, with iron, steel along with all types of ferrous and non-ferrous materials along with waste. r/items - nil items removed for departmental use: 1). smoothing reactor (sl-30) = 02 nos., 2). ba frame (ctf, reverser, copper busbar, l1- to l6 contractor, c-145, shunting contactor, copper pipe, rs1&2 = 02 nos., 3) transformer with tap changer, radiator & etc = 01 no., 4) rps = 01 no., 5) inhibited tfp oil., 6) aux machines = 09 nos., 7) spares of siv. remark: 1. electric loco is sold on as is where is basis along with wheel sets and trolleys. 2. lot no is painted on the loco. 3. lot is sold on number basis. 4. approach road is available up to the lot. 5. cutting is allowed for easy loading. 6.loco is at present placed in kalyan els yard behind auxiliary section in the custody of sse/store/trs/els/kalyan and at the time of handing over loco will be placed on suitable cutting line at els/kalyan. 7. stock holder will be fully responsible for any addition, deletion, alteration, and variation after joint inspection report. 8. purchaser has to personally visit the site and see the lot. no claim will be entertained after sale of lot. 9. purchaser has to keep fire safety equipment/items i.e. water/sand/fire extinguisher etc. at the cutting site. 10. lot is ok for sale on above observations. note:- purchaser should ensure to clean the cutting line premises of scrap loco before final delivery. qty : 01 number. location : lying at els/kyn stock holder : sse/store/els/trs/kyn

CTN :45083165

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - p.l. no.98057054.scrap melting gr-d consisting of cutting sol bar, fall plate, head stock, cutting outside panel, celling fan down rod, wagon door & body cutting part, driver seat assly., trough floor, electrode holder, cab window assly. psycostyle machine, trolley, plate cutting, angle cutting, iron axle with pipe, cover of tail light head light flasher etc, tie bar fencing, pipe cutting, structure cutting, cut pieces of rod, damage emu door, lubricating felt assembly frame, mvmt,tmb,emu,mvsi impeller,mvsi duct, air duct, fan chamber, electrical pillar box, compression spring of bk cylinder, inter/after cooler tube type, lid of grease drums, partition frame, cattle guard, ms base, l.t. panel box ferrous, , tap changer, expanded metal, vsb packing, bs door, iron window, ms rod , fire extinguisher, gate, nut , bolt, washer, wick felt carriers, pin, angle frame with or without net, r.s. joint, ms iron plate, angle, door shutter, cutting chain, net box, fencing wire and such materials fit for melting gr-d, except p-way materials such as rail, fish plate and non ferrous etc. note-some items are attached with negligible quantity of ss.qty-135mt.location-north of link road, east of inner boundary wall. condition-two days advance cutting is allowed for loading purpose only.

Central Government/Public Sector

CTN :45087022

13 May, 2026 NA

Chennai - Tamil Nadu

Tender For auction sale of others - pvc scrap consisting of materials such as 1] pvc door shutters (damaged) - 286 nos, , 2] pvc water tank 500 litres capacity - 4 nos, 3] pvc tap 15 mm - 81 nos, 4] pvc pillar tap - 6 nos, 5] pvc water tank 1000 litres capacity - 13 nos, 6] pvc water tank 1500 litres capacity - 1 no., 7] pvc water tank 2000 litres capacity - 5 nos, and pvc scrap with/without minor ferrous attachments as is where is basis. [released/condmened] - total qty : 4.800 mt. custodian : sr. section engineer/works/nagercoil, location : inside old and new office compound of sse- works-nagercoil [ncj]., s.1539 no. 593532 dtd.10.10.2025, note- delivery to be made on actual weighment basis. special conditions - 1] segregation is not permitted. 2] jurisdiction- the courts in chennai alone shall have exclusive jurisdiction in the matters/ disputes arising out of the contract/ arbitration/ conciliation proceedings and the place of arbitration/ conciliation, if any, shall be in chennai only., 3) forfeiture of bsv payment along with emd - in southern railway bsv partly paid along with emd will be forfeited, if full payment is not received in stipulated time, with interest if any applicable. 4) part delivery-part delivery is not permitted against part payment on southern railway., nfs/side assets : - 1] materials such as ms, stainless steel, gi pipes if any available nearby to be taken as nfs., 2] any other items identified other than items in the description, the same shall be handed over to custodian. [pl no. 98417265, hsn code : 39153090, gst : 5% on fcm], item : actual weighment pvc items. [image attached].

Central Government/Public Sector

CTN :45008556

04 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of others - scrap fe & n/fe (1)compresor off size, 110no, fe-935kg, cu-66kg(2)nrv 6"/4", 2no, fe-6kg (3)timer, 24no, fe-0.48kg (4)capacitor 2.5 mfd to 120 mfd, 668no, pvc-13.36kg (5)current transformer,9no, fe-36kg, cu-9kg (6)condensor coil, 15no, fe-3.75kg, cu-3.75kg, al-1.50kg (7)expansion valve, 14no, cu-1.40kg (8)fan blade, 79no, fe-31.60kg, al-3.95kg (9)db box/dp switch, 17no, fe-1.70kg (10)mccb/icptn/off size, 59no, fe-11.80kg, cu-.295kg (11)power pack, 1no, fe-.10kg (12)5 in 1 socket 5 amp, 38no, cu-0.19kg (13)sealed dome compresor, 84no, fe-252kg, cu-33.60kg (14)fan motor of indoor unit, 49no, fe-12.25kg, al-4.90kg (15)condensor fan motor, 139no, fe-69.50kg, cu-27.80kg (16)geyser element, 9no, cu-0.45kg (17)over load relay, 67no, fe-0.67kg, cu-0.335kg (18)volt meter, 16no, fe-0.08kg, cu- .032kg, al- .08kg (19)water cooled condensor, 3no, fe-9kg, cu- .30kg, al- .30kg (20)front grill, 3no, pvc- .60kg (21)fitting off size, 1941no, fe-970.50kg (22)wall fan off size, 123no, fe-270.60kg, cu-18.45kg (23)glow sign board, 30no, fe-90kg (24)tik w board off size, 63no, wood-15.75kg (25)acb off size, 9no, fe-193.50kg, cu-9kg (26)ms angle/gi structure, 1no, fe-468kg (27)v bracket, 20no, fe-80kg (28)insulator scrap broken, 1363no, nil (29)energy meter, 1724no, fe-43.10kg, cu-17.24kg (30)scrap wood ,1no, wood- 587kg (31)pvc alumn. wire, 80.7 m, al-40.350kg, (32)pedestal fan ,99no, fe-99kg, cu-9.90kg, al-4.95kg (33) geyser off size, 56no, fe-448kg, cu-5.6kg, al-11.2kg (34)stabilizer, 10no, fe-120kg, cu-25kg (35) insect killer, 21no, fe-73.50kg, cu-1.05kg (36)cls panel 63 amp.,17no, fe-595kg, cu-49.81kg (37) main switch /mcb/mccb, 688no, fe-66.80kg , cu-13.36kg (38)heater (plastic),1no, fe-0.20kg (39) exhaust fan off size, 294no, fe-588kg, cu-44.10kg, al-14.7kg (40)lv/hv side bushing, 5no, cu-0.50kg (41)tap changer switch ,4no, fe-0.40kg, cu-0.1kg (42) power capaciter ,2no, fe-1kg (43)street light controller ,5no, fe-10kg (44) led lamp scrap,629no, al-3.145kg (45)released horizontal siren ,2no, fe-74kg, cu-6kg (46) air circulator fan ,41no, fe-205kg, cu-6kg (47) scrap tyer , 18no (48) led tube released , 2187no, al-2.187kg (49) ups, 2nos, fe-6kg, cu-0.2kg, al-0.02kg (50) ocb ,2no, fe-150kg, cu-15kg, al-2.5kg (51) thermostate ,48no, fe-4.80kg (52) capacitor off size , 193no, cu-0.965kg (53) blower drum ,40no, fe-8kg (54) pvc cut size copper wire, 470m., cu-0.5kg (55) pvc insulated copper wire , 145kg, cu-95kg (56) combination piler ,3no, fe-0.75kg (57) clamp meter ,1no, cu-0.005kg (58) fan regulator , 6no, cu- .012kg (59) cappilery (copper tube) ,6no, cu-0.06kg , (60) empty drum ,27no, fe-486kg (61) 1 core alumn. cable, 840m, al-40kg (62)lighting arrester,1no, fe-1kg (63) vaccume interueptor, 3no, fe-0.30kg (64)outdoor type isolater ,1no, fe-40kg (65) compressor off size ,69no, fe-172.5kg, cu--17.25kg (66) pcb kit , 10no (67)single phase preventor ,63no, fe-3.15kg, cu-1.26kg (68) (a)outdoor fitting off size,1670 no, fe-501kg, al-1002kg, (b)fitting outdoor,280 no, fe-700kg, cu-14kg, al-42kg (69)switch socket ,21no, cu-0.105kg (70)controller switch, 1no, fe-0.05kg (71) electronic chok, 23no, fe-1.15kg, al-0.115kg (1-71) lot no-5 (1-71)location-sse/ph/store/ddu

