Latest brazing equipment Tenders | Government brazing equipment Tenders

Central Government/Public Sector

CTN :40563658

11 Jun, 2025 NA

Dhanbad - Jharkhand

Tender For fabrication of submersible pump platform, welding of flange in 4inch dia and 6inch dia ms pipe fabrication of bend etc. required for installation of submersible pump at budora under phularitand section of amp, barora area.

Central Government/Public Sector

CTN :40486406

05 Jun, 2025 64.2 Thousand

Dhanbad - Jharkhand

Tender For clit cutting, clit welding and flange welding in 6 inch ms pipe for use in submersible pump at dhansar pit of adic under, kusunda area.

Central Government/Public Sector

CTN :40491721

07 Jun, 2025 54.6 Thousand

Nagpur - Maharashtra

Tender For providing of custom bid for services - flange welding at two ends of eight inch ms pipe 2000 mtr length of mkd iii ocm

Central Government/Public Sector

CTN :40511813

18 Jun, 2025 NA

Bhusawal - Maharashtra

Tender For supply of push pull rod for wap7/wag9 loco as per clw drg. no. 1209-01.113-006 alt-6 co nsisting of (1) flange as per clw drg. no. 1209-01.113.007, alt-7 (2) tube welding as per clw drg.no. 1209-01.313.008 alt-5 and push pull rod flange hole size should be as per rdso smi no.rdso/2006/el/0241 (rev.o) dated 24.10.06. [ warranty period: 30 months after the date of deliv ery ]

corporations/Associations/Others

CTN :40078927

04 Jun, 2025 6.56 Lacs

Puruliya - West Bengal

Tender For corrigendum : custom bid for services - reconditioning of coal feeder outlet reducer portion (chute) for both units of rtps-1. transportation of damaged/worn-out feeder outlet reducer portion (chute) from rtps, dvc site to vendor workshop and repaired chute from vendor workshop to rtps, dvc site is in the scope of vendor. 2. loading/unloading of materials are in the scope of vendor except at rtps, dvc site. 3. a joint inspection will be done at rtps site for noting & area marking on chute (area to be repaired) before receiving of material. 4. measure the worn-out portion & cut it completely with the help of cutting tools or plasma cutter. 5. grinding and edge preparation is to be done as per requirement on plate before welding. 6. fit the new plate as per requirement and weld it in chute with proper welding electrode308l and grind finish is required after welding. 7. new plate & its bending in required shape is in the scope of vendor. 8. all consumable like welding electrode, cutting wheel, grinding wheel, etc. are in the scope of vendor. 9. plate material (plate thickness-12 mm, material- ss304, make will be only of three company sail, tata & jindal) is in the scope of vendor. 10. repairing/replacement of ms flange if required will be in vendor scope. 11. payment will be made on actual square meter repaired by vendor. 12. quantity of chute for repair is 12 nos it may vary (may be increase or decrease). 13. delivery period is 180 days after placement of wo. 14. part payment against part supply is acceptable. 15. the reconditioned chute has to be guaranteed for a period of 12 months from the date of supply & 06 months from date of commissioning whichever is earlier against bad workmanship. guarantee/warrantee certificate to be furnished at the time of completion of work. 16. party has to submit the 1:1 fitment cum interchangeability certificate of material. 17. the party has to submit the indemnity bond after placement of work order. 18. pre-dispatch inspection shall be carried out by m/s dvc at vendor s works and the vendor has to intimate 15 days in advance regarding readiness of the material. 19. dimensional verification & positive metal identification (pmi) test shall be carried out during pdi for ss 304 plates welded to chute and the vendor has to arrange machine with valid calibration certificate at their own cost. 20. all the old & damaged scrap cut during the course of work shall be returned to m/s dvc during delivery of chute at rtps.

Central Government/Public Sector

CTN :40220303

03 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For supply of transom complete for air spring suspension bogie to drg.no. dc/emu/m/asr-0 -3-003/col.vi, alt 'n'---without top flange to drg.no. aaa03501, item 1 the firm shall fullfil l the requirements as per icf/md/specn.147, rev-02.with amendment no.1. painting not to be applied for 50mm around transom welding area special condition :-suitable packing to be done to avoid damage during transit, unloading and rust prevention during storage [ warranty period: 30 months after the date of delivery ]

State Government

CTN :40425558

04 Jun, 2025 NA

Mulshi - Maharashtra

Tender For providing all types of hardware (n.p.p.) materials in gram panchayat hinjawadi in the financial year 2025-26 - mop (suprim), dry mop, dry mop (local company), harpic-5ltr, santoor soap(150 gm), detol soap(150 gm), lux soap (150 gm), broom soft, broom stick, detol,handwash/ santoor(900 ml), door mat, stenless steel scruber, vayper, room freshner (godrej), naphthalean bolls(500 gm), odonil (6 packet), black hit spre (400 ml), red hit spre (400ml ), door mat, acide (5 ltr), finel ( folex color)( 5ltr), rat poisen, rubber handglose, check duster, floare duster, glass duster, rubber packing (8 inch), nal, khora, tikav, wooden stick, sickle(khurape), rubber pipe (1 inch), pipe clips, nojal / nipple, sulochan, bucket (10 ltr / 5 ltr, dust pan, ghamel, lock, taplon tape, spray, dry mop, vayper, total spaner set, hand glog, acid 10ltr, thiner 5 ltr, 2" m.s. socket, 2,1/2" m.s. socket, 3" m.s. socket, 4" m.s. socket, 5" m.s. socket, 6" m.s. socket, 2" m.s. elbow, 2,1/2" m.s. elbow, 3" m.s. elbow, 4" m.s. elbow, 5" m.s. elbow, 6" m.s. elbow, 2" rubber packing, 2,1/2" rubber packing, 3" rubber packing, 4" rubber packing, 5" rubber packing, 6" rubber packing, 2" nutbolt, 2" m.s. thread flange, 2,1/2" m.s. thread flange, 3" m.s. thread flange, 4" m.s. thread flange, 5" m.s. thread flange, 6" m.s. thread flange, 2" m.s. tread bend, 2,1/2" m.s. tread bend, 3" m.s. tread bend, 4" m.s. tread bend, 5" m.s. tread bend, 6" m.s. tread bend, 2" m.s. welding flange, 2,1/2" m.s. welding flange, 3" m.s. welding flange, 4" m.s. welding flange, 5" m.s. welding flange, 6" m.s. welding flange, 1/2" gi pipe (6mtr.), 3/4" gi pipe (6mtr.), 1" gi pipe (6mtr.), 1. 1/4" gi pipe (6mtr.), 1. 1/2" gi pipe (6mtr.), 2" gi pipe (6mtr.), 2, 1/2" gi pipe (6mtr.), 3" gi pipe (6mtr.), 4" gi pipe (6mtr.), 5" gi pipe (6mtr.), 6" gi pipe (6mtr.), 1/2" gi socket, 3/4" gi socket, 1" gi socket, 1, 1/4" gi socket, 1, 1/2" gi socket, 2" gi socket, 2,1/2" gi socket, 3" gi socket, 4" gi socket, 1/2" gi elbow, 3/4" gi elbow, 1" gi elbow, 1, 1/4" gi elbow, 1, 1/2" gi elbow, 2" gi elbow, 2, 1/2" gi elbow, 3" gi elbow, 4" gi elbow, 1/2" gi tee, 3/4" gi tee, 1" gi tee, 1,1/4" gi tee, 1, 1/2" gi tee, 2" gi tee, 2,1/2" gi tee, 3" gi tee, 4" gi tee, 1/2" gi ball valve, 3/4" gi ball valve, 1" gi ball valve, 1,1/4" gi ball valve, 1,1/2" gi ball valve, 2" gi ball valve, 2,1/2" gi ball valve, 3" gi ball valve, 4" gi ball valve, 2" sluice valve agro, 2, 1/2" sluice valve agro, 3" sluice valve agro, 4" sluice valve agro, 5" sluice valve agro, 6" sluice valve agro, 5" gi elbow, 6" gi elbow, 5" gi tee, 6" gi tee, 5" gi ball valve, 6" gi ball valve, 5" gi socket, 6" gi socket, 1/2"x12" gi barrel nipple, 3/4"x12" gi barrel nipple, 1"x12" gi barrel nipple, 1, 1/4"x12" gi barrel nipple, 1,1/2"x12" gi barrel nipple, 2"x12" gi barrel nipple, 21/2"x12" gi barrel nipple, 3"x12" gi barrel nipple, 4"x12" gi barrel nipple, 5"x12" gi barrel nipple, 6"x12" gi barrel nipple, 1/2" upvc pipe sch.40 3mtr., 3/4" upvc pipe sch.40 3mtr., 1" upvc pipe sch.40 3mtr., 1, 1/4" upvc pipe sch.40 3mtr., 1, 1/2" upvc pipe sch.40 3mtr., 2" upvc pipe sch.40 3mtr., 1/2" upvc socket, 3/4" upvc socket, 1" upvc socket, 1, 1/4" socket, 1, 1/2" socket, 2" upvc socket, 1/2" upvc elbow, 3/4" upvc elbow, 1" upvc elbow, 1, 1/4" elbow, 1, 1/2" elbow, 2" upvc elbow, 1/2" upvc brass fta, 3/4" upvc brass fta, 1" upvc brass fta, 1, 1/4" brass fta, 1, 1/2" brass fta, 2" upvc brass fta, 1/2" upvc brass mta, 3/4" upvc brass mta, 1" upvc brass mta, 1, 1/4" brass mta, 1, 1/2" brass mta, 2" upvc brass mta, 1/2" upvc ball valve, 3/4" upvc ball valve, 1" upvc ball valve, 1, 1/4" ball valve, 1, 1/2" ball valve, 2" upvc ball valve, 1/2" upvc tee, 3/4" upvc tee, 1" upvc tee, 1, 1/4" tee, 1, 1/2" tee, 2" upvc tee, 1/2" upvc brass elbow, 3/4" upvc brass elbow, 1" upvc brass elbow, 1, 1/4" brass elbow, 1, 1/2" brass elbow, 2" upvc brass elbow, 1/2" upvc union, 3/4" upvc union, 1" upvc union, 1, 1/4" union, 1, 1/2" union, 2" upvc union, 250ml upvc solvent,

State Government

CTN :40005494

03 Jun, 2025 25.47 Lacs

Bhavnagar - Gujarat

Tender For corrigendum : supply of various pipes and fittings for stacker-cum-reclaimer a & b at lignite handling plant - bltps. - parallel male stud coupling with nut welding, part no. ge 16 s x 1/2", 2, 7, set, 58, pipe clamp pch 12 pipe size, 6, 100, numbers, 18, pipe clamp pch 28 pipe size, 10, 6, numbers, 20, sae 1 1/2" 6000psi flange without "o" ring groove socket, 14, 4, set, 18, sae split flange 1 1/4" 6000 psi, 18, 5, numbers, 10, seamless tee od 48.3 x 7.1 mm socket weld sch-160, 22, 2, set, 4, swivel elbow with nut welding nipple, part no. se-25-l, 26, 8, set, 4, tee 22l with nut welding nipple,part no. t-22-l, 30, 2, set, 2, tee 25s with nut welding nipple t- 25s, part no. t-25-s, 34, 80, meter, 140, tube od 22 x 2 mm thickness seamless, 38, 50, meter, 12, tube od 48.3 x 7.1 mm thickness seamless sch-160, 42, 6, set, 13, elbow with nut and welding nipple,part no. e-16 s, 46, 15, set, 5, elbow with nut and welding nipple,part no. e- 28 -l, 50, 6

Central Government/Public Sector

CTN :40409994

19 Jun, 2025 NA

Mumbai - Maharashtra

Tender For supply of under frame front part complete for ac lhb coaches as per rcf drg. no. le 11461, a lt- b or latest. note: (1) the part drgs of head stock assy. to drg. no. (a) le 11284, alt-g & (b) le 11285, alt-h should be used for top flange. (2) for masking & painting, para 6.2 of rcf cai no. cai/ rcf/mech/lhb/069, dated 04/06/2024 should be followed. (3) for masking area, rcf drg. no. mi 005 396, alt-c should be followed. (4) the welding of dissimilar metals should be done with suitabl e recommended welding consumables only. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40400954

09 Jun, 2025 NA

Bengaluru - Karnataka

Tender For "high pressure high impulse hydraulic hose1/1/4"bore to sae 100 r13 or din 2 0-023-4sh specification,both side assembled with sae straight split flange head 2" overa ll length:6000mm make:aeroquip/parker/gates only.note:1)90 degrees & 45 degrees and straight hose end flanges shall be of single piece without any welding/brazing.2)warr anty of one year shall be given for the total hose assembly by the supplier from the d ate of supply. [ warranty period: 12 months after the date of delivery ]

Brazing Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors