Latest bridge slab Tenders | Government bridge slab Tenders

CTN :39651890

16 May, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of integrated bridge system 23vmac902 - lcd dispaly 25.5 , vmft processor , controlpanel (basic+io)kit , pc i/o unit-standard compass , pcb assy scan converter 3 , system dongle/vision master usb system key , tidal software for mfc with 1 year license , mfc console carcass , multifunction display 10.4 , power adaptor , ip66 enclosure for mfd s , vmft processor , radar combiner unit , radar switchover module , ruggedized laptop for pou , lan sockets for pou , obd hanging head unit , obd pull down mounting arm , obd navigation interface unit , obd navigation interface unit , obd connection unit , power supply , network switch , sfp interface module , power supply , gateway switch , rugged panel pc , ups 3kva , marine filter , ebm tower for 3kva , nmea switcher / buffer , dm100 vdr 52 dau , mk4 capsule with cradle , bridge control panel , bridge microphone indoor , bridge microphone outdoor , installation kit for dm100 , installation kit for mk1 float free , aub 90 beacon kit , mk2 float free capsule un3091 , fully regulated , remote audio interface rai 08-001 (poe) , 8ch audio , compact sensor interfcae unit kit , 8ch analog , network attached storage nas 01-001 3.8tb , button replacement kit , fuse 5 a(set of 10) , fuse 3.15a(set of 10) , hdd loaded with software , rj 45 connectors , network patch cord 3mtr , cable assy. on/off switch , cable-ps/2 , battery for obd , mfd i/f unit , graphic card , on/off switch , ups power db 230v , power cable 2 x 1.5 sqmm , data cable 1 x 2 x 0.75 sqmm , data cable 4 x 2 x 0.75 sqmm , coaxial cable rg 59 , data cable 2 x 2 x 0.75 sqmm , lan cable ( cat 7) , power cable (3 x 2.5sqmm) , training charges as per 1 (ae) of atc , type testing charges (if any)

Central Government / Public Sector

CTN :40004319

08 May, 2025 NA

Digboi - Assam

Tender For corrigendum : supply of rockwell automation make ecs system spares - control logix control net module , 1794-acnr15 i o comm.module rockwell , 85-256v ac power supply,cat no.1756-pa72 , o p mod,16 point 24v dc,p n,1756 ob16d , cl 1756-ob16i a dcout-isol q01 module , 1794-ie8 analog i p mod 8 ch rockwell , 1794-ob16 o p module 16 ch.rockwell , flex 32 chann digital input p n1794-ib32 , 7 slot contrologix chassis 1756-a7 , controllogix 4 mb controller,1756-l72 , redundancy enhcd. module p n,1756-rm2 , 4 slot chassis, catalog no. 1756 - a4 , 1756-a10k control logix 10 slots chassis , ab pwr.sup-1756-psca2 a , vac redundant power supply,1756-pa75r , controllogix 5570 1756-l71 , redundancy module cable,1756-rmc1 , ethernet dual port module p n,1756-en2tr , ethernet bridge module,1756-en2t , 12 channel ai module part no 1794-ie12 , 36 pin screw clamp block,p n,1756-tbch , ai module - rtd 1794-ir8 , 1794-ob32p o p module 32 ch rockwell , 1794-ib16 ip module 16 ch.rockwell , 1786-xt end terminator rockwell , analog input modul 4-20ma,p n,1756-if16k , controlnet t-tap straight,cat no1786-tps , stratix 5700 switch p n,1783-bms20cl , 13 slot controllogix chassis , 17 slot controllogix chassis , flex terminal base p n 1794-tb32 , cosel s,ad480-24,smps,allen bradley , power monitor 3000

State Government

CTN :40162210

12 May, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of c.i./c.s casted item - c.i. casted items on new basis, c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.

State Government

CTN :40166682

09 May, 2025 2.58 Lacs

Darjeeling - West Bengal

Tender For supply and installation of pv module street lights at namsu bridge ,namsu under duptin g.p. mirik

Co-operative

CTN :40120374

12 May, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For c s item on conversion supply basis and forged steel item - c.s coupling having material as per is:1030 grade 280-520w for mill size 30"x60" as per drg. supply basis, conversion basis, machining charge, cast steel crown pinion having material is:2708 grade-iii-b for mill size 30"x 60" as per drg.supply basis, conversion basis, machining charge, c.s.trash plate having material as per is:1030 and grade-iii-b supply basis, conversion basis, machining charge, teeth cutting/grooving of trash plate as per drg., c.s.trash beam as per is-1030/is 2708 as per drg.supply basis, conversion basis, machining charge, forge steel tail bar for taxmaco and kcp mill having material c-40/8 as per drg. mh- 6 & mh-56supply basis, conversion basis, forge steel pinion for transmission gear of taxmaco mill as per drg. no. mh 39,material en-24,tensile strength70-80 kg./sqcm, hardness 200-220 bhn, c.s.bearing housing for taxmaco mill as per deg no mh-17-c/04 side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-17-b side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-17-b top roller housingsupply basis, conversion basis, c.s.gear coupling for c/f machine as per drg.no.bh-14 (duly case hardness), c.s. pinion for cane unloader as per drg, cu- 16teeth-17, teeth -18, c.s.sprocket 2" pitch (both pilot bore)(i) no of teeth 18 , boss dia 3", (ii) no of teeth 36 , boss dia 6", c.s.sprocket for boiler rotary feeder as per drg.blr-73/1 pitch- 25.0 mm,no of teeth 21, od -180mm. p.b -25 mm, c.s.sprocket for bagasse elevator (pilot bore) as per drg.mh-75 pitch 50.8 mm,no of teeth 50, od 842.70mm. pcd 808.7mm,teeth thickness 28mm , boss- 270x130 mm, cs sprocket (pilot bore ) as per drg.blr-62 pitch 50.8 mm, no.of teeth-14 pcd 226.49mm,od 258.8mm, static coller of 25 mm thick duly hard faced of 5 mm thick layer . total thick 30 mm after hard facing for taxmaco & kcp mill as per drawing no. mm 105(i) m.s. material, (ii) c.s.material, sprocket of inter carrier od 280 mm,no.of teeth 45.pitch 19.5 mm, c.s. sprocket (duplex) for enter carrier teeth 12, as per drg. mh-72/sample, s.s. wear plate is 304 quality (i) length 435 mm x width 370 mm x thick 15 mm, (ii) length 385 mm x width 330 mm x thick 15 mm, c.s.tresh beam bracket as per sample /drg., c.s.eccentric pin trash bar adjusting device as per drg. mh-133/2024-25, c.s. trash beam adjusting connecting rod for taxmaco mill, as per drg. mh- 297, c.s. bridge wheel for cane unloader as per drg. cu25 (1),, trolly wheel for cane unloader as per sample /drg., pinion gear set for cane unloader as per sample /drg, c.s. pinion (gear) for rbc cross carrier pitch 41 mm. teeth 25 , type of teeth in valute (spur) module 12.7 mm width 125 mm .od 343 mm, bore 2" dia as per drg., clutch shaft for mill. as per drg. mh-76 , en-8for taxmaco mill -sl.no.2, for kcp mill - sl.no.1, cs worm for crystilizer wheel od 290 mm, bore 81 mm.pitch 80 mm complete, groving of c.s. trash plate as per drg., idler wheel gear for cane unloader., no of teeth 68, od-420 mm, module-6, pitch- 18.84 mm, pcd-408 mm, as per drg. no. cu-25 (i), pinion for cane unloader no. of teeth- 33, od-212 mm, pcd-198 mm, pitch- 18.84 mm, module-6 as per drg. no., pinion for cane unloader no. of teeth- 18, od-200 mm, pitch- 35 mm, bore- 50 mm, width-115 mm, module-6, teeth depth-25 mm as per drg. no., break stand complete for cane unloader, size-10", cs sprocket of rbc, nos of teeth 12, as per drg. blr 32/93, chain sprocket for inter carrier clucth shaft, od 280, pcd 270, bore 108, root dia 260, nos of teeth 45, nos of hole 4, as per drg. 001, pinion for transmission gear kcp mill, material en-24(as per drawing no. mh-95/2024-25), c.s. helical teeth pinion, teeth-20, od-60, bore-26, pitch-10(as per drawing no. bh-rg-05/2024-25), c.s. helical teeth pinion, teeth-17, od-62, bore-28, pitch-13(as per drawing no. bh-rg-04/2024-25), chief engineer

Central Government/Public Sector

CTN :40118491

15 May, 2025 NA

Thiruvananthapuram - Kerala

Tender For supply of dual channel differential isolated gate driver 1200 v bm2 sic half-bridge module companion tool , 2-channel differential transceiver

Bridge Slab Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

State Government

State Government

Co-operative

Central Government/Public Sector