Central Government/Public Sector

CTN :45000768

04 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - 98080106: cond. & u/s. ms/ci/gi item scrap consisting of signal items, ground connection, lock rod, point machine parts, loco parts, gears, slide cover, cams, beaters, bars, ms rod/angle /channel/pipe cut piece, bm box, pipe fittings, screw couplings, coupling hook, signal three aspects, signal two aspects, cast iron components, pressure tank, augers, dip lorry, ms trolly, tension rod, plate, large pipe,signal post, fastners, pick axe, beaters, crow bars, lever, train coach door broken parts, ms stand, weighing set, motor case, compressor case, compressor valve, ms tank, nut, bolt, tool box, ci linked pots, chain, damper, l c gate parts and tap, valve, gear case, flat rod, rottery key, grill, pulley, air filter, fencing, hood, boiler tube, winch wheel, steel rope, ladder, battery boxes, frames, ms boxes, ring, ci foundation ct boxes, loco liner, buffer, buffer case, buffer plunger,icf buffer complete set, piston, piston cylinder, connecting rod, signal posts ,bearing case, tension rod, cam shaft,ms cut pieces,pipes, pump case, pta parts,shock absorber,e type lock,d bracket,axle box housing,end shield,cast iron component,trolly parts, hyd scissors table,air suspension system, pipe,ladder, pantograph parts, ms hood tap and such other similar signal,cut pieces of mast, loco and c&w items with or without non ferrous and other attachments as is where is condition. note: (1) if any non- ferrous items found in loose in the location to be handed over to custodian at the time of delivery, (2) crane/jcb loading permitted (3) cutting permitted to loadable size at the time of delivery. 4).material available in first location have to be removed first. location: in two locotion:1)b-2 and w-48,below camera of scrap yard/ssd/ptj.

Central Government/Public Sector

CTN :44942576

28 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. and u/s ferrous fabricated materials of ms/ci scrap in nature such as weld mesh, ms duct, anti slip arrangement, earthen bond, galvanized (gi) sheet, ms sheet of various sorts and sizes, blower rotary forging, liner, guide fixtures, side frame fixtures, trolley of various sorts and sizes, trolley wheel & frame, battery fixing iron tray, ms pipe, coach/wagon stand, conveyor belt, ferrous body of auto change over panel, wire mesh, emu coach cut parts, ferrous portion of cab window assembly, sign on iron stand, salary bin, cupboard, structural items, different type of packing channels, trolley, lat, coach cut up parts, head stock, ms tank, grill gate, rolling shutter,wheel with plate, bins,regulator empty box, sliding doors, dolley, fob fencing, corrugated sheets, rectangular square tube &galvanised sheets, bogie mounted brake beam,brake blocks, gi sheets, pipe,square &rectangular tubes,stair case and handle,ferrous body of various types of motor, angle and channel fabricated with nut, bolt with or without brick and concrete,ladder,plate,grill, barricade, bolts, nuts, tray under frame, cut rod, rails of various sorts and sizes with/without concrete/brick/mud adhering,cut rails or rails used in support structures, coach head stock, coach parts,battery tray, ladder, all types of trolley wheels with minor nfs attachments, screens, channel post, sheets, stand, track machine cut up parts, ms pipes covered with or without rope &with or without parts of rubber, dome, vrla rack, vcb in dismantled condition, vrla battery box & clamp, stand, dtmf way station equipment box, led line display board, hydraulic lifting table with available fittings, vrla battery empty container, bed/base plate, fabricated cut rods,gi pipes, ci pipes and fittings, ms plate, roofsheets, angle, plate, platform bench, spring plank, clamps, cabinet, ms grill, sheets, ladder, steel gate, trolley,ms water tank, fire tender tank,roof truss supporting columns,purlins, sand box, fencing, tl rod, vcb panel, train display board, battery stand, boards, tools box, empty regulator &empty battery container, cut rod, ticket punching cut parts, hand rail, fabricated post/pipe/rod, strips, hoods, impellor, base plates, meshes, battery box frame, grs box, control panel, fan down rod, ac window covers ,angle / channels with/without rails, angle of tld, rack, lt panels, ferrous electrical panel boxes,i beam,transmission rods,fissure plates, main switch panel board w/o nfs attachments, ebc & rbc frame &enclosure,emu sliding door, high beam, silencer, , garden light post, tap changer cover with fiber attachments, empty battery container, stretcher, cupboard, dust bin, iron step, empty rotary junction box, empty regulator box, iron metal box, air reserviour compressor cylinder of varous sorts & sizes, garden light post, stand, mdb w/o non ferrous attachments, st light tubular post, gi/ms window, luggage rack, ,bed portion of weighing scale l with or without any minor non-ferrous attachments and all other scrap excluding ms hand hold in fabricated nature of sorts and sizes full/broken with/without other fs/ci/gi fittings in as is where is condition.pl no 98050126. note:(1) cutting is permitted to loadable size and for heavy nature items only. 2) during delivery if any major non-ferrous items found the same may be handed over to custodian. 3) jcb/crane loading permitted. location: behind a row bin 3&4

CTN :44867531

21 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - p.l. no. 98057054. scrap melting gr-d consisting of cutting sol bar, fall plate, head stock, cutting outside panel, celling fan down rod, wagon door & body cutting part, driver seat assly. trough floor, electrode holder, cab window assly. psychostyle machine, trolley, plate cutting, angle cutting, iron axle with pipe, cover of tail light head light flasher etc. tie bar fencing, pipe cutting, structure cutting, cut pieces of rod, damage emu door, lubricating felt assembly frame, mvmt,tmb,emu, mvsi impeller, mvsi duct, air duct, fan chamber, electrical pillar box, compression spring of bk cylinder, inter/after cooler tube type, lid of grease drums, partition frame, cattle guard, ms base, l.t. panel box ferrous, , tap changer, expanded metal, vsb packing, bs door, iron window, ms rod , fire extinguisher, gate, nut , bolt, washer, wick felt carriers, pin, angle frame with or without net, r.s. joint, ms iron plate, angle, door shutter, cutting chain, net box, fencing wire and such materials fit for melting gr-d, except p-way materials such as rail, fish plate and non ferrous etc. note-some items are attached with negligible quantity of ss. qty-205mt.location-south of link road, east of j. t. road. condition-two day¿s advance cutting is allowed for loading purpose only.

CTN :44867553

21 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot non ferrous scrap - p.l no: 98230013.scrap aluminium ingot in pieces consisting of scrap aluminium pipe, ladder, han blade, reflector, gear box, aluminium wire, aluminium feeder wire, lamp shed, air filter, window frame, stick, dj controller, tap changer, cylinder c3w,c2w, air flow, air dryer, anti-wind clamp, dirt collector, air filter frame for lhb coaches, spare parts of prv, g-21 coil head, parts of wiper motor, hpit fittings, cylinder of emu/memu tap changer & swgr, pulley atd wheel, steady arm, 3 pulley wheel, hat sink of led tube light, bus bar, roof bar, and miscellaneous aluminium parts. qty- 4000 kg. location- vm godown-3. custodians lot no. 03/09/april/2026-27/03. n.b: loading of the materials will be performed by railway labourar. weighment will be executed by electronics weight scale at vm godown-3.

Brass Cage Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector