Latest breaker foundation Tenders | Government breaker foundation Tenders

CTN :41251497

15 Sep, 2025 NA

Allahabad - Uttar Pradesh

Tender For bid to ras supply of rhs of size 96x48x4mm with two coat of paint and one coat of red oxide , rhs of size 66x33x2.90mm with two coat of paint and one coat of red oxide , 6mm thick ms plate for purlin plates of sizes 100x50mm with two coat of paint and one coat of red oxide , normal nut and bolts of size 12mm dia and 100mm long , normal nut and bolts of size 16mm dia and 100mm long , foundation bolts of size 16mm dia and 450mm long , ppgi roof sheet 0.60mm sand colour , ppgi roof sheet 0.60mm , ppgi plain sheet side 1.25mm thick sand colour of size 3x0.60m , cement opc 43 grade in hdpe bag of 50 kg , quick setting compound rapidite , super plasticizers admixture for concrete , natural sand , aggregate 20mm , aggregate 40mm , 3mm thick app based polymeric membrane size 10x1m , water proof siliver paint , bond stone , pcc solid blocks of size 400x200x200mm , aac solid blocks of size 450x300x200mm , non skid water proof tiles 1200x600mm and 10mm thick , ms tmt bars 12 mm dia , ms tmt bars 10 mm dia , ms tmt bars 08 mm dia , ms binding wire not less than 0.9mm dia , asian paints acrylic distemper white smooth finish , white putty , 9 inch stainless steel putty scraper , white cement , paint brush 4inches , 9 inch roller brush , welding rod , self taping screw of size 3inch long. , hdpe sand bags of size 840x360mm , anodised aluminium snap grid frame work for false ceiling with hangers 6mm dia , 12mm thick seamless calcium silicate ceiling of size 600x600mm. , factory made upvc white colour paneled 5mm thick toughened glazed door , factory made upvc white colour sliding window , form work type 2 , fire extinguisher 2 kg , pvc ceiling rose 2by3 terminal with pvc square box complete with screws , led tube light fitting 18w 4 feet long , xlpe insulated pvc seathed heavy duty armoured multi core cable 16 sqmm 2 core aluminum conductor , cable pvc insulated unsheathed single core flexible copper conductor 1100v grade of size 1.5 sqmm , cable pvc insulated unsheathed single core flexible copper conductor 1100v grade of size 2.5 sqmm , cable pvc insulated and pvc sheathed 1100v grade twin core with stranded aluminium conductor , modular switch one way 6 amps one module , ms screw 20 mm per pkt-100 nos , ms screw 25 mm per pkt 100 nos , insulation tape 2 cm width 10 mtr long , mcb single pole 230v ac 50 hz 6 amps 10ka , mcb four pole 230v ac 50 hz 100 amps , mcb distribution boards in sheet metal enclosure 6 ways double door with blanks confirming to is 8623 , mcb distribution boards in sheet metal enclosure 4 ways double door with blanks confirming to is 8623 , residual current circuit breaker with over load and short circuit protection four pole 100 amps , modular switch one way 16 amp 1 module , modular socket 6a 2or3 pin combined 2 module , modular socket 16a 2or3 pin combined 2 module , white cover plate with frame 3 module , white cover plate with frame 6 module , white cover plate with frame 8 module , metal flush box 3 module , metal flush box 6 module , metal flush box 8 module , compact street light luminaire with deep drawn housing complete along with single 36w frl , pvc concealed pipe 25mm dia , pvc concealed l bend 25mm , pvc concealed t 25mm , pvc concealed elbow 25mm dia , pvc casing caping square box 4x4 inches , ceiling fan 1200mm sweep , lightening conductor and earthing of building //bid details 2 / 57

CTN :41777020

22 Sep, 2025 NA

Jalaun - Uttar Pradesh

Tender For providing, installation, testing & commissioning of high mast tower pole by providing high mast of 16m height and 12 nos. led lights (250watt) of approved make with rising system, hot dip galvanized inside & outside, having pole sheet thickness 4mm, top dia minimum 150mm, bottom dia minimum 360mm, base plate 25mm thick, suitable for wind velocity as per is 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes, 1.0 hp power tool motor, 3 point suspension system with steel wire rope 6 mm dia, double drum winch manual handle, foundation bolts 08 nos. nuts, washers, anchor plates, rcc foundation etc. complete in all respect and all material, labour & t&p required for proper completion of work at new mahoi pump canal, districtjalaun.

CTN :41777022

22 Sep, 2025 NA

Jalaun - Uttar Pradesh

Tender For fabrication, providing and erection of 02 nos. winch crab machine (capacity 10 ton, weight approx 850kg) including rope drum of diameter is 0.260m and length is 1.25m, reduction gears mounted on ball bearings, operating handles, foundation and base frame of iron flat of 40x6mm in both side as per is 2062, base plate in left side (size 1.25m x 1.0m, thickness 12.0mm), right side (size 1.25m x 1.0m, thickness 12.0mm), 03 nos. gear shaft for gear-pinion arrangements of different diameters and 1 gear attached with rope drum of diameter 62mm, connecting rods 02 nos. supporting rods in top and 02 nos. in bottom of diameter 32mm as i.d specifications complete in all respect at new mahoi pump canal in tehsil madhaugarh of district - jalaun

CTN :41266674

11 Sep, 2025 NA

Kupwara - Jammu And Kashmir

Tender For bid to ras bid to ras bid to ras bid to ras supply of hdpe laminated sand bag of size 75x40 cm sand colour and each bag having weight not less than 60 gms , shs 6 mm thick size 120x120mm x 2.1m long for column with holes as per tech spec and make of tata sail jindal or as per make att , ismb 150 rsj 150 x 75 mm g1 3050mm long for beam conforming to relevant is and make of tata sail jindal or as per make att , ismb 150 rsj 150 x 75 mm g2 2.2m long for beam 2 conforming to relevant is and make of tata sail jindal or as per make att , ismb 125 rsj 150 x 75mm g3 0.40m long for beam conforming to relevant is as per tech spec and make of tata sail jindal or as per make att , 6mm thick ms plate 150x150mm for shs column incl welding knoching cutting and nuts and bolts washer etc , 12mm dia nut bolt 75mm long inserted in 12mm dia eight nos hole in each column , steel roofing trough of size 1630 mm x 613 mm x 180 mm made out of 2 mm thick as per tech spec att , ms hexagonal nuts bolts and washers 12 mm dia 40 mm long. , ldpe sheet 3 m wide weighing 1.00 kg per rm black in colour and shall contain as per tech spec att , red oxide primer conforming to relevant is , synthetic enamel paint colour green ist quality conforming to relevant is as per tech spec att , thinner as per as per tech spec att . sample to be approved before supply. , dry distemper as per tech spec att. sample to be approved before supply , chalk whiting as per tech spec attsample to be approved before supply , paint brush 4 inch make amar or lucky sample to be approved before supply , pre fabricated double shutter steel door of size 1100mm x1900mm made out of 2mm thick ms black carbon sheet as per tech spec att , supply of swivel bullet proof glass glass 610mm x300mm size 72 mm thick as per tech spec att , silicone gel sealent of 01 pack of 400 gms including aplicator gun , ply wood 10 mm thick as per requirement for flat surface , foundation bolts of 16 mm dia and 250 m long with nut bolts washer etc. , stone aggregate to be crushed rock or gravel 20mm graded confirming to relevant is , manufacturing sand confirming to relevant is as per tech spec att , stone aggregate to be crushed rock or gravel 40mm graded confirming to relevant is as per tech spec att , rapidite quick setting liquid confirming to is 1344-2018 of make acclerec cico fosroc , integrated water proofing compound. , aluminimum straight edge 50mm squre 2mm thick 1800mm long , wooden flat gurmala , water leveling pipe pvc 100 mtr , hand rivet gun machine , drill bit 6mm dia , drill bit 8mm dia , tape measuring metallic 30 m , mason trowel , tasla iron 18 inch , shovel with wooden handle , axe picks with wooden handle , fawda with wooden handle , crobar 5 feet long , rammer with wooden handle of wt 5 10 kg , sieve for sieving fine and crose agg 900 x 1500mm made of angle iron frame with stand , brick hammer 1 and 2 kgs , cutting plier insulate 6 inch , screw driver 12 inch with insulated plastic , pipe wrench 12 inch , pipe wrench 18 inch , adjustable spanner 12 inch , hacksaw frame with 2 blade , hand gloves canvas with isi mark , aluminium sprit level 6 inch , brick line , plumbob

Central Government/Public Sector

CTN :41626668

15 Sep, 2025 NA

Puruliya - West Bengal

Tender For corrigendum : supply of vis for bfp foundation for raghunathpur d d - mdbfp foundation , tdbfp foundation , frame for pre- stressing, hydraulic jack system,electric pump, high pressure tubes, manifold, lifting hook, packing plates, supporting stool, steel shims etc , hydraulic jack system and hand operated pump , travel to site from outstation and return after completion of work , supervision at site including boarding, lodging, local conveyance etc all complete

CTN :41512711

08 Sep, 2025 11.30 Lacs

Thiruvananthapuram - Kerala

Tender For supply and installation of open gym equipment at panniyannur grama panchayath in thalasseri lac, kannur - retender - open gym equipment, od84136/2025-2026 : single bar - supply and installation of single bar having the following specifications: dimensions: (l x w x h) 3550 x 2590 mm. main frame - made from ø 48 mm od “b” class g.i. pipe. frame of single bar – ø 33 mm od “b” class g.i. pipe. foundation plate – m.s. round plate of ø 250 mm & 8 mm thick. top closing cap’s - decent design size pp / hdpe / ms. material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart – made from aluminum / stainless-steel stick-on product. all joints must be robotic welded and zinc primer paint should be applied at all the welding points prior to finishing, od84137/2025-2026 : horse rider - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - ø 114 mm od “b” class gi pipe. foundation plate – m.s. round plate of ø 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon / hdpe material. remaining frame – is made by ø 48 mm od “b” class gi pipe. seat frame – is made by ø 48 mm od “b” class gi pipe. seat position must be horizontal to 110 -120 degree. link - made up of ø 48 mm od “b” class g.i. pipe. angle between link and ground position is 10-20 degree. handle - ø 33 mm od “b” class gi pipe. paddle vertical support - ø 60 mm od “b” class gi pipe. handle frame- ø 42 mm od “b” class gi pipe dually bending design. foot pipe - ø 33 mm od “b” class gi pipe. support frame – 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe. bearing bush closing cap – pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand. bearing bushes - ø 60mm od seamless pipe. pin – made of ø 25 mm m.s. bright bar. grips - high quality rubber ø 46 mm od. circlips – a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be robotic welded and zinc primer paint should be applied at all the welding points prior to finishing, od84138/2025-2026 : arm and paddle bike - supply and installation of arm and paddle bike having the following specifications: dimensions: (l x w x h) 990 x 500 x 880 mm. main frame –100 mm x 50 mm x 2.5 mm rectangular cr pipe with bending design. foundation plate – m.s. round plate of ø 250 mm & 8 mm thick. handle – ø 33 mm od “b” class gi round pipe dully bending design. side and top cover – 1.6 mm thick ms laser cutting profile is used. seat – 380 x 275 x 60 mm thick hdpe blow moulding. paddle –100 mm x 50 mm capsule pipe and 40 x 16 mm ms flat should be used for connecting the paddle and shaft. closing cap’s – pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing bushes - ø 60 mm od seamless pipe. bearing - use is 6005 permanent lubricating sealed reputed brand. shaft -made up of ø25mm od ms bright bar. circlips– a 24 circlips ar

Central Government/Public Sector

CTN :41676635

15 Sep, 2025 2.46 Lacs

Angul - Odisha

Tender For demolishing of damaged concrete rcc base, dismantling of m.s foundation frame and casting of new concrete rcc base with fabrication of new m.s foundation frame for pump-motor no-3 of phase-ii along with anticorrosive painting of all foundation frame

CTN :41668859

23 Sep, 2025 NA

Chandigarh - Chandigarh

Tender For construction of green house at dbo d d - stone aggregate single size 20 mm nominal size , coarse sand zone iii , portland cement 0.2225 cum , cement concrete block 40 cm by 30 cm by 20 cm , rr stone , ms pipe ms square tube ms tee ms foundation bolts 16 sqmm dia ms flat , acrylic exterior paint , acrylic exterior primer , painting brush 6 inch 5 inch and 4 inch , ready mixed pink or grey primer , synthetic enamel paint , 60 mm puf pannel for roof with 0.50 mm thick ppgi ribbed sheet on both sides with layer of rigid cfc free polyurethane foam of density 40 kg plus minus 2kg cum as insulation in between. , 6mm thick polycorbonate sheet on roofing , iron cutter bladge 100mm , iron cutter bladge 300mm , welding rod , self drilling screw 40mm , 1 mm thick ms sheet steel door shutter with frame of 44x40x6 mm ms angle of size 0.90 x 2.10m including ms sliding door bolt and tower bolt ) /bid number : gem/2025/b/6634053 * /dated: 01-09-2025 & & / bid document 1 / 19

corporations/Associations/Others

CTN :41671894

08 Sep, 2025 NA

Amritsar - Punjab

Tender For replacement of 66kv and 220kv (sf-6) breaker foundations at various substations under p&m circle amritsar

corporations/Associations/Others

CTN :41508588

03 Oct, 2025 9.77 Crore

Pune - Maharashtra

Tender For request for bids for supply, installation and commissioning of slaughter house plant as per apeda standard - a: civil work items, dismantling the reinforcement cement concrete (r.c.c.) work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete., dismantling brick masonry in lime or cement mortar and stacking the material as directed with all leads, lifts etc., removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete., removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete., removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete, removing purlins from roof including stacking as directed with all leads , lifts etc. complete., removing rafters from roof including the materials as directed with all leads , lifts etc. complete., removing queen post truss from roof and stacking the materials as directed with allleads and lifts etc. complete, removing galvanized iron (g.i.) or asbestos cement (a.c.) sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete., excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the excavated material upto distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.50 m) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the cubic meter (cu.m) excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift from 1.5 to 3.0m.) by mechanical means, excavation for foundation in soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (lift from 1.5m to 3.0 m.) by mechanical means, lift upto 3.0 m, excavation for foundation in hard-rock by blasting including cubic meter (cu.m) trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramming etc. complete. (lift from 1.5m to 3.0 m) by mechanical means, filling in plinth and floors with approved excavated materials available at site in 30 cm layers include- ing watering and compaction with plate compactor to required proctor density etc complete., filling in plinth and floors with contractors material/brought from outside and approved by engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc. complete., providing dry trap / granite / quartzite gneiss 200 mm thick hard core metal spread in two layers each of 125mm thick crushed to 100 mm consisting of m

Breaker Foundation Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others