Get complete information related to latest Brass Stop Cock Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Brass Stop Cock Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Brass Stop Cock Tenders.
Tender For annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to c & d type, varada block & arkaavathi block, koramangala, bengaluru from august-2026 to july-2027- item description: cleaning of water storage tank or sump by following method: (1) empty the tank/ sump and make it to near dry, (2) apply bleaching powder uniformally (@ tank capacity x 0.5 gms/litre) inside the tank/ sump and wait for one hour, (3) after one hour, clean/ rinse the tank/ sump with fresh water. repeat the process (2) & (3) for two to three times, all complete, as directed by the engineer-in-charge. , item description: cleaning of under ground sump, over head r.c.c. tank ( independent staging) including disposal of slit and rubbish, all as per direction of engineer-in-charge. the cleaning shall consist following operations:- tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. chlorination of rcc internal surface by liquid chlorine. the treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. finally the surface shall be treated with ultraviolet radiation etc. as per direction of engineer-in-charge. , item description: external sweeping and terrace cleaning - cleaning of outer periphery like roads footpaths curb stones terrace including removing grass dust etc., to the nearest garbage pit using suitable coconut broomstic,bombay broomstick, squezers /wipers /rubberbru , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc. - 20 mm nominal dia pipes , item description: providing pvc ringtite pipes conforming to is 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of pvc pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per iss (contractor will make his own arrangements for procuring water for testing) etc. complete for: pvc pipes 110mm dia., 6 kg/sqcm & class 3 , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc. - 25 mm nominal dia pipes , item description: providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : rectangular shape 453x357 mm , item description: providing and fixing brassstopcock of approved quality : 15 mm nominal bore , item description: providing and fixing unpl
Tender For annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to krishna block, national games village, koramangala, bengaluru from august-2026 to july-2027 (reserved for sc)- item description: external sweeping and terrace cleaning - cleaning of outer periphery like roads footpaths curb stones terrace including removing grass dust etc., to the nearest garbage pit using suitable coconut broomstic,bombay broomstick, squezers /wipers /rubberbru , item description: cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of engineer-in-charge. (the old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ rs. 0.10 per litre) (if during cleaning any gi fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) , item description: cleaning of under ground sump, over head r.c.c. tank ( independent staging) including disposal of slit and rubbish, all as per direction of engineer-in-charge. the cleaning shall consist following operations:- tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. chlorination of rcc internal surface by liquid chlorine. the treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. finally the surface shall be treated with ultraviolet radiation etc. as per direction of engineer-in-charge. , item description: cleaning of sewer line by rodding equipment for dia above 150 mm.(while cleaning septic tank all safety and precautionary measures to be taken,standard operating procedure to be adopted and pemsr act 2013 to be strictly followed). , item description: providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. , item description: providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. , item description: providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete , item description: providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. , item description: providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.75x40x2.5 mm (ordinary type) , item description: providing and fixing isi marked oxidised m.s. handles conforming to is:4992 with necessary screws etc. complete : 75mm , item description: providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. - 50mm , item description: providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc complete as per directions of engineer- in-charge , item description: providing and fixing brassstopcock of approved quality : 15 mm nominal bore , item description: providing and fixing brass full way valve gate with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore , item description: providing and fixing brass full
Tender For annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to sharavathi block, national games vilalge, koramangala, bengaluru from august-2026 to july-2027 (reserved for cat-iia)- item description: providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. , item description: providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. , item description: providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. , item description: providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.75x40x2.5 mm (ordinary type) , item description: providing and fixing isi marked oxidised m.s. tower bolt black finish, (bar- rel type) with necessary screws etc. complete : , item description: providing and fixing isi marked oxidised m.s. handles conforming to is:4992 with necessary screws etc. complete : 75mm , item description: providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. - 50mm , item description: providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc complete as per directions of engineer- in-charge , item description: providing and fixing brassstopcock of approved quality : 15 mm nominal bore , item description: providing and fixing brass full way valve gate with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore , item description: providing and fixing unplasticised pvc connection pipe with brass unions : 30 cm length - 15 mm nominal bore , item description: providing and fixing c.p. brass shower rose with 15 or 20 mm inlet : 100 mm diameter , item description: providing and fixing c.p. brass bib cock of approved quality conforming to is:8931 , item description: providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 g. , item description: providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 , item description: providing and fixing pillar cock made of stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - premium , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. internal work - exposed on wall - 20 mm nominal dia pipes , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. internal work - exposed on wall - 25 mm nominal dia pipes , item description: providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests , ite
Tender For bid to ras corrigendum : supply of braided comma size 3to0comma 70to76 cm comma rb 1oblique2 circle needle 20to25 mm , nitrile non sterile gloves large l , sodium chloride solution isotonic in nontoxic disposable plastic bottle of 500ml ffs , desensitising tooth paste tube of 50 gm , lignocaine hcl jelly 2percent tube of 30 gm with sterile tube and short nozzle suitable for intra urethral use comma should be packed within a sterile blister pack , cavity liner calcium hydroxide based self cure radiopaque two paste system tube of not less than 10 gms , antiseptic mouth wash containing sodium fluoride and triclosan bott of 100to150ml , anticaries mouth rinse containing sodium fluoride bott of 100 ml , post extraction alveolar dressing material jar 10 gms , periodontal pack non eugenol two paste system of base and catalyst comma 90 gm each , abrasive mounted diamond fg round 1point8mm , abrasive mounted diamond fg inverted cone 1point8mm , abrasive mounted diamond fg cylindrical 1point2mm , hand piece lubricant spray bott of 500 ml to 600ml , articulating paper , patient bib comma plastic , calcium hydroxide with iodoform root canal dressing and filling paste in syringe of 2 to 4 gms , wax modelling base plate wax , inter dental brush pack of 05 , dental floss pack of 05 , suction cleaning solution bott of 1 ltr , cold mould seal , self cure acrylic powder pink shade bottle of 110 gm with rapid repair liquid 110 ml , self cure acrylic powder clear shade comma bottle of 110 gm with self cure acrylic liquid 110 ml , paste impression pkt of two tubes containing zno base125to165 gm and catalyst , crown and bridge plaster die stone super hard for pkt of 01 kg , flowable lighttocure composite kit complete of four syringes of 2 to 4 gm each with etchant and bonding , medicament root canal formocresol to bott of 10 to 15 ml , sol sodtohypochlorite 2percent for endodontic irrigation bott of 500ml , matrix retainer ss ivory pattern band for comma pkt of 12 for molars and premolars , outfit matrix ss siqveland bands narrow for , k files stainless steel size no 8 length 25 mm set of 6 , k files stainless steel size nopoint10 length 25 mm set of 6 , k files stainless steel length 25 mm size no 15to40 set of 6 , barbed broach set of 10to12 , rotary niti endodontic files with controlled memory size of 21 mm and 25 mm , dental mouth mirror top autoclavable scratch resistant rhodium coated size 4 , chlorhexidine gluconate 0point2percent wobliquev mouth wash , plastic wedges , diamond bur 1point0 , diamond bur 0point4 , gauze absorbent comma folded comma 2point5 cm x 100 metres , pad abdominal swab comma 40 x 25 cm with tape comma 30 cm , pad comma cotton wool comma dental comma box of 100 , rolls comma absorbent cotton dental comma assorted sizes in box of 500 , surgeons caps disposable , silk braided comma size 4to0comma 70to76 cm comma rb 1oblique2 circle needle 20to25 mm , silk braided comma size 4to0comma 70to76 cm comma rb 3oblique8 circle needle 12to16 mm , n 95 mask without expirator valve , nitrile non sterile gloves small s , nitrile non sterile gloves medium m , protective goggles reusable , hydrogen peroxide solution with stabilizer ip 20 volume 500 ml bott , diethyl ether solvent bott of 500 ml , lignocaine 100 mg and ethanol 28 percent vobliquev spray container of 500 ml , triamcinolone acetonide 0point1percent for oral usecomma tube of 5 gm , dextrose monohydrate for oral use , syringe disposable 50 ml , antiseptic oral pain relieving topical gel containing antiseptic and topical anaesthetic in gm or ml , bur tungsten carbide for straight hand piece 7mm , denture cleaner tablets pack of 30to40 //bid details 2 / 99 tablets , rubber base impression material kit with accessories , broach comma nerve canal barbed assorted size pkt of 12 , lining cavity composite cal hyd based photocure to prefilled syringe of 2to5 gm with applicator tips , h file stainless steel size no 15to40 comma length 21 mm set of 06 , regular oblique medium body el
Tender For government of jharkhand through its public works department (pwd) is engaged in framing / revision of schedule of rates and as part of this endeavor, quotations through e-tender are invited for rate of items / materials annexed as annexure-1- polythene water storage tank of mark (e.g sintex/sinter/himgiri/gangotietc)with cover and locking system, hdpe pipes 75mm dia, hdpe pipes 90mm dia, gi pipe 50 mm dia (tata or equivalent make), jute, g.m. ferrules, (i) 8 mm dia wt. not less than 400 gms, (ii) 10 mm dia wt. not less than 400 gms, (iii) 15 mm dia wt. not less than 400 gms, (iv) 20 mm dia wt. not less than 600 gms, (v) 25 mm dia wt. not less than 900 gms, stopcocks, (i) 15 mm brassstopcock wt. not less than 300 gms, (ii) 20 mm brassstopcock wt. not less than 400 gms, (iii) 25 mm brassstopcock wt. not less than 575 gms, (iv) 32 mm brassstopcock wt. not less than 850 gms, (v) 40 mm brassstopcock wt. not less than 1.15 kg, (vi) 50 mm brassstopcock wt. not less than 2.15 kg, (vii) 15 mm dia c.i. body brass working part stopcock., (viii) 20 mm dia c.i. body brass working part stopcock., (ix) 25 mm dia c.i. body brass working part stopcock., g.m. full way valve, (i) 15 mm dia wt. not less than 300 gms without wheel, (ii) 20 mm dia wt. not less than 400 gms without wheel, (iii) 25 mm dia wt. not less than 500 gms without wheel, (iv) 32 mm dia wt. not less than 700 gms without wheel, (v) 40 mm dia wt. not less than 1.0 kg without wheel, (vi) 50 mm dia wt. not less than 1.4 kg without wheel, (vii) 65 mm dia wt. not less than 1.8 kg without wheel, (viii) 80 mm dia wt. not less than 2.5 kg without wheel, g.m. non return valve verticle, (i) 15 mm dia wt. not less than 150 gms, (ii) 20 mm dia wt. not less than 250 gms, (iii) 25 mm dia wt. not less than 375 gms, (iv) 32 mm dia wt. not less than 600 gms, (v) 40 mm dia wt. not less than 700 gms, (vi) 50 mm dia wt. not less than 1.0 kg, (vii) 65 mm dia wt. not less than 1.20 kg, (viii) 80 mm dia wt. not less than 1.50 kg, (ix) 100 mm dia wt. not less than 1.80 kg, g.m. non return valve horizontal, (i) 15 mm dia wt. not less than 150 gms, (ii) 20 mm dia wt. not less than 250 gms, (iii) 25 mm dia wt. not less than 375 gms, (iv) 32 mm dia wt. not less than 600 gms, (v) 40 mm dia wt. not less than 700 gms, (vi) 50 mm dia wt. not less than 1.0 kg, (vii) 65 mm dia wt. not less than 1.20 kg, (viii) 80 mm dia wt. not less than 1.50 kg, (ix) 100 mm dia wt. not less than 1.80 kg, cocks, (i) 15 mm dia g.m. bib cock wt. not less than 300 gms, (ii) 15 mm dia brass bib cock wt. not less than 400 gms, (iii) 15 mm dia c.i. bib cock wt. not less than 400 gms, (iv) 15 mm dia c.i. body brass working part spray painted bib cock wt. not less than 400 gms, (v) 15 mm dia c.i. brass pillar cockcock wt. not less than 400 gms, (vi) 15 mm c.i. plug cock ordinary, (vii) 15 mm c.i. push cock ordinary, chromium plated brass fittings, (i) c.p. shower rose 100 mm dia, (ii) c.p. shower rose 125 mm dia, (iii) p.v.c. shower rose 150 mm dia, (iv) p.v.c shower rose 125 mm dia, connection pipe, (i) 15 mm dia x 30 cm. long lead connection pipe with brass fittings., (ii) 15 mm dia x 45 cm. long lead connection pipe with brass fittings., (iii) 15 mm dia x 30 cm. long pvc connection pipe with brass fittings., (iv) 15 mm dia x 45 cm. long pvc connection pipe with brass fittings., g.i. fittings (conforming to i.s. - 1879 ) isi marked, [a] g.i. bend, (i) 15 mm, (ii) 20 mm
Tender For carbide tipped brazed boring tool shank , carbide tipped brazed rh internal recessing tool , carbide tip brazed boring tool , iso 3 brazed external turning tool , hss tool bit with 10 percentage cobalt size , hss square tool bit s400 grade , brazed t.c tipped tools 156 1616 tool no tip p30 right , brazed t.c tipped tools 156 2525 tool no tip p30 right , brazed parting tools iso 7 r 150 1610 p30 grade , brazed parting off tools iso 7 3220 p30 grade , brazed t.c tipped tools 156 1010 tool no tip p30 right , brazed turning tool iso 2r 2525 tip c20, p30 grade , tap hand ground thread in metric coarse pitch and in set 3 pieces size m3x0.3 or 0.5mm , tap, hand ground thread in metric coarse pitch and in set 3 pieces , tap hand ground thread in metric coarse pitch and in set 3 pieces , inserts trow away spun120308 tn4000 , tin coated carbide turning insert cnmg , coated carbide tpkn1603pdr grade p30 p40 for milling hot die steel wu 20 pm , tungsten carbide inserts tpun 160304 grade , brazed tools turning to shoulder iso9 r1212 shank tip p30 , brazed tools-turning to shoulder iso 9 r1616 shank tip p30 as per annexure , brazed parting tool iso 7 25x16r grade k20 , dnmg150604 inserts , coated carbide insert for machining hardened die steel mat
Tender For supply of spare parts for dynisco usa make melt flow index testersas - display board lmi 5000 part no 4160 25 , die orifice removal tool part no 7050 84 , charging tool for mfi part no 7050 86 , cleaning tool for mfi part no 7050 90 , die orifice cleaner pin part no 7050 95 , barrel cleaning brush part no 7050 87 , barrel cleaning tool part no 7050 82 , tungsten carbide orifice part no 7050 47 , piston assembly dynisco part no 7050 42 , orifice brush dynisco part no 7050 31
Tender For bid to ras bid to ras supply of syringe hypodermic cartridge type needle 35 mm long presterlised disposable pkt of 100 , material impression alginate pkt in 300 to 500 gms , crown and bridge plaster die stone super hard for pkt of 01 kg , broach, nerve canal barbed assorted size pkt of 12 , bur, round tungsten carbide for fg 1.0 mm, pkt of 3 , cleaner pulp canal set of 6 reamers 21 mm length size 15-40, 45-80 , flowable light- cure composite kit complete of four syringes of 2-4 gm each with etchant and bonding , gutta percha points 2 percent set of 02 boxes of size 15 to 40 and 45 to 80 box of 120 , 4 percent, 6 percent gp points grater taper gp -pack of 120 , matrix retainer ss ivory pattern band for, pkt of 12 for molars and premolars , set of six hand niti tapered files 21mm length with corresponding gutta percha points and paper points-complete kit , set of six hand niti tapered files 25mm length with corresponding gutta percha points and paper points-complete kit , set of six rotary niti tapered files 21mm length with corresponding gutta percha points and paper points set complete , set of six rotary niti tapered files 25mm length with corresponding gutta percha points and paper points set complete , endodontic access burs-set of 06 , endodontic safe non cutting ended bur for access cavity, set of 2 , k files stainless steel length 25 mm size no 15-40 set of 6 , h file stainless steel size no 45-80, length 21 mm set of 06 , rotary niti endodontic files with controlled memory size of 21 mm and 25 mm , dental mouth mirror top autoclavable scratch resistant rhodium coated size 4 , chlorhexidine gluconate 0.2 percent wbyv mouth wash , cotton wool, absorbent, pkt of 500 gm , pad abdominal swab, 25 x 25 cm with tape, 30 cm , pad abdominal swab, 40 x 25 cm with tape, 30 cm , nitrile non sterile gloves small s , nitrile non sterile gloves medium m , nitrile non sterile gloves large l , nitrile non sterile gloves extra large xl //bid details 2 / 29