Latest brinell hardness testing machine Tenders | Government brinell hardness testing machine Tenders

CTN :45671759

01 Jul, 2026 55.80 Lacs

Bhiwandi - Maharashtra

Tender For providing and supplying spare parts for all type of borewell as per requirement in b.n.c.m.c. area 2026-2027 - providing and supplying spare parts for all type of borewell as per requirment in bncmc area 2026-2027, :item no. 1 : providing and laying in trenches following mm dia. medium grade having embossed as isi mark galvanised iron pipes ?of kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats including removing existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed etc. complete. pwd ssr 2022-2023 pg no 268 41.20,41.21 25 mm dia, 32mm dia, item no. 2 : providing and supplying blue mdpe pipes conforming to iso 4427:1996 manufactured from virgin resin pe 80 food grade compounded raw material having blue colour only with quality assurance certificate from quality agencies like wrc / cipet (india) / dvgm / kiwa / spgn etc. for usage in drinking water system. the cost shall include testing of all materials, inspection charges, transportation up to store, transit insurance, loading, as specified and directed, unloading,stacking excluding gst levied by goi & gom in all respect, etc. complete as specified and directed.mjp dsr 2023-24 pg no 128/1/b 25 mm dia, 50 mm dia, item no 3 providing, erecting and giving test of centrifugal monoblock pump set conforming to is 9079 operating at 2900 rpm with ci impeller, priming funnel, cock, suitable flanges at suction and delivery side. pump shall have common shaft for pump and motor. motor shall be suitable for working on 415 v 10%, 3 ph, 50 hz a.c. supply. motor shall be tefc type. pump set shall be suitable for working at various discharge and head requirements. pump shall be erected on provided c.c. foundation block with suitable foundation bolts grouted in c.c. foundation block.centrifugal monoblock pump set (single stage) mjp mech.csr 2023-24 pg no 5 pm 2-1-5] 10 hp, item no 4 : supplying and erecting submersible pump 150 mm dia (with bronze / stainless steel (cf8m) impeller) up to 8 stages mjp mech.csr 2023-24 pg no 01 pm 1-2-1,pm 1-2-2] 1.5 hp, 2.0 hp, item no 5 supplying & erecting pressure booster pump, single phase, 50c/s, a.c.supply of 0.75 kw/ 1 h.p., with discharge of 480 to 13 lpm for 10 to 50 mtrhead & 25 mm suction/ 25 mm delivery pipe, for domestic pressure boosting applications pwd ele csr 2022-2023 pg no 206 12-6-2, item no 6 supplying & erecting pressure booster pump, single phase, 50c/s, a.c.supply of 0.375 kw/ 0.5 h.p., with discharge of 120 to 12 lpm for 10 to 40mtr head & 25 mm suction/ 25 mm delivery pipe, for domestic pressure boosting applications. pwd ele csr 2022-2023 pg no 206 12-6-1, item no. 7 supplying & erecting automatic control panel for 1 ph, 230 volt, a.c. submersible/centrifugal pump set up to 3 hp consisting of dol starter of suitable relay range s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. pwd ele csr 2022-2023 pg no 220 12-4-20, item no.8 supplying & erecting automatic control panel for 3 phase , 415 volt, a.c, submersible/centrifugal pump set up to 7.5 hp consisting of dol starter having relay range 9-14 amp,s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. control panel should offer single phasing, phase reversal, phase imbalance etc .pwd ele csr 2022-2023 pg no 204 12-4-17, item no. 9 supplying and erecting d.o.l. starter 400v. 3 phase, 50cycles with no volt coil and overload element with necessarymaterials and connected to supply for 10 h.p., item no 10 supplying & erecting flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.pwd ele csr 2022-2023 pg no 220 12-4-8, item no. 11 supplying, erecting & terminatin

CTN :45616045

17 Jul, 2026 NA

Bareli - Madhya Pradesh

Tender For supply, installation, commissioning and proving out of brinell hardness testing machine as per attached specification section-i and ii [ warranty period: 30 months after the date of delivery ] ]

CTN :45587690

01 Jul, 2026 NA

Hooghly - West Bengal

Tender For supply, installation, commissioned and training of brinell hardness testing machine

Central Government/Public Sector

CTN :45550595

23 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of others - 1- scrap automatic multispecimen grinder machine (mlb-119) with one electric moters and non ferrous attachment, qty-01 nos (approximate- 0.35 mt), 2-scrap computrized brinell hardness testing machine (mlb-118) make-fasne yoi 2010 with one electric moters and non ferrous attachment, qty-01 nos (approximate-0.35 mt).note-1-loading by purchaser. 2-cutting and dismantling allowed. 3- removel of whole lot. 4-delivery not allowed against part payment custodian-sse-mts-rsw-cb-lko, location-lying at rsw-cb-lko in main lab. ref-awm/plant/rsw/cb/lko letter no-mt/01/m &p/cond/disposal/2025 dated-17.12.2025

CTN :45446648

15 Jun, 2026 NA

Theni - Tamil Nadu

Tender For refer tender notice - purchase of non consumable item in material testing lab for civil department - torsion testing machine (code e006)function: conducts torsion and twist tests on materials. such as metal wires, tubes, and sheetstorque measurement : pendulum dynamometer systemtorque application : geared motor through a gearboxtorque range : adjustablematerial tested :metal wires, tubes, sheet materialsfloor-mounted electromechanical type,230 v ac, 50 hz power supply,digital display, sand replacement test apparatus (or) core cutter devices(code e014)metal tray / base platesquare metal tray with a central hole (e.g., 300 mm 300 mm with 100 mm hole).another common size: 450 mm square, 50 mm deep with 200 mm central hole for larger kits seamless steel cylinder with no sharp edges.common size: 100 mm internal diameter, 127 175 mm length (varies by kit). mkpequipments.com +1wall thickness ~3 mm (industrial products), total station with all accessories(code e022)leica flexline ts10 reflectorless total station angle accuracy: 1 5 (smaller values = higher precision). magnification: ~28x 30x optical zoom. distance range:with prism: 2,000 m 6,000 m+reflectorless: 600 m 2,000 m typical. battery backup: ~12 36 hrs field operation., rockwell cum brinell hardness testing machine with intentor set box(code e031)min initial test force :10kgf, total test force range : 60kgf,100kgf,150 kgf, max. height of specimen :215 mmmin distance from indenter center tomachine wall :132 mm accessories:steel ballpreferred indentor 1/16" preferred steel ball: 1/16"and with all standard accessories to run the machine

CTN :45343668

11 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of equipments for materials testing lab for civil department - spring testing machineload & displacement sensing load cell capacity: 0 10 kn accuracy: 1% fs (better if 0.5%fs) displacement sensor lvdt / digital encoder accuracy: 0.5 mmmachine design frame: rigid steel frame with crosshead movement type: mechanical screw with hand wheel (simple & robust) or electromechanical actuator (for smoother, controlled motion) crosshead travel: ~150 200 mm safety guards: transparent shields around moving partsfixtures & accessoriesspring testing compression plates (ground & parallel) tension hooks / eyelets for extension springs set of spacers / adapters for small springs tensile testing standard tensile grips wedge or screw type calibration certificate for load cell standards complianceensure compliance with basic material test standards such as: astm e4 / iso 7500-1 calibration of force measurement astm e8 / iso 6892 tensile performance & accuracy load accuracy: 1% fs displacement accuracy: 0.5% repeatability: 0.5%, rockwell cum brinell hardness testing machine min initial test force :10kgf, total test force range : 60kgf,100kgf,150 kgf, max. height of specimen :215 mmmin distance from indenter center tomachine wall :132 mm accessories : steel ballpreferred indentor 1/16" preferred steel ball: 1/16"and with all standard accessories to run the machine, direct shear machinestandard compliance:the equipment shall confirm to bureau of indian standards is 2720 (part 13) and equivalent astm international astm d3080.technical specifications:shear box size: 60 mm 60 mm 25 mm specimen size (complete with grid plates, porous stones, and specimen cutter).normal load capacity:minimum 5 kn with loading yoke and calibrated loading hanger set.shear load capacity:minimum 2.5 kn or 5 kn with calibrated proving ring (with calibration certificate).rate of strain (shear displacement):variable speed drive with controlled displacement ranging from 0.01 mm/min to 1.25 mm/min (motorised model preferred for uniform rate control).displacement measurement:horizontal displacement dial gauge: 0.01 mm least countvertical displacement dial gauge: 0.002 mm or 0.01 mm least countloading frame:rigid, heavy-duty loading frame with corrosion-resistant finish.drive system:motorised with single phase 220 230 v, 50 hz power supply.accessories (to be supplied complete):shear box assembly, proving ring with calibration chart, two dial gaugesloading weights and hanger, porous stones (2 nos.), specimen cutter, tool kit, flow table test apparatusdimensions and specifications as per is 9103, table top made from flat metal plate, minimm thickness 1.5 mm. table top size: 700 mm 700 mm, with flatness tolerance of 1.5 mm. table top marked with: scribed cross at centre, lines parallel to table edges and central circle of 200 mm diameter underside of table top reinforced to prevent distortion. total mass of table top: 16 1 kg. table top, base frame front and upper stops provided as per is 9103. lower front edge fitted with two rigid stops to transfer load directly to base frame. base frame designed to transfer impact load directly to supporting surface, minimizing bounce. stop watch digital - 2 nos scale 1 mtr 2 nos mounting wooden platform 300 mm height amc for 3 years inclusive.

CTN :45340411

04 Jun, 2026 NA

Theni - Tamil Nadu

Tender For purchase of non consumable item in material testing lab for civil department - torsion testing machine (code e006)function: conducts torsion and twist tests on materials. such as metal wires, tubes, and sheetstorque measurement : pendulum dynamometer systemtorque application : geared motor through a gearboxtorque range : adjustablematerial tested :metal wires, tubes, sheet materialsfloor-mounted electromechanical type,230 v ac, 50 hz power supply,digital display, sand replacement test apparatus (or) core cutter devices(code e014)metal tray / base platesquare metal tray with a central hole (e.g., 300 mm 300 mm with 100 mm hole).another common size: 450 mm square, 50 mm deep with 200 mm central hole for larger kits seamless steel cylinder with no sharp edges.common size: 100 mm internal diameter, 127 175 mm length (varies by kit). mkpequipments.com +1wall thickness ~3 mm (industrial products), total station with all accessories(code e022)leica flexline ts10 reflectorless total station angle accuracy: 1 5 (smaller values = higher precision). magnification: ~28x 30x optical zoom. distance range:with prism: 2,000 m 6,000 m+reflectorless: 600 m 2,000 m typical. battery backup: ~12 36 hrs field operation., rockwell cum brinell hardness testing machine with intentor set box(code e031)min initial test force :10kgf, total test force range : 60kgf,100kgf,150 kgf, max. height of specimen :215 mmmin distance from indenter center tomachine wall :132 mm accessories:steel ballpreferred indentor 1/16" preferred steel ball: 1/16"and with all standard accessories to run the machine

Central Government/Public Sector

CTN :45019260

06 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot miscellaneous scrap - 1- scrap automatic multispecimen grinder machine (mlb-119) with one electric moters and non ferrous attachment, qty-01 nos (approximate- 0.35 mt), 2-scrap computrized brinell hardness testing machine (mlb-118) make-fasne yoi 2010 with one electric moters and non ferrous attachment, qty-01 nos (approximate-0.35 mt),note-1-loading by purchaser. 2-cutting and dismantling allowed. 3- removel of whole lot. 4-delivery not allowed against part payment custodian-sse-mts-rsw-cb-lko, location-lying at rsw-cb-lko in main lab. ref-awm/plant/rsw/cb/lko letter no-mt/01/m &p/cond/disposal/2025 dated-17.12.2025

Central Government/Public Sector

CTN :45019318

05 May, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot miscellaneous scrap - ubl/gsd/0256/motors/26/a [pl no.98411214] condemned and un-serviceable motors scarp consisting of different tyes of motors a)released hoist electric of various capacity -05nos [sl.no.01m&p no:a0941/060031493(2t) 2.m&p no:a0942/060031494 (2t) hoist machine without motor 3.m&p no:a0957/060031507(1t) 4.m&p no:a0958/060031508(1t) 5.m&p no:a0968/060031518(0.5t)]b)released brinell hardness testing machine -01nos(sl no 2k7/09 mp no0717/040047398) c)released engraving machine -01nos(sl.no3883 mp no 9020/050039089) all motors with/with out ms/nfs attachment. available under the custody of cdms/rs ward/gsd/ubl. note: bidder has to physically inspect the lot before bidding. loading allowed by jcb/crane location:- road no 2, gsd/ubl bin no- 0256. remarks-. delivery should start from one end. no pick and choose allowed.

Central Government/Public Sector

CTN :44882312

21 Apr, 2026 NA

Multi City - Karnataka

Tender For corrigendum : auction sale of depot miscellaneous scrap - ubl/gsd/0256/motors/26/a [pl no.98411214] condemned and un-serviceable motors scarp consisting os different tyes of motors a)released hoist electric of various capacity -05 nos(0.5 ton-01nos,01ton-02nos,02ton-02nos)(some hoist machines without motors) b)released brinell hardness testing machine -01nos(sl no 2k7/09 mp no0717/040047398) c)released engraving machine -01nos(sl.no3883 mp no 9020/050039089) all motors with/with out ms/nfs attachment.(some of motors are in open condition) available under the custody of cdms/rs ward/gsd/ubl. note: bidder has to physically inspect the lot before bidding. location:- road no 2, gsd/ubl bin no- 0256. remarks-. delivery should start from one end. no pick and choose allowed

Brinell Hardness Testing Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector