Latest brass frame Tenders | Government brass frame Tenders

State Government

CTN :40236737

22 May, 2025 1.61 Crore

Ajmer - Rajasthan

Tender For package no rj-01-03/north/2023-24 - name of road :construction of cc road in ward no. 14 diggi to pannigram chowk, dismantling upto 1.5m in foundation and/or 1.5m above ground level including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material, and stacking serviceable material within a lead of 1000m. [morth specification clause 202] concrete cement concerte plain 1:2:4 mix and precast cement concerte blocks., carrige of earth, sand, gravel, u/s kankar, lime, flyash, morrum, manure or sludge. including loading unloading 5 km lead, providing and laying mechanically mixed and vibrated cement concrete in foundation upto a depth of 1.5 metres below ground level and 1.50 metres above ground/bed level as per morth specification : clause 1000 & 1700 p.c.c. 1:3:6 mix with crushed stone aggregate 20 mm nominal size., construction of un-reinforced, dowel jointed, plain cement concrete pavement m-30, over a prepared sub- base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrance, sealant primer, joint sealant, debonding strip, admixtures as approved, curing compound, finishing to lines and grades as per drawing complete as permorth specification clause 602., p& f mukhya mantri sadak yojana logo for roads funded by state road fund having m.s. definition plate of 1.6mm thickness frame to steel hollow dsection of 75mm x 75mm, 2.5m long stove enamelled paint with hold fast including paint logo as per approved design and colours. the logo shall be made out of 1.6mm thick circular plate fix on 1200mm x 150mm rectangular steel base plate 1.6mm thick, the base of circular shall be plain at the junction of base plate. the size of definition plate shall be 1500x600mm and embedding the posts by m-15 mix c.c. block 300x300x600 mm including lettering / writing and painting etc. complete in all respect, construction of pedestal of size 5.50 x 5.50 x 1.25 in stone masonary in cm 1:6 as per design and drawing complete with 25 mm thick plaster in cm 1:4 plaster and weather coat paint, supply & fixing of one side polished black granite stone 20 mm thick of size 3 x 2 with engraved and gold colour painted letter ( upto 200 letter) & border as per direction of engineer in charge on existing pedestals including transportation, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes (is 15778 : 2007 code) having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings, this included jointing of pipes & fittings with one step cpvc solvent cement , trenching refilling & testing of joints complete as per direction of engineer in charge.(external work).15 mm nominal size, name of road :construction of cc road in ward no 69 pirmithatas gajmal gali, dismantling upto 1.5m in foundation and/or 1.5m above ground level including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material, and stacking serviceable material within a lead of 1000m. [morth specification clause 202] concrete cement concerte plain 1:2:4 mix and precast cement concerte blocks., carrige of earth, sand, gravel, u/s kankar, lime, flyash, morrum, manure or sludge. including loading unloading 5 km lead, providing and laying mechanically mixed and vibrated cement concrete in foundation upto a depth of 1.5 metres below ground level and 1.50 metres above ground/bed level as per morth specification : clause 1000 & 1700 p.c.c. 1:3:6 mix with crushed stone aggregate 20 mm nominal size., construction of un-reinforced, dowel

CTN :40231769

26 May, 2025 NA

Howrah - West Bengal

Tender For supply of coat hook for vande bharat as per technical specification of dolphy india pvt. ltd. part no. d tpr00034 or m/s. essco (jaquar group) model no. aec-chr-1161n (double coat hook). note : (1) material : brass with chrome finish, (2) make / brand : dolphy india pvt. ltd. or jaquar only. (the standardization of l avatory fittings/amenities as per icf letter no. md/trainset/rb contract/ 186g , date : 06-01-2024 as copy enclosed). [ warranty period: 30 months after the date of delivery ]

CTN :40218961

13 May, 2025 31.06 Lacs

Multi City - Karnataka

Tender For procurement of lab equipments for quality control lab of no.2 q c subdivision gorur - supply, installation, testing and commissioning digital thermometer range -50 to 280 deg c , item code aim-9622 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning specific gravity bottle- 50ml, item code mis-401 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning environmental test chamber eco friendly with cooling temperature range-10c to 60c +-1c, humidity-50% to 95% + -4%, double walled, inner chamber ss 304, digital controller cum indicator, size - 610x610x610mm, item codeaim-9878 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning mould, steel, for 70.6mm cube-for preparation of mortar and lime cubes, item code aim-414 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning vibration machine, with built-in digital timer, nabl calibrated - as per is4031, machine is supplied with one cube mould with isi certification mark and poking rod. suitable for operation on 220v, 50hz, single phase, ac supply. item codeaim-418-2 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning core cutter - ref. standard is2720 (part 29) , core cutterof known volume is driven into the soil by a rammer. the core cutter is dug out, trimmed and the soil inside weighed and dried for moisture and density check. the equipment consists of the following replaceable partsrammer, with steel rod item codeaim-161 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning core cutter - ref. standard is2720 (part 29) , core cutterof known volume is driven into the soil by a rammer. the core cutter is dug out, trimmed and the soil inside weighed and dried for moisture and density check. the equipment consists of the following replaceable parts steel dolly, 25mm high and 100mm dia item code aim-161 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning compaction test apparatus, manual light compaction made of mild steel- as per is 2720 (part 7) the construction quality control is essentially to check the density of compacted soil achieved in the field, thereby checking its strength. item code aim-110-ms with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning laboratory electric oven, with digital indicator cum controller with safety alarm, range 50 deg to 250 deg c +/-1 deg c with air circulating fan, s.s. inside size 600 x 900 x 450mm conforming to is 2720 item code aim-9109 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning specific gravity bottle-50ml conforming to is2386 item code mis-401 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 150 microns, item code aim-05322 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 160 microns, item codeaim-05339 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 180 microns, item code aim-05321 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testi

CTN :40218968

13 May, 2025 53.37 Lacs

Multi City - Karnataka

Tender For procurement of lab equipments for quality control lab of no 3 qc subdivision yediyur - supply, instalation, testing and commisioning core cutter - ref. standard is 2720 (part 29) , core cutter of known volume is driven into the soil by a rammer. the core cutter is dug out, trimmed and the soil inside weighed and dried for moisture and density check. aim-161 with all lead and lift complete as per direction of the engineer-in-charge of work., supply, installation, testing and commissioning sample tray (enamel tray), size 200x150x30mm with all lead and lift complete as per specification and direction of the engineer-in-charge of work., supply, installation, testing and commisioning sample tray (enamel tray), size 300x250x40mm with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, installation, testing and commisioning sample tray (enamel tray), size 450x300x40mm with all lead and lift complete as per specification and direction of the engineer-in-charge of work., supply, instalation, testing and commisioning sample tray (enamel tray), size 600x450x50mm with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply of sample tray (enamel tray), size 50x500x50mm with all lead and lift complete as per specification and direction of the engineer-in-charge of work., supply, instalation, testing and commissioning compaction test apparatus, manual light compaction made of mild steel-as per is 2720 (part 7) the construction quality control is essentially to check the density of compacted soil achieved in the field, there by checking its strength. aim-110-ms with all lead and lift complete as per specification and direction of the engineer-in-charge of work., supply, instalation, testing and comissioning speedy moisture meter, as per is2720 (part 2), is12175 range 0-25% (gauge div.0.5percent) with digital weighing balance. calcium carbide reagent, moisture gauge, 0-25% x 0.5%, digital balance, 50g, steel balls, 12.7mm dia and 25mm dia, scoop, cleaning brush, aluminum dish. item code aim-036-1 with all lead and lift complete as per specification and directions of the engineer-in-charge of work., suply, instalation, testing and comissioning micro oven with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, instalation, testing and comissioning laboratory electric oven with digital indicator cum controller with safety alarm, range 50deg to 250 deg c +/-1 deg c with air circulating fan, s.s. inside size 600 x 900 x 450mm item code aim-9109 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., supply, installation, testing and comisioning specific gravity bottle-100ml item code aim-401-1 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, installation, testing and comissioning specific gravity bottle-50ml item code aim-401 with all lead and lift complete as per specification and directions of the engineer-in-charge of work., suply, installation, testing and commissioning of sieve shaker, motorised, with built-in digital timer and 20cm and 30cm dia adaptor suitable for operation on 220v, 50hz, single phase, ac supply item code aim-054-1 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, installation, testing and comissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 1.6mm, item codeaim-05338 with all lead and lift complete as per directions of the engineer-in-charge of work., suply, installation, testing and comissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 1.70mm, item codeaim-05308 with all lead and lift complete as per directions of the engineer-in-charge of work., suply, installation, testing and comissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 2.00mm , item cod

CTN :40218973

13 May, 2025 34.46 Lacs

Channarayapatna - Karnataka

Tender For procurement of lab equipments for quality control lab of no.1 hrbhlc subdivision q.c channarayapatna - supply, installation, testing and commissioning specific gravity bottle-100ml conforming to is2386 mis-401-1 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 3.35mm , item code aim-05304 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 10mm , item code aim-05337 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning environmental test chamber eco friendly with cooling temperature range-10c to 60c +-1c, humidity-50% to 95% + -4%, double walled, inner chamber ss 304, digital controller cum indicator, size - 610x610x610mm, item code aim-9878 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning digital compression testing machine, capacity 1000kn, range 1000kn, least count 0.1kn, max.clearance between platens 390mm, 260mm, platen size 222.0 dia, piston dia 157mm, piston stroke 50mm, specimen size 100mm & 150mm cube, 100mm dia x 150mm dia cylinder, one electric motor, single phase 220v, 50hz, ac supply digital display, item code aim-314e-dg-1 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning vibration machine, with built-in digital timer, nabl calibrated - as per is4031, machine is supplied with one cube mould with isi certification mark and poking rod. suitable for operation on 220v, 50hz, single phase, ac supply. item code aim-418-2 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 90 microns, item code aim-05325 with all lead and lift complete as per directions of the engineer-in-charge of work. , supply, installation, testing and commissioning heating gloves item code aim-132 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation,testing and universal automatic compactor aim-11001-ms ,compaction mould 100mm id, 127.3mm height 1000ml volume,complete with collar and base plate, made of mild steel and aim-11101-ms - compaction mould 150mm id, 127.3mm height 2250ml volume, rammer - circular faced 50mm dia adjustable to 2.6kg or 4.9kg weight, drop - adjustable to 310mm or 450mm.with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation,testing and commissioning digital laboratory california bearing ratio test apparatus , as per is2720 (part xvi). suitable for operation on 220v, 50hz, single phase, ac supply,digital indicator. no of channels - 2 nos, load cell , capacity - 50 kn compression type, maximum overload -110% of the rated capacity, item code aim-121-4-ms with all lead and lift complete as per directions of the engineer-in-charge of work, supply, installation, testing and commissioning core cutter - ref. standard is2720 (part 29) , core cutterof known volume is driven into the soil by a rammer. the core cutter is dug out, trimmed and the soil inside weighed and dried for moisture and density check. replaceable parts steel dolly, 25mm high and 100mm dia item code aim-161 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning core cutter - ref. standard is 2720 (part 29) , core cutter of known volume is driven into the soil by a rammer. cylindrical core cutter, made of steel 100mm dia x 130mm long, steel dolly, 25mm high and 100mm dia rammer with steel rod item code aim-161 with al

CTN :40218946

13 May, 2025 58.87 Lacs

Tumkur - Karnataka

Tender For procurement of lab equipments for quality control lab of no.29, q.c subdivision tumkur - supply, installation, testing and commissioning laboratory electric oven with digital indicator cum controller with safety alarm, range 50deg to 250 deg c +/-1 deg c with air circulating fan, s.s. inside size 600 x 900 x 450mm item code aim-9109 with all lead and lift complete as per specifications and directions of the engineer-in-charge of work., supply, installation, testing and commissioning of sieve shaker, motorised, with built-in digital timer and 20cm and 30cm dia adaptor suitable for operation on 220v, 50hz, single phase, ac supply with all lead and lift complete as per specifications and directions of the engineer-in-charge of work., supply of mould, steel, for 70.6mm cube-for preparation of mortar and lime cubes, item code aim-414 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning core cutter machine with all accesories including generator with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning digital compression testing machine, capacity 1000kn, range 1000kn, least count 0.1kn, max.clearance between platens 390mm, max.distance between side plates 260mm, platen size 222.0 dia, piston dia 157mm, piston stroke 50mm, item code aim-314e-dg-1 with all lead and lift complete as per directions of the engineer-in-charge of work., supply of sieve brass frame 20cm dia x 90 microns with all lead and lift complete as per directions of the engineer-in-charge of work., supply of heating gloves with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning swell test apparatus as per is2720 (part 16).capacity 5kn, aim-11001-mould 100mm dia x 1276.3mm height (1000ml volume) with base plate and collar, aim-265 - proving ring, 2.5kn capacity, aim-072 dial gauge 25mm travel, 0.01mm least count, aim-13201, item code aim-132 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning centrifuge extractor, capacity 1500g electrically operated. the new design of centrifuge extractor is compact with inbuilt dimmerstat for speed veration from 0 rpm to 3600 rpm. suitable for operation on 220 v, 50 hz, single phase, ac supply. each unit is supplied complete with a set of 25 filter paper discs with all lead and lift complete as per specifications and directions of the engineer-in-charge of work., supply, installation, testing and commissioning thermometer ip 16c range 90c to +370c with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning thermometer ip 15c range 5c to +110c with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning ball valve 4mm item code aim-53302 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning cup 4mm item code aim-53301 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning thermometer, ip 61c item code aim-56111 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning thermometer, ip 60c item code aim-56110 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning ring and ball apparatus. the ring and ball apparatus is a compact user friendly apparatus. it has magnetic stirrer with heating facility and digital display of temperature, the heating can be adjusted through knob in aim 561-1 and can be controlled through the integral pid controlled in aim 561-2. suitable for ope

CTN :40201675

17 May, 2025 10.00 Lacs

Satna - Madhya Pradesh

Tender For supply of general material - general material, glass kanch ki pani ke liye year t10c, steel glass water, nastaa plate fiber mayur, plastic tray acrylic white, laopala quarter plate, laopala full plate, tee caustor, tee mug bharat goldline, room spray, tee thermos 500ml milton/cello make, tee thermos 1l milton/cello make, steel bottel 1 litre, copper bottel 1 litre, lock big size link make, lock medium size link make, lock big size simple haveay duty, lock medium size simple haveay duty, cell 1-5 volt aa size duracell, cell 1-5 volt aaa size duracell, cell 23a 12 volt, towel big size bombay dying make, towel small size bombay dying make, rangoli colour, ramraj geru, kapoor, mitti ke diya, rui batti, match box, rifine oil 15 litre cane, saal (loyi), sriphal, jholaa with chain, dettol handwash 100 ml, dettol handwash 200 ml, colin denote 1 litre, paper napkin, plastic mug one litre, odonil per box, cloth, cloth suti, air ballon 15x15 ft,including rope 100 mtr. writing, printing and hydrozen gas filling and instalation work, air ballon 10x10 ft,including rope 100 mtr. writing, printing and hydrozen gas filling and instalation work, air ballon 12x12 ft,including rope 100 mtr. writing, printing and hydrozen gas filling and instalation work, steel spoon (breakfast), fork steel spoon, glass stand trea (glass 06 no.), paper kite 15x15 inch, paper kite 18x18 inch, paper kite 24x24 inch, kite thred 400 meter, kite thred 900 meter, disposal paper glass (big size), disposal paper glass (medium size), dhaga latari (medium size), dhaga latari (small size), electric kettle (500 ml), electric kettle (1 liter), naming and numbering (painting) work on permanent properties installed in the office (per letter per cm height), momento/award/trophy normal size 28 inch, momento/award/trophy normal size 24 inch, momento/award/trophy normal size 22 inch, momento/award/trophy normal size 20 inch, momento/award/trophy normal size 18 inch, momento/award/trophy normal size 15 inch, momento/award/trophy normal size 12 inch, momento/award/trophy normal size 10 inch, momento/award/trophy normal size 8 inch, momento/award/trophy metal size 28 inch, momento/award/trophy metal size 24 inch, momento/award/trophy metal size 22 inch, momento/award/trophy metal size 20 inch, momento/award/trophy metal size 18 inch, momento/award/trophy metal size 15 inch, momento/award/trophy metal size 12 inch, momento/award/trophy metal size 10 inch, momento/award/trophy metal size 8 inch, brass/phool ki thali medium size, brass/phool ki thali big size

Central Government/Public Sector

CTN :40158795

28 May, 2025 79.00 Lacs

Bhopal - Madhya Pradesh

Tender For supply of geo technical engineering laboratory equipment - laboratory c.b.r. test apparatus - digital and computerized , soaking tank for cbr moulds , rapid moisture meter , automatic soil compaction machine , motorized sieve shaker , humidity chamber , beaker - 500 ml cap. , beaker- 1000 ml cap. , electronic balances - 5 kg , electronic balances 10 kg , sand pouring cylinder - small and large , is test sieves brass frame 20cm dia , is test sieves brass frame 30cm dia , digital microprocessor direct shear apparatus , automatic computer controlled digital tri-axial shear test app with pressure volume controller , and analysis software for cu, uu, cd test , laboratory oven with digital temperature , permeability -soil constant head and falling head , dynamic cone penetrometer , constant rate of strain consolidation testing , consolidation apparatus , liquid limit motorized, plastic limit, shrinkage limit , digital swell test apparatus , digital unconfined compression tester , infrared moisture meter

CTN :40170078

20 May, 2025 NA

Kolkata - West Bengal

Tender For supply of brass letter navy , metal plate for fixing brass letter , star chromium plated , pvc plate for star , star box rexine cover , brass indian navy emblem in pvc plate

CTN :40116437

07 May, 2025 7.50 Lacs

Madurai - Tamil Nadu

Tender For bussand old building,tamil brass letter and drain at ward-9 in alaganallur town panchayat

Brass Frame Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector