Latest brass foil Tenders | Government brass foil Tenders

Central Government/Public Sector

CTN :45555698

10 Jul, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of foot operated valve for water taps for lhb ac-3t economy coaches. as per drg.no. 01/fov/pryj-24 specn: cast brass as per dcb 2 grade of is:1264. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45555916

24 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of ford cup no. b4 (orifice dia 3.970+/-0.015) to check the consistency/viscosity of paints and related products. the cup shall be made of brass along with calibration certificate . a suitable standard stand to hold ford cup no.b4 along with spirit level (preferably circular type) with calibration certificate to spirit level & electronic digital stop watch (1/100 second) with calibration certificate . make: ksc/ erichsen /byk or similar, specification no: is: 101/1988 part i, sec 5 amendment. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45555901

22 Jun, 2026 NA

Bhusawal - Maharashtra

Tender For supply of complete set of bus-bar dt 1/250 for 6531 /7475 /7775 kva of 3-phase loco main transformer (metal part only) make/ brand: hvepl, hirect, bhel, cgl, abb. one set consists of 06 items 10 numbers. (1) copper stud qty./set 01 no. (2) brass nut qty./set 04 nos. (3) brass bush qty./set 01 no. (4) brass flat washer qty./set 02 nos. (5) brass taper washer qty./set 01 no. (6) m.s. spring washer qty./set 01 no. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45550818

06 Jul, 2026 NA

Harnaut - Bihar

Tender For supply of a set of metal threaded end fitting of size pg 29 of annexure a (table a 2 item no 6) with hexagonal lock nut of nickel plated brass thread size pg 29(table a10 item no.6) with gasket and o ring conforming to rdso specification no. rdso/pe/spec/ac-0138-2009(rev-1).all are in assembled condition. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45561033

01 Jul, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of electrolytic tinned copper ring tongue terminal ends insulated with metal reinforcement for solderless crimping to copper conductor of size 2.5 sq.mm, stud hole width 5.2 mm, palm width 10 mm equivalent to chetna part no. ccrm -7456 confirmingto is 1897. make acceptable : ascon, brass copper, chetna, kamalesh, venus, yamuna. oem or authorized dealers only to quote with documentary evidence [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45567199

25 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of straight metric metal thread end fitting suitable to conduit size nw 23 thread having thread size m25 x 1.5 with hexagonal metric lock nut made of nickel plated brass of size m25 x 1.5 with suitable o-ring and washer confirming to rdso specification no. rdso/pe/spec/ac/0138 -2009 (rev.1) [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45546916

16 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of fully insulated brass casted body electrode holder 600 amps type-a weight of complete holder-with insulation 500 grams +/- 05% and with out 400 grams +/- 05 % asper is:2641/1989 or latest" [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45549717

23 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of fitting straight connector 8mm tube, 1/4" inch designed for pressurised flushing system make: spac item code spac.0010997, make: spac or equivalent means it should be functionally compatible inpressurised flushing system. spac: mmdts 19027 rev-3. material elbow: plastic; muffler:brass; straight connector: metal body plastic collar; tube: pu or nylon as required. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45532362

03 Jul, 2026 45.00 Lacs

Bhuj - Gujarat

Tender For certain repair to water supply distribution lines and other connected items at mil stn bhuj and gandhidham under ge (a) bhuj - taking up u/s ci /di/ac water main (incl all fitting) with spigot & socket /ms pipe or any other type of pipe or lead joint incl burning out joint & recovering lead from pipe of 400 mm bore for laying /rerouting of serviceable pipe after cleaning complete all as specified and as directed., all as per item 1 above but 250 mm dia bore complete all as specified and as directed., all as per item 1 above but 200 mm dia bore complete all as specified and as directed., all as per item 1 above but 150 mm dia bore complete all as specified and as directed., all as per item 1 above but 100 mm dia bore complete all as specified and as directed., material and labour di pipes of size 400 mm bore with spigot and socket end centrifugally cast class "k- 9" , in any length laid in trenches/on surface/ over masonary pillar and connection to old or new position complete all as specified and as directed., all as per item 6 above but 250 mm dia bore complete all as specified and as directed., all as per item 6 above but 200 mm dia bore complete all as specified and as directed., all as per item 6 above but 150 mm dia bore complete all as specified and as directed., all as per item 6 above but 100 mm dia bore complete all as specified and as directed., material and labour di pipes of size 200 mm bore with spigot and socket end centrifugally cast class "k- 7" , in any length laid in trenches/on surface/ over masonary pillar and connection to old or new position complete all as specified and as directed., all as per item 11 above but 150 mm dia bore complete all as specified and as directed., all as per item 11 above but 100 mm dia bore complete all as specified and as directed., m&l di bend any type radius and angle tapers any type straght bend increacing decreacing or double socket etc) tee pipe single branch y juction double branch cross(all socket and spiogat collars caps and plug for the pipe socket & spiogat of the following size 250 upto 400 mm dia complete all as specified and as directed., all as per item 13 above but upto 80 to 200 mm bore complete all as specified and as directed., m&l for run laid laid joint for ci pipe of size 100 mm bore complete all as specified and as directed., m&l for run laid laid joint for ci pipe of size 150/200 mm bore complete all as specified and as directed., m&l for ruber gas ket joint/ tyton joint for ci / di pipe of size 250 to 400 mm bore complete all as specified and as directed., m&l for ruber gas ket joint/ tyton joint for ci / di pipe of size 80 to 200 mm bore complete all as specified and as directed., taking down carefully cast iron sluice valve of size 250 mm bore from ci water mains, dismantling parts and reassembling, replacement of brass spindle for sluice valve, class pn 1.0, and repacking stuffing box of sluice valve spindle, refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc complete all as specified and as directed., taking down carefully cast iron sluice valve of size 200 mm bore from ci water mains, dismantling parts and reassembling, replacement of brass spindle for sluice valve, class pn 1.0, and repacking stuffing box of sluice valve spindle, refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc complete all as specified and as directed., taking down carefully cast iron sluice valve of size 150 mm bore from ci water mains, dismantling parts and reassembling, replacement of brass spindle for sluice valve, class pn 1.0, and repacking stuffing box of sluice valve spindle, refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc complete all as specified and as directed., taking down carefully cast iron sluice valve of size 100 mm bore from ci water mains, dismantling parts and reassembling, replacement of brass s

Central Government And Public Sector

CTN :45391510

09 Jul, 2026 NA

Nagpur - Maharashtra

Tender For corrigendum : bearing, part no. 6207-2rsr-c3. cage material: brass/steel. internal clearance: c3. make: plasser, koyo, skf, fag. warranty: 6 months from the date of supply [ warranty period: 6 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ] ]

Brass Foil Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors