Latest breaker scrap Tenders | Government breaker scrap Tenders

State Government

CTN :40585239

10 Jun, 2025 NA

Mulshi - Maharashtra

Tender For providing and supplying material - supplying and providing health material, supplying and erecting modulartype switch6a/10a, supplying and erecting street light bracket for erection of single fitting made from 40 mm. dia b class g.i.pipe 1.0 m in length, 36 watt led light sensor, 50 watt led light sensor, 36 watt led light without sensor, 50 watt led light without sensor, light bracket, pvc tapes, electric service wire, 5a switch, mcb box, 32 amp switch, armoured cable, 16 amp fuse, 32 amp fuse, pipe clamp, fitting and labour charge, providing cement concrete foundation including excavation for the poles 60 cm x 60 cm x 1.5 m deep in 1:3:6 cement concrete (20 x 25 mm stone metal) and 45 cm x 45 cm x 45 cm/45 cm dia. x 45 cm height plinth duly plastered and with necessary curing and finishing in an approved manner.(for 8.5 to 9 m poles) (16-3-2), supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm. dia with 4.5 x 3.65 x 3.25 mm thickness (4.5 + 1.75 + 1.75m) length respectively and total 8 m long with pole cap, base plate in provided foundation.(weight 101 kg.) as per specification no.oh-pl/stp, supplying and erecting street light bracket made from 25mm.dia b class g.i. pipe 0.6m.in, supplying and erecting led street light fitting suitable for 36w to 40w led street light, including lamp,with pf > 0.95 class ip 65, supplying and erecting led street light fitting suitable for 50w lamp, including lamp, with pf > 0.95 class ip 65, supplying and erecting led street light fitting suitable for 60w lamp, including lamp, with pf > 0.95 class ip 65., supplying and erecting led street light fitting suitable for 90w led street light, including lamp, with pf > 0.95 class ip 65., supplying and erecting led flood light fitting of 120w, including lamp, with pf > 0.95 class ip 65, supplying and erecting led flood light fitting of 150w, including lamp, with pf > 0.95 class ip 65, providing rental basis hydraulic bucket vehicle of hight 13 mtr. and weight capacity 200 kg with driver, oprator and disel etc.for day basis, labour charges for led fitting on street light or ms light pole., dismentaling charges led street light of pole, 1.25 mm crca sheet metal enclosures box for timmer and mcb, supplying pvc insulated pvc round sheathed 1.5 sq.mm, supplying and laying armoured cable 4c x 6 sq.mm, supplying and laying armoured cable 4c x 10 sq.mm, supplying and laying armoured cable 2c x 10sq.mm, supplying and laying armoured cable 4c x 16 sq.mm, supplying erecting & marking spmcb 6a to 32a,b-series (for lighting) 5-3-3, supplying erecting & marking dpmcb 6a to 32a, bseries (for lighting) 5-3-7, supplying and erecting programmable digital almanac timer microcontroller based with real time clock to operate on derived switching "on" & switching "off" street light as per daily sunset and sunrise respectively, supplying & erecting crimping type aluminium lugs for cable upto 16 sq mm complete, supplying & erecting crimping type coper lugs for cable upto 1.5 to 6 sq mm complete, supplying and erecting two pole power contactor 250v 32a for time switch complete erected on wooden block/provided box, with necessary materials.4-4-3, supplying & erecting mains with 2x1.5 sq mm f.r copper pvc insulated wire laid in provided conduit/trunking/inside pole, supplying & erecting mains with isi mark wp2 x 6sq mm 1100 v. grade aluminium pvc insulated pvc sheathed wires on g.i. bearer wire no 8 swg 1-4-3, supplying & erecting mains with isi mark wp2 x 2.5 sq mm 1100v grade aluminium pvc insulated pvc sheathed wires on g.i. bearer wire, supplying & erecting mains with isi mark wp2 x 10.00 sq mm 1100v. grade aluminium pvc insulated pvc sheathed wires on g.i. bearer wire, 25 amp, 32 amp three phase l/t contactor, 2.5 sq mm multistand copper wire, insulation tape, water proof tape, street light pole box frp, cement street light pole clamp, m.s. street light pole clamp, led street light arm bend pipe, small size frp box f

CTN :40595765

24 Jun, 2025 NA

Jodhpur - Rajasthan

Tender For supply of tool kit 30166 1 anchor hold fast bar,tool kit cvd-17082 25768 block wooden for jack,tool kit cvd-2540000065 pad lock ig 4 lever 40mm,tool kit bbd-4900000-001 gauge tyre pressure 30 kpa,tool kit cvd-x4700611 de spanner 25x28mm,tool kit bbd-f-5120-000060 screw driver 1.2,tool kit cvd-30166 1 anchor hold fast bar,tool kit cvd-2573 5450 9960 fuse 10 amps fitted on cab fuse box,tool kit cvd-x4700211 de spanner 14x15 mm,tool kit f-4735000 screw driver 200mm,tool kit f-4735500 ring spanner 10x11 metric,tool kit ncvd-f-0000001 tyre valve cap metallic,tool kit bbd-5120-99803-0263 tyre lever,tool kit bbd-127 311 013 172 de spanner 13x17,tool kit cvd-6122 single filament fhl 12v,tool kit cvd-x4703311 phil screw driver 100mm long 6 dia,tool kit cvd-39302 tin box lamp filament,tool kit cvd-x4701111 ring spanner 24x27mm,tool kit cvd-x4702011 de spanner 11 16x19 32,tool kit ncvd-54831000 spare fuse 10 amps,tool kit cvd-ia-030003 fog light 12v,tool kit bbd-mt1-5140-99942-6898 tool bag

CTN :40580648

24 Jun, 2025 NA

Delhi - Delhi

Tender For supply of fd electrification solar and hybrid - supply and installation and testing of fd elect 5 kva solar hybrid plant of capacity 2 kw wind turbines and 3 kw solar modular along with all standard accessories for bidang , supply and installation and testing of 10kva solar hybrid power plant , solar street light 15 w or higher wattage , seven meter hdg pole , solar photovoltaic module , power conditioning unit , battery bank , vertical horizontal axis windmill , junction box , mc4 connector , dc rated fuse , copper cables , lightening conductor and earthing , cement opc grade 43 , pcc hollow block , coarse sand , stone aggregate crushed stone 20mm graded , stone aggregate crushed stone 40mm graded , tape measuring fiber 30 mtr long , tape measuring metallic 5 mtr long , electric hand drill machine , working goggle , hand gloves rubber , hand gloves leather , pan motor , phawrah with handle , shovel with handle , axes picks , crow bar , gum boot rubber , spirit level , plumbob steel , hammer , hdpe tarpaulin , steel bucket , mason trowe 125mm , mason trowel 150 mm , open jaw double ended spanner set , clay hammer 800 gms , brick hammer 1250 gms , plier side cutting taparia , solar panel , battery vrla , wind turbine , generator set 15 kva , copper earthing set , copper lightning arrester , fire extinguisher 2 kg , plastic dividing strip 3 mm thick , hardcore not exceeding 63mm , wiremesh , trowels as per isi mark , plumb bob steel , nylon mason thread 100 mtr long , measuring tape 05 mtr , measuring tape 30 mtr , drilling machine , tool kit for electrician bid number/ & ( * ) : gem/2025/b/6302503 dated/ + : 03-06-2025 bid document/ 3 3 1 / 42

CTN :40577950

24 Jul, 2025 NA

Delhi - Delhi

Tender For procurement of spares for rafale aircraft - nut,self locking, socket connector, socket connector, multi-plug, circuit-breaker, circuit breaker, block,earth leakage, breaker, circuit breaker, i/o module, auxiliary contact, circuit breaker, level runs, relay, cover,protective,du, trapezoidal belt, wire rope assembly, pin,straight,headle, connector,rod end, adapter,resilient, quick release pin, bracket,electrical, bracket,electrical, valve, equipped, valve, equipped, filter kit, auxilary module, insulat msl rack, ob mpsmc module, pp712 board, pci unit, horizontal shaft, safety controler, w127 cable, controller, control panel, light block, light block, dc power supply, fuse, inductive,sensors, poppet check valve, sensor of secu cs31, lifting pins, button,plug, connector support, plate, rear, impact fuse, eq.ventral fin tip, conductor assy p/st

CTN :40319578

05 Jun, 2025 18.23 Lacs

Budaun - Uttar Pradesh

Tender For corrigendum : for running contract for hon,ble sansad nidhi/vidhayak nidhi and other deposit works under edd-budaun (semi turnkey). - cartage of following material from store center nawada, budaun to je store/je store to site of work including loading & unloading at both ends maximum distance up to 30 km., a) pcc pole 8.5 mrt long/st pole 11 mtr long., b) 11 kv xlpe cable of 3x70/3x120/3x185/3x300 sq.mm., c) 250/400 kva t/f., d) 11 kv ct/pt unit of different size, e) 11 kv jointing kit of different size, f) 11 kv pilfer proof cubical of different size, g) lt abc cable of size 1x16, 3x50, 3x95, 3x120 sq.mm., cartage of line material (11 kv pin insulator, disc insulator, stay set, cross arm, gi wire, earthing rod, ms channel, ms angle, etc) from store centre to dump site & then dump site to site of work on day to day basis, including loading & unloading at both ends maximum distance up to 30 km., cartage of 10 kva & 25 kva transformer from store centre to site of work including loading & unloading at both site, the work of safe carriage 11 kv o/g vcb store center nawada budaun to work of site distance up to 0 to 30 km including safe loading & unloading., cartage of 63 kva to 100 kva transformer from store centre to site of work including loading & unloading at both site., earthing of each 11 kv line pole & t/f properly after drive of electrodes if size 20mmx250mm and connection the earthing point with gi wire., erection of pcc pole 8.5 mtr long after digging a pit of size 1.20 x 0.60 x 1.6 mtr in all type of soil including back filling of the pole with proper ramming after completion of work., erection of stp pole 11 mrt long after digging a pit of size 1.20 x 0.60 x 1.6 mtr in all type of soil including back filling of the pole with proper ramming after completion of work., fabrication and fixing of all 11 kv h.t/l.t. line accessories., erection of double pole on pcc pole 8.5 mtr/stp 11 mtr. long after digging of pit of required size including fabrication and fixing of top channel, droper channel & base channel alongwith, fixing all 11 kv accessories, fuse set 11 kv pin insulators and making connection properly., construction of new plinth for 250/400 kva as per uppcl norms, mounting of 250/400 kva t/f on plinth as per uppcl norms, providing and fixing wiremess fencing for 250/400 kva, erection/installation of following of vcb o/g in consumers site and cable joint of the panel to including earthing, grouting, anchor bolt of panel of making/repairing of pocket for cable to insert in panel form trench and fixing taping of busbar with wiring for ac,dc connection including providing ac and dc supply., chemical earthing for 250/400 kva t/f neutral and body complete, chemical earthing for vcb o/g, mounting of 10 & 25 kva t/f with proper jumping of ht side and fixing of cable on lt. side of t/f making connection properly., mounting of 63 & 100 kva t/f with proper jumping of ht side and fixing of cable on lt. side of t/f making connection properly., mounting of ct/pt unit with proper jumping of ht side and fixing of cable on lt. side of meter cubical properly, fixing of meter cubical as per uppcl norms, making a section pole to exist pole after fabrication & fixing of t channel fixing of all 11 kv accessories., erection of stay rod complete after digging a pit of size 1.20 x 0.60 x 1.6 mtr and grouting the same in block of size 0.60 x 0.60 x 0.30 mtr and nuzzling at the both ends and filling the pit with excavated earth soil with proper ramming., laying lifting stringing of proper sagging of acsr weasel/rabbit/dog conductor for 3 phase, 3 wire 11 kv line including binding & jumpering properly., laying lifting stringing of proper sagging of 11 kv xlpe cable of 3x70, 3x120, 3x185, 3x300 sq.mm., laying of underground 11 kv xlpe cable of 3x70, 3x120, 3x185, 3x300 sq.mm. sizes with open trench by brick & sand as per uppcl norms., filling the 11 kv jointing kit (joint kit providing by c

corporations/Associations/Others

CTN :40579335

06 Jun, 2025 NA

Jabalpur - Madhya Pradesh

Tender For auction sale of u/s bend and pipe with ceramic line scrap,u/s copper cable pvc scrap,u/s, brass scrap,u/s measuring instrument scrap,u/s 20 ltr. cap. empty plastic jerry cam,u/s 35 ltr. cap. empty plastic jerry cam,u/s 50 ltr. cap. empty plastic jerry cam,u/s 200 ltr. cap. empty plastic jerry cam,u/s oil plastic bottles and plastic seals and other plastic scrap,u/s fluorescent and other mercury containing,u/s used lubricating oil with drum,u/s 400kv sf6 circuit breaker scrap,u/s current transformer ct scra?,u/s fixture solution scrap,u/s 200/210 empty steel drums,u/s crusher hammer ring scrap,u/s bullring segment steel scrap,u/s gi sheet tin cut piece rusted drums and light ms etc scrap

CTN :40557087

20 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For supply of bolt, key wood ruff, adaptor(e3-20-1 by 8), oil seal pilot bearing, kit shim 72.5 odx 65 id (plate xxi c), guide hose lh (plate vi ac), spring torsion, adaptor, kit shim 79.5 od x 72 id (plate xxi c), kit shim 64.5odx 57 id (plate xxi c), rubber pad 30x20x12 (plate iv h), nut 1-1 by 2 inch unf x 27.5 thk, spring steel bush (44.8 odx3), shim, cover battery (plate viii e), cap steering wheel (plate xii f), adaptor 39.5mm long. m by m 1 by 2 inch bsp x 7 by 8 inch sae lvb (, adaptor (plate xiv b), adapter, washer hardened fit under it.2 (jcb super plate , clip worim drive, clip p-clip, 25mm dia (jcb super plate xxi h), bolt banjo, bracket throttle (plate xxiv c), plate sealing (plate xxviii a), seal, washer rebound 16x80x6(plate iii l), key 2.2 mm (plate iv a), seal top ratl window (plate iv t), spacer 50mmx115mmx5.5mm, spacer main shaft seal, screw bleed (plate xxi c), adaptor, hose, baffle pre filter (plate xxx a), hose 400mm (plate xxx b), cap, cover rear steering column (plate xii e), cover steering column front (plate xii e), adaptor 5 by 8 inch bspx1 by 2 inch bsp m m, spacer 50mmx115mmx6.0mm, light number plate, seal door(plate iv u-4), nut rivet m8 (plate iv ao), bolt gr-8.8m12x130 long, spacer (plate v i), bush spring 51.2odx44.8idx70 long, seal, pin boom lock (plate vi v), blanking disc(b4-1-1 by 04), bracket support (jcb super plate xiii p), adapter includes o ring (plate xv c), adapter (plate xv c), spacer 50mm x 115mm x4.5mm, circlip (plate xxi e), dipstick (jcb super plate xxi h), rubber hose 6x12x800 (plate xxiii b), plate master cylinder adapter (plate xxiii c), clip jubille, bracket side panel mounting (plate xxviii b), adaptor lvb (jcb super plate xiii d), mounting rubber, clamp gear lever gaiter (plate x v), ring clamp load (plate x x), adjusting nut, pad wear, lower (plate iii i), pin (plate iii y), mounting bracket fuse (plate iv c), guard hose rh (plate vi e), micro relay change over 12v, micro relay n o 12v, clevis lh thread (plate x d), washer thrust (jcb super plate xii d), adapter g3 by 8a-7 by 8 unf(m)(jcb super plate xiii f), pipe support (jcb super plate xiii p), adaptor (plate xv c), seal(e4-3-5), spacer 50mm x 115 mm x 3.5 mm, spacer lay shaft od 72.5x id 63.5 (plate xxi c), pipe assy 4wd(plate-f5-5-10 by 43), clip 9.5mm dia., pinch type (jcb super plate xxi, thrust washer side gear, needle thrust brg, light interior(c3-10-1), mounting bracket fan (plate iv aj), bush (b3-2-2), liner bearing(ispl sl no-488), knob with switch (plate x v), tee-adaptor, adapter (plate xv c), spacer 50mm x 115mm x4.0mm, plate counter (jcb super plate xxi f), boot air pre cleaner (plate xxvi a), jubilee clip, guide rh (plate vi ac), pad wear, lower fix (plate iii h), plug locking (plate iii i), mounting roof liner assy rear (plate iv f), bush spring 51.2odx44.8idx70 long, hose tank side (jcb super plate xiii h), spacer 50x115x5mm(f1-3-1 by 02), circlip internal (f5-1-30 by 15), seal rear window (plate iv t), guide hose lh (plate vi aa), guide hose rh (plate vi aa), spacer (plate v i), bracket retainer lh (plate iv s), socket mobile charger, cover fuse box (plate iv ae), bush 44.8 idx51.2 odx114 long(os-630), washer spacing (plate v h), plate gauge (plate ix a), reverse horn flasher, shield heat lh(plate x a), shield heat rh (plate x a), plate retainer (jcb super plate xii a), adaptor, adaptor (el-9-13 circuit, auxiliary valve block), hose grease (plate xviii c), seal, nut m30 x 2 static (jcb super plate xviii j), differential nut, spacer main shaft ss750 (plate xxi c), ring seal, connector, benjo(jcb brake system plate g1-1-10), hose hyd oblique oti cooler (plate xxviii a), fuel tank cap (plate iii c), handle lh (ms sl-40), adopter m by m 1 inch bsp, cap side shift stabiliser, nut rivet (plate v b), stainer fuel filter (plate iii c), pin pivot, brake pedal (plate x p), adapter (plate xxi c), adaptor (jcb super plate xiii h), bush(plate-f1-6-1), guard hose lh (plate vi e), clamp, adopter 90 deg elbow (plate-xiii

CTN :40540968

21 Jun, 2025 NA

Mumbai - Maharashtra

Tender For supply of flexible hose , pilot lamp red xb7ev04bpn , memory card 6es79548le030aa0 , backpane for plc 6es75901ab600aa0 , ai module 6e575317kf000ab0 , front connector 6es75921amoo0xb0 , di module , plate door interlock , terminal shroud , terminal block 283901 , terminal block 281901 , terminal block 280519 , terminal block 20023201 , multipin connector ms3102r2214s , multipin connector ms3106f2214p , panel light mtl2835150 , door limit switch 3se5122oya003se5000ae01 , terminal fuse with indication 281611281541 24v dc , fuse glass , teflon tape , vent valve , spacer seal housing , o ring 3912 , filter drier replacement core , bearing spacer , relay , shaft seal sea water pump , thrust bearing kit , gear set 64 33 xjf151n , valve 43 way , flex metal hose 113 , sea water pressure switch typ , oil temperature relay , delivery pressure gauge , thermostat rt 11 , flow switch , safety high and low pressure cutout , load break switch & fus , inset for valve with ratchet , auxiliary switch , auxiliary switchover , switch , auxiliary contactor block 2s 2o 1sov 1oov , auxiliary switch , starter , air contactor , motor protector , attachment adaptor , air contactor , safety relieve switch , measuring transducer 24vdc , fuse 500v , fuse 500v , fuse insert , fuse 500v , oil protection control diff pres cntr with bntime de swi , timing relay , timing relay , relay , transformer , sight glass set , fuse switch , fuse switch , fuse switch , freeze protection thermostat , switch , thermoregulating valve , nipple with coupling , press key , pilot lamp , pilot lamp , selector switch , expansion valve unit , pilot lamp , pilot lamp , selector switch key , lamp holder , pilot lamt white , slide valve indicating mechanism microprocessor , lock nut , o ring kit , pilot tube fitting , bleed valves , co2 cylinder interconnection pilot hoses , co2 cylinder head valves , main control panel , mimic panel , junction box type 1 , junction box type 2 , poddcv 25mm , mannual lever box assembly , zonal valve cabinet , push button epbs , pilot release cabinet , time delay unit , ss 304 tubing , capacity control solenoid valves tag nosv1 & sv2 , motor starter , fourpoint contact ball bearing , motor starter , thermometer , shaft seal chilled water pump , motor starter , crank shaft , valve plate set , bearing cap , bearing cap , shaft seal end bearing , seal lip , crankcase heater , schrader connection , oil pump complete , set of gaskets , shaft seal complete , solenoid valve oil return line , defrosting control sensor , discharge line thermometer 0120 c , fuse socket nh00 , contact auxiliary1no+1nc , contactor3p 440 vac 50 amp , spring compression , pin dowel , pin spring , key square 12x12x312 , valve check , spring compression , rotor pair , retainer check valve , spacer outboard bearing , spacer inboard bearing , shim , ring retaining , spring compression , bearing cylindrical roller , bearing cylindrical roller , bearing cylindrical roller , bearing cylindrical roller , slydring , pin dowel special , rod indicator , locknut , locknut , cover slide stop , plug pipe1214 nptf w375 orifice , plug 1827 nptf w062 orifice , bearing angular contact ball , cover cylinder , seal gas , retainer check valve , stop slide , assembly rotor casing , housingseal , o ring & gasket kit , kit for shaft packing , switch isolator63 amp , motor protection , lamp 24vdc white , push button 1 noblue , relay 4co 24vdc , switch selector 230 vac2 amp , programmable logic control , thermister relay , selector switch key , relay insulation 24240 acdc 1no , power supply ip380vacop24vdc 10 amp , temp converter , signal isolator 1 in 1 out , mcb 2 polec curve 6 amp , mcb 2 pole c curve 10 amp , mcb 2 pole c curve 02 amp , mcb 3 pole c curve 02 amp , mcb 1 pole c curve 04 amp , mcb 2 pole c curve 04 amp , lamp 24vdc green , relay base , relay 4co 110v ac , power indicator ip420 m a , handle rotary , contact block , transformer 380115vac630va , hmi , din connector wnptf connectio

Co-operative

CTN :40550151

06 Jun, 2025 NA

Mau - Uttar Pradesh

Tender For supply of general electrical items - supply of general electrical items, tacho generator for dynodrive 40 hp.greaves make, exhaust fan 450 mm. 960 rpm, 250 v, crc-2-26 liqud 300 gm, ctc 300 gms., digital multimeter motwani make, mager 0-500 motwani make, brass cabon brush holder, tacho generator for dynodriv 60 hp. greaves make., carbon bush for cane unloader without tails size 100x20x15 mm. with central grooves(as per sample), carbon bush for 250 hp ke make motor with double tail size 38x22x32 mm., carbon bush for 90 hp ke make motor with double tail size 40x32x22 mm., pvc cooling fan 2 hp ke make motor, pvc cooling fan 3 hp ke make motor, pvc cooling fan 5 hp ke make motor, pvc cooling fan 7.5 hp ke make motor, pvc cooling fan 10hp ke make motor, pvc cooling fan 12.5 hp ke make motor, pvc cooling fan 15hp ke make motor, pvc cooling fan 20 hp ke make motor, range 0-150 a ctr 150/5 ac ammelei size 100x100 mm, but 0-200 a ctr 200/5, -do- but 0-300 a ctr 300/5, -do- but 0-400 a ctr 400/5, -do- but 0-500 a ctr 500/5, -do- but 0-600 a ctr 600/5, -do- but 0-1000 a ctr 1000/5, -do- but 0-1250 a ctr 1250/5, ac volt meter size 100x100 mm. range 0-500, screw gauge., insulated combination plier 8 (taparia make), insulated nose plier 8 taparia make, phase taster 6 taparia make, screw driver set (taparia) 6 ,8 & 10 , limit switch ac at 415 v.dc at 230 v. type llgs bch make, -do- lli 10 amp. bch make, solonide valve single acting sanchhor below 0-51 type g532/4-3a coil voltage 240 v., solonide valve duble acting sanchhor below 0-50 type g532/4-3a coil voltage 240 v., electronic countinuity tester., lug crimping paste dowels make., backlite bridge for 400 amp. switch, electronic controller gac-40 greaves make, motor connection plate for siemens make 4 spead/1710 kg./mt. gd sq. c.f. motor., eddy current coil for 40 hp dynodrive, eddy current coil for 60 hp dynodrive, slipring for 90 hp ke motor, slipring for 250 hp ke motor, carbon brush holder for 90 hp ke motoe, carbon brush holder for 120 hp ke motoe, copper carbon brush(45x32x17) mm, copper carbon brush(45x32x22) mm, electronic timer gac-40 for dynodrive., power capacitor 25 kvar siemence make, volt meter 0-500 volt, change over switch 4 pole, 63 amp. havels/kenbar make, change over switch 4 pole, 630 amp. havels /kenber make, change over switch 4 pole, 32 amp. havels /kenbar make, heating element -2 mtr. long.u type 2000 watt, solonide coil for solonide valve serader below type g- 50 coil voltage-240, push button station 8 way with s.s. encloser complete., auxillery contact block for 3 ta 24/28 abc. siemens make, foot switch tyoe esgy-1440 volt single pole double acting with element., mashroom type push buttom vaishnu make, element for above 1 no.+1 nc.vaishnu make, cmm.fuse switch fixed type 250 amp. g.e. make, cmm.fuse switch fixed type 630 amp. g.e. make, cmm.fuse switch 400 amp. draw type g.e. make., cmm. fuse switch 630 amp. draw out type g.e. make., ictp main switch 100 amp., tpn switch 63 amp. bch make, fuse carrier for cmm switch 250 amp. ge make., hydroulic thruster break thrust 18-25 kg., a.c. voltmeter 0-500v, 144mm 144mm

Central Government/Public Sector

CTN :40543570

21 Jun, 2025 12.50 Lacs

Tiruchirappalli - Tamil Nadu

Tender For tender for the supply of electrical maintenance materials at iim tiruchirappalli - 5a switch (make: legrand) model no: 673000 (myrius), 5a 5pin socket (make: legrand) model no: 673044 (myrius), 15a switch (make: legrand) model no: 673010 (myrius), 15a 3-pin socket (make: legrand) (type: 2 module) model no: 673045 (myrius), 2.5 mfd ceiling fan condenser., 4 feet tube light fitting (m. no: v2 vector 28w tch207)make: philips, 28w lamp 4 feet, product name: mcb (miniature circuit breaker)type: single pole (1p)rated current (in): 16 amperesbreaking capacity 6 ka / 10 karated voltage 230v ac, 50 hznumber of poles 1 (phase only)mounting type din rail mounting (35 mm), name rccb (residual current circuit breaker)type 2-polerated current (in) 40 amperesrated sensitivity (i n) 300 ma (milliamperes)voltage rating 230/240v ac, 50 hznumber of poles 2 (l + n)tripping type electromechanicaltripping time 200 ms at rated residual currentmounting din rail (35 mm)short-circuit withstand: typically, 6 ka with backup mcbtest button yes (for manual function check)standards compliance: is 12640-1 / iec 61008-1application protection against earth faults, electric shocks, glass fuse-6a, glass fuse-4a, 5a - 3 pin plug top, 16a - 3 pin plug top, name: 2 module fan regulatormake: legrandmodel series myrius mounting type: modular (2 module size)regulation type: rotary typecontrol steps: 5 stepscolor :white, name: night lampmodel number 30974brand philipstype: led step lightvoltage 230v accolor temperature: 3000k (warm white)luminous flux: 30 lumensmake: philips, name: led light fittingip rating: ip66 (outdoor)light colour: whitetype of luminaire: ledrated power: 45 whousing material: aluminium pdccertification: bislumen: 5400 lumenshape: rectangularled life span: 50000 hroptical cover: toughened glasspipe diameter (mm):50 mm, name: 2-pole mcb (miniature circuit breaker)current rating: 40 amperespoles: 2 (double pole)breaking capacity 10 ka (typically)voltage rating: 240/415v acmounting type: din rail mountingstandards compliance: is/iec 60898-1, name: choke led driver (m.no: t124000-36e10s)make: fulham, ignitor (m.no:spd1277s5a5k67) make: fulham, exhaust fan capacitor [1.5mft & 1 mft], name: block screwsizes: 2 inch, 1.5 inch, 1 inchquantity: 100 pieces each sizethread type: fully threaded, name: heater coil with anodecapacity 3 kw (3000 watts)voltage rating 240v acthread type b.t.h. (british thread heater)thread size 1 (1.25 inch)heating element type tubular sheathed (copper tube)anode material: magnesium (to protect tank from corrosion)application suitable for storage water heater.protection overheat protection (thermostat optional)certifications: isi certified, distilled water, application: battery, 200 mm sweep exhaust fan brisk air, make: crompton, single-phase motor 1/2 hp (mono block), make: kirloskar, fan regulator nob, make: legrand, name: led tube light fitting (4 feet / 1200 mm)length: 4 feet (1200 mm)power consumption: 20winput voltage: 230v acluminous flux: 1800 2200 lumenscolor temperature: 6500k (cool daylight)mounting type: surface mounthousing material: polycarbonate diffusercri (color rendering index) > 80life span 25,000 50,000 hoursip rating ip20 (for indoor use), 8 modular box with plate, type: surface typemake: legrand, 4 modular box with plat, type: surface type make: legrand, cable tie ( 300 mm & 150 mm) -100 piece, 1.5 sqmm multi core cable (cpwd approved brand), 4 sqmm multi core cable (cpwd approved brand), name:32a single pole mcb, (cpwd approved brand), name: olr, rating 4-6.5a, make: l&t type: mk1, name: starter, rating 4-6.5a, (cpwd approved brand), name: starter, rating: 6-10a, model: mug06(cpwd approved brand), name: olr, rating: 6-10a, model: mug06, make: l&t, name: starter, rating:15- 25a, model: mug010(cpwd approved brand), name: olr, rating:15- 25a, model: mug010(cpwd approved brand), name: 10 w led bulk head fitting(cpwd approved brand), name: 7 watts led night lamp, colour: white(cpwd approved brand),

Breaker Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Co-operative

Central Government/Public Sector