Latest breather Tenders | Government breather Tenders

Central Government And Public Sector

CTN :45736809

09 Jul, 2026 NA

Guwahati - Assam

Tender For supply of lv box breather for vande bharat (containing 1 nos of air dryer small jst article no-106820 8r 000) or latest. [ warranty period: 30 months after the date of delivery ] ]

CTN :45416452

22 Jul, 2026 2.42 Crore

Rohtak - Haryana

Tender For corrigendum : rate contract for 02 years( extendable) for purchase of various types of consumables for department of aneaesthesiology, pgims, rohtak- heat & moisture exchange filters (hmef): hepa bacterial and viral fi with hme properties offering optimum hydrophobic filtration performance. gas sampl port, for end tidal co2 monitoring. recommended tidal volume range 150-1200ml.ev pleated filter medium to allow maximum filtration efficiency with minimal resistance flow. low dead space, not more than 45-55 ml. single use, sterile ece/usfda/iso/ , heat&moisture exchangers (hme) filter for pediatric us , recommended tidal volume <600ml.low weight. low dead space. suitable for b ventilated and spontaneously breathing patients. low resistance to flow. corrugated pa medium with high efficiency to recover about 75% of the energy and moisture. single sterile. ece/usfda/iso , heat & moisture exchangers (hme) for spontaneous breathing in tracheostomized patients. suction port to allows access to suct , catheter. clear housing to allow visualization of contamination. integrated oxygen port allow delivery of supplemental oxygen. recommended tidal volume range from 1000ml.compact and lightweight. corrugated paper medium device can be used fo maximum period of 24 hours. single use sterile. minimum resistance anti occlus mechanism. ece/usfda/iso , epidural set. a set containing tuohy's epidural needle minimum length 80m 16g, 17g and 18g, and corresponding gauge epidural catheter with closed tip and th lateral eye, length 90-100 cm and flat filters 0.2 micrometer hydrophilic two way, fill area approx 4.91 cm², priming volume 0.75 ml all connections should be of luer lock ty lor(loss of resistance) syringe, presterilized. ece marked/usfda approved , combined spinal epidural set. containing 18 g touhy epidural needle minimum 80 mm length. pencil point, spinal needle with twist lock system, marking tuohy's needle hub and depth marking on tuohy's needle hub containing correspond clear catheter with connection, closed end and 3 lateral eye of approx. length 90-100 with epidural filter 0.2 micrometer hydrophilic two way, epidural sponge and lor (loss resistance) syringe. ece marked/usfda approved - , needle for spinal anaesthesia, quincke type, same colour coding the hub and stylet, presterilized. usfda and europen ce approved- , (a) 23 g, 90mm length od approx 0.64 mm, , (b) 24g,90mm length od approx 0.5mm with/without introducer , (c) 25g, 90 mm , (d) 26g, 90 mm , (e) 27g, 90mm , paed. spinal needle without introducer, colour coded length 50mm, g, od 0.5 mm, presterilized. usfda and europen ce approved , cuff manometer: allows controlled initial cuff inflation. intermittent press monitoring facility. instant visual confirmation of intra-cuff pressure. simple operation pressure adjustment without need for disconnection or introduction of syringe into syst solid green zone indicates usual cuff pressure range for tracheal & tracheosto tubes.connecting tube is supplied with the gauge for convenient positioning. portable ga and clips easily into pocket. , face mask- clear, reusable, pvc material, transparent for good visibil adjustable cushion for better comfort. , sizes:- , a) 0, , b) 1, , c) 2, , d) 3,0) 4,1) 5- , anatomical facemask made up of antistatic inflating pad, malleable, anatom. chaned to give precise seal and fit comfortably, sizes 1.2.3.4 , disposable lma with preformed curve 90 degree like ilma with airwa tube with standard connectors for anaesthesia circuit. us fda approved. sizes 1, 1.5,2, 2.5,3,4,5 , resuable pressure infusion bag for administration of fluid to patient unde pressure, compatible with 500 ml fluid bags, flexible, stury, pvc tubing and manometer stop cock and hand pump, latex free , clear pressure- monitoring lines, which can withstand pressure up to 500 psi with minimal damping, non kinkable, pre-sterilized, disposable, id/ed1/2 mm. length 100 cm, 150cm & 200 cm. low dead space but pe may be optional

Central Government/Public Sector

CTN :45736159

09 Jul, 2026 NA

Hubli - Karnataka

Tender For supply of breather for gear case consisting of inner cap (ref.1) and outer cap(ref.2)as per scr drawing no. c/els/lgd/bogie/3/148 [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45547956

28 Jul, 2026 NA

Rewa - Madhya Pradesh

Tender For corrigendum : supply of set of breather plug assembly of brake caliper unit for vande bharat train set make- knorr bremse one set consist of 3 items-(1) filter element kbi part no- a64328/4 (2) protective cap kbi part no- b66347/2 (3) filter fitting kbi part no- b66346/1 [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45743966

28 Jul, 2026 NA

Rewa - Madhya Pradesh

Tender For supply of set of breather plug assembly of brake caliper unit for vande bharat train set make- knorr bremse one set consist of 3 items-(1) filter element kbi part no- a64328/4 (2) protective cap kbi part no- b66347/2 (3) filter fitting kbi part no- b66346/1 [ warranty period: 30 months after the date of delivery ] ]

CTN :44846082

02 Jul, 2026 23.53 Lacs

Barmer - Rajasthan

Tender For bid to ras supply of circlip, cs, 13 mm x 1 mm , external circlip, cs, 14 mm x 1 mm , external circlip, cs, 15 mm x 1 mm , external circlip, cs, 16 mm x 1 mm , external circlip, cs, 17 mm x 1 mm , external circlip, cs, 18 mm x 1.2 mm , external circlip, cs, 19 mm x 1.2 mm , external circlip, cs, 20 mm x 1.2 mm , external circlip, cs, 21 mm x 1.2 mm , external circlip, cs, 22 mm x 1.2 mm , external circlip, cs, 24 mm x 1.2 mm , external circlip, cs, 25 mm x 1.2 mm , external circlip, cs, 26 mm x 1.2 mm , external circlip, cs, 28 mm x 1.5 mm , external circlip, cs, 30 mm x 1.5 mm , external circlip, cs, 32 mm x 1.5 mm , external circlip, cs, 34 mm x 1.5 mm , external circlip, cs, 35 mm x 1.5 mm , external circlip, cs, 36 mm x 1.75 mm , external circlip, cs, 38 mm x 1.75 mm , external circlip, cs, 40 mm x 1.75 mm , external circlip, cs, 42 mm x 1.75 mm , external circlip, cs, 45 mm x 1.75 mm , external circlip, cs, 47 mm x 1.75 mm , external circlip, cs, 48 mm x 1.75 mm , external circlip, cs, 50 mm x 2 mm , external circlip, cs, 52 mm x 2 mm , external circlip, cs, 55 mm x 2 mm , external circlip, cs, 58 mm x 2 mm , external circlip, cs, 60 mm x 2 mm , external circlip, cs, 62 mm x 2 mm , external circlip, cs, 65 mm x 2.5 mm , external circlip, cs, 68 mm x 2.5 mm , external circlip, cs, 70 mm x 2.5 mm , external circlip, cs, 72 mm x 2.5 mm , external circlip, cs, 75 mm x 2.5 mm , external circlip, cs, 78 mm x 2.5 mm , external circlip, cs, 80 mm x 2.5 mm , external circlip, cs, 82 mm x 2.5 mm , external circlip, cs, 85 mm x 3 mm , external circlip, cs, 90 mm x 3 mm , external circlip, cs, 95 mm x 3 mm , external circlip, cs, 100 mm x 3 mm , external circlip, cs, 105 mm x 4 mm , external circlip, cs, 110 mm x 4 mm , external circlip, cs, 115 mm x 4 mm , external circlip, cs, 120 mm x 4 mm , external circlip, cs, 125 mm x 4 mm , internal circlip, cs, 10 mm x 1 mm , internal circlip, cs, 11 mm x 1 mm , internal circlip, cs, 12 mm x 1 mm , internal circlip, cs, 13 mm x 1 mm , internal circlip, cs, 14 mm x 1 mm , internal circlip, cs, 15 mm x 1 mm , internal circlip, cs, 16 mm x 1 mm , internal circlip, cs, 17 mm x 1 mm , internal circlip, cs, 18 mm x 1 mm , internal circlip, cs, 19 mm x 1 mm , internal circlip, cs, 20 mm x 1 mm , internal circlip, cs, 21 mm x 1 mm , internal circlip, cs, 22 mm x 1 mm , internal circlip, cs, 24 mm x 1.2 mm , internal circlip, cs, 25 mm x 1.2 mm , internal circlip, cs, 26 mm x 1.2 mm , internal circlip, cs, 28 mm x 1.2 mm , internal circlip, cs, 30 mm x 1.2 mm , internal circlip, cs, 32 mm x 1.2 mm , internal circlip, cs, 34 mm x 1.5 mm , internal circlip, cs, 35 mm x 1.5 mm , internal circlip, cs, 36 mm x 1.5 mm , internal circlip, cs, 38 mm x 1.5 mm , internal circlip, cs, 40 mm x 1.75 mm , internal circlip, cs, 42 mm x 1.75 mm , internal circlip, cs, 45 mm x 1.75 mm , internal circlip, cs, 47 mm x 1.75 mm , internal circlip, cs, 48 mm x 1.75 mm , internal circlip, cs, 50 mm x 2 mm , internal circlip, cs, 52 mm x 2 mm , internal circlip, cs, 55 mm x 2 mm , internal circlip, cs, 58 mm x 2 mm , internal circlip, cs, 60 mm x 2 mm , internal circlip, cs, 62 mm x 2 mm , internal circlip, cs, 65 mm x 2.5 mm , internal circlip, cs, 68 mm x 2.5 mm , internal circlip, cs, 70 mm x 2.5 mm , internal circlip, cs, 72 mm x 2.5 mm , internal circlip, cs, 75 mm x 2.5 mm , internal circlip, cs, 78 mm x 2.5 mm , internal circlip, cs, 80 mm x 2.5 mm , internal circlip, cs, 82 mm x 2.5 mm , internal circlip, cs, 85 mm x 3 mm , internal circlip, cs, 90 mm x 3 mm , internal circlip, cs, 95 mm x 3 mm , internal circlip, cs, 100 mm x 3 mm , internal circlip, cs, 105 mm x 4 mm , internal circlip, cs, 110 mm x 4 mm , internal circlip, cs, 115 mm x 4 mm , internal circlip, cs, 120 mm x 4 mm , internal circlip, cs, 125 mm x 4 mm , //bid details 2 / 106 internal circlip, cs, 140 mm x 4 mm , internal circlip, cs, 160 mm x 4 mm , breather moc g.i size 1 inch , breather moc g.i, size 0.5 inch , breather moc g.i,size 0.75 inch , br

Central Government/Public Sector

CTN :45732208

06 Jul, 2026 NA

Erode - Tamil Nadu

Tender For supply of breather for wag-9 gear case as per clw drg.no.1209-01-313-020. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45730187

16 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of stopper clamp for breather of gear case of wap-7 locos as per drg. no. 4tacp7ma-05. 01 setconsist of 02 items-01 no. each. material specification- is 2062. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45731392

09 Jul, 2026 NA

Kanpur - Uttar Pradesh

Tender For sealing plate (gasket) for gear case breather for three phase locomotives as per clw drg. no. 1209-01.411-038, alt.1. note: one sample to be got approved before bulk supply. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45566054

02 Jul, 2026 NA

Darjeeling - West Bengal

Tender For bid to ras corrigendum : supply of house assy , f house , house water , house , o ring , clamp house , house air cleaner , house clamp , house elbow , gasket , air cleaner , element inter , element outer , dip stick , fuel filter , cap vandalism , air breather assy , house fuel supply , house fuel drain , nut , by pass filter , element filter , instrument panel , ammeter , wire harness , cable assy , clamp , screw , foot dimmer switch , grommet , pressure switch , terminal batery , cap small , head lamp , turn singhle lamp , fuse box

Breather Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector