Latest brass strip Tenders | Government brass strip Tenders

Central Government/Public Sector

CTN :45555916

24 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of ford cup no. b4 (orifice dia 3.970+/-0.015) to check the consistency/viscosity of paints and related products. the cup shall be made of brass along with calibration certificate . a suitable standard stand to hold ford cup no.b4 along with spirit level (preferably circular type) with calibration certificate to spirit level & electronic digital stop watch (1/100 second) with calibration certificate . make: ksc/ erichsen /byk or similar, specification no: is: 101/1988 part i, sec 5 amendment. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45555698

10 Jul, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of foot operated valve for water taps for lhb ac-3t economy coaches. as per drg.no. 01/fov/pryj-24 specn: cast brass as per dcb 2 grade of is:1264. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45555901

22 Jun, 2026 NA

Bhusawal - Maharashtra

Tender For supply of complete set of bus-bar dt 1/250 for 6531 /7475 /7775 kva of 3-phase loco main transformer (metal part only) make/ brand: hvepl, hirect, bhel, cgl, abb. one set consists of 06 items 10 numbers. (1) copper stud qty./set 01 no. (2) brass nut qty./set 04 nos. (3) brass bush qty./set 01 no. (4) brass flat washer qty./set 02 nos. (5) brass taper washer qty./set 01 no. (6) m.s. spring washer qty./set 01 no. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45561033

01 Jul, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of electrolytic tinned copper ring tongue terminal ends insulated with metal reinforcement for solderless crimping to copper conductor of size 2.5 sq.mm, stud hole width 5.2 mm, palm width 10 mm equivalent to chetna part no. ccrm -7456 confirmingto is 1897. make acceptable : ascon, brass copper, chetna, kamalesh, venus, yamuna. oem or authorized dealers only to quote with documentary evidence [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45567199

25 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of straight metric metal thread end fitting suitable to conduit size nw 23 thread having thread size m25 x 1.5 with hexagonal metric lock nut made of nickel plated brass of size m25 x 1.5 with suitable o-ring and washer confirming to rdso specification no. rdso/pe/spec/ac/0138 -2009 (rev.1) [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45543381

23 Jun, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of brass-cuzn37a-profile profile to st24009 12x2 (hw- 426.22. 1.6) -- item as per specn. st24009 rev. 14 w

Central Government / Public Sector

CTN :45576101

22 Jun, 2026 NA

Tirupati - Andhra Pradesh

Tender For " supply of towel ring for lavatory of vb chair car coaches make: jaquar model: can-chr-1121n (or) make:m/s dolphy model: dtnr0001 material: brass with chromium finish. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45554261

29 Jun, 2026 NA

Seoni - Madhya Pradesh

Tender For supply of jalpraday samagri item - pvc pipe (3" heavy, 20 ft), pvc socket (3"), pvc elbow (3"), pvc tee (3"), pvc solvent (100g), pvc socket (6"), pvc elbow (6"), pvc tee (6"), black flange rubber gasket (6"), leather sheet, gi pipe (2", 20 ft), gi long socket (2"), gi nipple (2" - 0.5 ft, 1 ft, 1.5 ft, 2 ft, 2.5 ft, 3 ft), hacksaw frame (large), double-sided hacksaw blade, ci non-return valve (2"), ci check valve (3"), plastic tank valve (3"), ci tailpiece (3"), ci flange (2"), ci tailpiece (4"), ci tailpiece (6"), ci flange (3"), ci flange (6"), ci hose connector (3"), ci hose connector (4"), ci hose connector (6"), nylon rope (12/8), spindle rod (3", 4", 6"), gi union (3"), flange rubber washer (2", 3", 4"), raw rubber, electrical tape, gi elbow. 2-inch starter, 7.5 hp starter, 12.5 hp starter, 2 hp panel, 5 hp panel, 3-core copper cable (6 sq. mm), hdpe coupler, 7.5 hp submersible motor, 10.5 hp submersible motor, 12.5 hp submersible motor, 5 hp submersible motor, 2 hp submersible motor, 7.5 hp auto-switch, 10.5 hp auto-switch, 63 amp grip, 100 amp grip, 200 amp grip, fuse wire, 2-3 inch reducer, 3-4 inch reducer, 2-inch gi union, 4-inch gi union, 7 kg hammer drill machine, metal-cutting grinder machine, 1-inch upvc pipe, 1/2-inch upvc pipe, 3/4-inch upvc pipe, 1/2-inch upvc socket, 1/2-inch upvc elbow, 1/2-inch upvc tee, 1/2-inch upvc brass elbow, 1/2-inch upvc brass tee, 1/2-inch upvc cap, 3/4-inch upvc socket, 3/4-inch upvc elbow, 3/4-inch upvc tee, 3/4-inch upvc brass elbow, 3/4-inch upvc brass tee, 3/4-inch upvc cap, 1/2-inch plastic tap, no. 18 chain wrench, no. 12 chain wrench. no. 24 ring spanner, no. 36 ring spanner, ring spanner (21-23), ring spanner (18-19), ring spanner (16-17), open-end spanner (21-23), open-end spanner (18-19), open-end spanner (16-17), taparia screwdriver, large screwdriver, small screwdriver, ammeter, voltmeter, large iron shovel, small iron shovel, 18-inch plastic pan (tasla), double-sided iron pickaxe, large iron crowbar, wooden base, 21 kg breaker machine, grinder blade, nut-bolt (no. 21, 6-inch), nut-bolt (no. 18, 2-inch), nut-bolt (no. 17). pipe wrench (2-inch, 2.5-inch, 3-inch), reducer (3-2 inch, 3-2.5 inch), ring spanner (14-15, 12-13), open-end spanner (14-15, 12-13), large tester, 11kv gloves, alum, bleaching powder, liquid chlorine, water test kit (with chemicals), union (2-inch), rubber packing, wrench (2.5-inch), socket (2.5-inch), nipple (1.5-inch, 1 ft), nipple (6-inch, 1 ft), large iron hammer, handpump pipe (1.25-inch, 10 ft), handpump chain, handpump bearing, handpump cylinder, handpump upper valve (brass with rubber), handpump lower valve (brass with rubber), handpump axle (with nut), handpump body nut-bolt (no. 18, 2-inch), water tank (500l, 1000l, 750l), gi tanker valve (3-inch), measuring tape (100m), pvc pipe (4-inch, 20 ft; 6-inch, 20 ft), gi pipe (4-inch, 20 ft; 3-inch, 20 ft).

CTN :45544542

27 Jun, 2026 NA

Bardhaman - West Bengal

Tender For supply of set of item consist of: 1. 2 sn en 853, 4785 psi, 3/8" dia (9.5 mm) high pressure hydraulic hose reinforced with two layers of high tensile steel wire braid in compliance to din en 853 2sn & sae 100r2at spec. 50m. in length. qty/set-1 nos. 2. 3/8" male/female bspt or npt water jet nozzles, material: brass, operating pressure: from 4000-5000 psi, flow rate: 1 to 100 lpm, spray pattern: full cone/hollow cone, qty/set-1 nos [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45532362

03 Jul, 2026 45.00 Lacs

Bhuj - Gujarat

Tender For certain repair to water supply distribution lines and other connected items at mil stn bhuj and gandhidham under ge (a) bhuj - taking up u/s ci /di/ac water main (incl all fitting) with spigot & socket /ms pipe or any other type of pipe or lead joint incl burning out joint & recovering lead from pipe of 400 mm bore for laying /rerouting of serviceable pipe after cleaning complete all as specified and as directed., all as per item 1 above but 250 mm dia bore complete all as specified and as directed., all as per item 1 above but 200 mm dia bore complete all as specified and as directed., all as per item 1 above but 150 mm dia bore complete all as specified and as directed., all as per item 1 above but 100 mm dia bore complete all as specified and as directed., material and labour di pipes of size 400 mm bore with spigot and socket end centrifugally cast class "k- 9" , in any length laid in trenches/on surface/ over masonary pillar and connection to old or new position complete all as specified and as directed., all as per item 6 above but 250 mm dia bore complete all as specified and as directed., all as per item 6 above but 200 mm dia bore complete all as specified and as directed., all as per item 6 above but 150 mm dia bore complete all as specified and as directed., all as per item 6 above but 100 mm dia bore complete all as specified and as directed., material and labour di pipes of size 200 mm bore with spigot and socket end centrifugally cast class "k- 7" , in any length laid in trenches/on surface/ over masonary pillar and connection to old or new position complete all as specified and as directed., all as per item 11 above but 150 mm dia bore complete all as specified and as directed., all as per item 11 above but 100 mm dia bore complete all as specified and as directed., m&l di bend any type radius and angle tapers any type straght bend increacing decreacing or double socket etc) tee pipe single branch y juction double branch cross(all socket and spiogat collars caps and plug for the pipe socket & spiogat of the following size 250 upto 400 mm dia complete all as specified and as directed., all as per item 13 above but upto 80 to 200 mm bore complete all as specified and as directed., m&l for run laid laid joint for ci pipe of size 100 mm bore complete all as specified and as directed., m&l for run laid laid joint for ci pipe of size 150/200 mm bore complete all as specified and as directed., m&l for ruber gas ket joint/ tyton joint for ci / di pipe of size 250 to 400 mm bore complete all as specified and as directed., m&l for ruber gas ket joint/ tyton joint for ci / di pipe of size 80 to 200 mm bore complete all as specified and as directed., taking down carefully cast iron sluice valve of size 250 mm bore from ci water mains, dismantling parts and reassembling, replacement of brass spindle for sluice valve, class pn 1.0, and repacking stuffing box of sluice valve spindle, refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc complete all as specified and as directed., taking down carefully cast iron sluice valve of size 200 mm bore from ci water mains, dismantling parts and reassembling, replacement of brass spindle for sluice valve, class pn 1.0, and repacking stuffing box of sluice valve spindle, refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc complete all as specified and as directed., taking down carefully cast iron sluice valve of size 150 mm bore from ci water mains, dismantling parts and reassembling, replacement of brass spindle for sluice valve, class pn 1.0, and repacking stuffing box of sluice valve spindle, refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc complete all as specified and as directed., taking down carefully cast iron sluice valve of size 100 mm bore from ci water mains, dismantling parts and reassembling, replacement of brass s

Brass Strip Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors