Latest bronze bush Tenders | Government bronze bush Tenders

State Government

CTN :45540331

04 Jul, 2026 27.09 Lacs

Mumbai - Maharashtra

Tender For annual rate contract for the procurement of bronze bush for bogie of rst mumbai monorail

Central Government/Public Sector

CTN :45512317

02 Jul, 2026 NA

East Singhbhum - Jharkhand

Tender For pin link stabilizer cylinder 5558747000 drg no 2251 , pin lift cylinder 5564051600 drg no 2252 , pin link stablizer cylinder 5552573600 drg no 2056 , bronze bushing for lift cylinder 5502900200 drg no 2070 , pin lift cylinder 5558735800 drg no 2071 , insert bushing 5564213400 drg no 2085

Central Government And Public Sector

CTN :45470996

12 Jun, 2026 NA

Bengaluru - Karnataka

Tender For supply of bronze bush for sprocket to wap drg no wh 2131115-3 for flight roller conveyors. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45398776

04 Jun, 2026 NA

East Nimar - Madhya Pradesh

Tender For enquiry for procurement of various size bronze bushes for pt sludge transfer pump and waste water backwash transfer pump for tmd off site, at 2x660mw sstpp, stage-ii mppgcl, dongalia

Central Government/Public Sector

CTN :45406407

12 Jun, 2026 NA

Jalandhar - Punjab

Tender For supply of refrigerant r 134a gas , oil cooler pipe , oil filter , primary fuel filter , secondary fuel filter , bronze bush , fuel pump assy , fuel filter

Central Government / Public Sector

CTN :45384040

09 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132606 017 pl no 98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis), scrap of cond. & u/s. 8 wheeler , boxnhs m1, , bcn m1, bobrn m1 , boxn m1 ,wagons available on rails. 1) nfr boxnhs m1 12059609882,2) cr bcn m1 30019160198 , 3) cr bcn m1 30019160730,4) er bobrn m1 72029562814, 5) ser boxn m1 10079660845. location road no. 1 at dump yard. rc items: . 1 .coupler bodies (nt), 2 .yokes 3 .knuckles, 4.draft gears, 5.striker castings (nt), 6.centre pivots, 7. casnub bogies with all fittings, 8 . casnub bogies without all fittings, 9.break cylinder 355, 10. auxiliary reservoir 100, 11. distributer valve 12. cp pb with control reservoir 13. sab, 14) boxn doors 15. yoke pin support (1st plate), 16. safety plate with anchor plate (2n d plate), 17. yoke support plate(3rdplate), 18. yoke pin 19. draft gear follower . 20 knuckle pin. 21. knuckle thrower.22.cut of angle cock. 23. bcn swing, 24. bcn flap, 25. bronze bushes ds8 no : 0999603017 dt: 30 .05 .25. note to purchaser : before delivery of wagon cut off parts, the declared rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 56.793 mt sold on number basis only delivery in cutoff parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos

Central Government / Public Sector

CTN :45384042

09 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132606 020 pl no 98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis), scrap of cond. & u/s. 8 wheeler , boxnr , boxn m1, boxnha m1 , wagons available on rails. 1) scr boxnha m1 10099637117 , 2) ser boxnr 25079560408 , 3) er bobrn m1 72029463111,4 ) wr boxnr 25089660303 , 5) cr boxn m1 10019660997. location road no. 1 at dump yard. rc items: . 1 .coupler bodies (nt), 2 .yokes 3 .knuckles, 4.draft gears, 5.striker castings (nt), 6.centre pivots, 7. casnub bogies with all fittings, 8. casnub bogies without all fittings, 9.break cylinder 355, 10. auxiliary reservoir 100, 11.sab 12) boxn doors 13. yoke pin support (1st plate), 14. safety plate with anchor plate (2n d plate), 15. yoke support plate(3rdplate), 16. yoke pin 17. draft gear follower . 18 knuckle pin. 19. knuckle thrower. 20.cut of angle cock.21. bronze bushes ds8 no : 0999603020 dt: 30 .05 .25. note to purchaser : before delivery of wagon cut off parts, the declared rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 46.507 (m.s 37.989, ss-8.518) mt sold on number basis only delivery in cutoff parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos

Central Government And Public Sector

CTN :45395465

05 Jun, 2026 NA

Bengaluru - Karnataka

Tender For supply of bronze bush for sprocket to wap drg no wh 2131115-3 for flight roller conveyors. [ warranty period: 30 months after the date of delivery ] ]

CTN :41273530

03 Jun, 2026 NA

Khammam-T - Telangana

Tender For bid to ras corrigendum : supply of phosphorous bronze bushes for hinge pin as per enclosed drg no hwpm mu 27 rev 02 , suspension bolt and pin set each set consists of 5 items as per enclosed drg no hwpm mu 19 rev 01

CTN :45346400

22 Jun, 2026 NA

Pondicherry - Pondicherry

Tender For rate contract for supply of consumables and non-consumables for the department of central workshop, puducherry – 605 006 - terms and conditions: 1. for non-consumable items, the brand name should be mentioned for each item. those quotations without brand name will be rejected. 2. the items should be door-delivered to the department of central workshop without any charge (loading / unloading charge, etc.) 3. the expiry date of consumables should not be less than one year after the date of supply. 4. price quoted should be inclusive of gst. 5. the firm should provide warranty for 1 year for the non-consumable items. general section, aluminium sheet 16 swg 8x4 length (isi), m.s.sheet 20g (isi) 8x4 length, m.s.sheet 18g (isi) 8x4 length, m.s.sheet 10g (isi) 8x4 length, m.s.sheet 16g (isi) 8x4 length, steel almirah thread type handle with washer & nut isi marked, godrej push type steel almirah handle, steel almirah locks & key branded make, steel alimarak godrej lock with key branded make, steel alimarah handle inside fix gun metal with brass revit square type, lock with key for steel table isi marked, drawer handle for steel table, stainless steel wire 8swg (length 20ft), stainless steel wire 12swg (length 20ft), stainless steel wire 15swg (length 20ft), ss pad lock 6" l, ss pad lock 4" l, ss pad lock 3" l, ss pad lock 2" l, ms pad lock 6" l, ms pad lock 8" l, m.s.welding rod 10 swg isi make, m.s.welding rod 12 swg isi make, s.s.welding rod 12 swg isi make, s.s.welding rod 10 swg isi make, s.s.welding rod 14 swg isi make, 14" cutting wheel, welding hand shield, welding glass with both sides safety glass. (safety glass+welding glass+safety glass), chipping hammer, wire brush, welding electrode holder, 1" x 1" m.s.square pipe 18 gauge (20 feet length) (isi), 7/8" m.s.round pipe 16 gauge (20 feet length) (isi), 3/4" m.s.channel (20 feet length) (isi), 1" x 1/8" m.s.angle (20 feet length) (isi), 3/4" x 3/4" m.s.square pipe 14 gauge (20 feet length) (isi), 1 1/4"x 1/8" m.s.angle (20 feet length)(isi), 8mm m.s.round rod (20 feet length)(isi), 8mm s.s.round rod (20 feet length)(isi), 1" x 1/8" m.s.flat (isi)(kg), 3/4" x 1/8" m.s.flat(isi) (kg), 1 1/2" x 1/8" m.s.flat (isi) (kg), m.s.rod 30mm dia 20 feet length, s.s rod 2.5 mm (20 feet length), s.s rod 6 mm (20 feet length), 2"x1/8 m.s flat (kg), bolt nut with washer 3/16"x1"l nickel coated (kg), bolt nut with washer 3/16"x11/2" l nickel coated (kg), bolt nut with washer 3/16"x2"l nickel coated (kg), 1/4" x1" m.s. bolt, nut with washer nickel (kg), 1/4" x11/4" m.s. bolt, nut with washer nickel coated (kg), 1/4" x11/2" m.s. bolt, nut with washer nickel coated (kg), 1/4" x2" m.s. bolt, nut with washer nickel (kg), 5/16" x 1" m.s.bolt, nut with washer nickel (kg), 5/16" x 11/2" m.s.bolt, nut with washer nickel (kg), 5/16" x 2" m.s.bolt, nut with washer nickel (kg), 3/8" x 1" m.s bolt, nut with washer nickel (kg), 5mm x 25mm g.i.coated bolt,nut with washer (kg), 25mm i.d washer with 3mm thickness (kg), nylon bush round type 3/4", nylon bush round type 1", nylon bush round type 1 1/4", nylon bush round type 1 1/2", nylon bush square type 3/4", nylon bush square type 1", nylon bush square type 1 1/4", nylon bush square type 1 1/2", 3/8th (30mm-1 1/4") plastic moulded star head male clamping knob, carpentry section, commercial ply wood 3mm water resistent isi marked(8x4) (sample to be provided), commercial ply wood 6mm water resistent isi marked (8x4) (sample to be provided), commercial ply wood 10mm water resistent isi marked (8x4) (sample to be provided), commercial ply wood 12mm water resistent isi marked (8x4) (sample to be provided), commercial ply wood 18mm water resistent isi marked (8x4) (sample to be provided), one side teak ply wood 18mm water resistent isi marked (8x4) (sample to be provided), one side teak ply wood 12mm water resistent isi marked (8x4) (sample to be provided), one side teak ply wood 6mm water resistent isi marked (8x4) (sample to be provided), one side teak p

Bronze Bush Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors