Web Analytics Made Easy - StatCounter

Brush Scrap Tenders

Get complete information related to latest Brush Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Brush Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Brush Scrap Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :45366634 Due date: 22 Jun, 202622 Jun, 2026 25.00 Lacs
Tender For corrigendum : repair to sunken flooring, plumbing with connected items to otm accn in aor of age b/r-ii of ge (east) ferozepur cantt - demolition of un-reinforced cement concrete in any position, complete all as specified and directed., m&l for cement concrete (1:5:10) type e-2 using 40 mm graded stone aggregate as in filling in sunkan slab or as in sub base, mass concrete, complete all as specified and directed., m&l for 15 mm thick rendering over concrete surface of sunken floor in cm 1:3 on wall as well as sunken floor finished even and smooth without using extra cement using wpc complete all as specified and directed.(wpc measured and paid separetely), m&l for water proofing treatment to rcc sunken floor including wall comprising with the following course of treatment/ specifications form bottom to top:-(a) applying evenly a tack coat of industrial bitumen 85/25 @ 1.6 kg per sqm over a coat of bitumen primer @ 0.40 ltr per sqm including preparation of roof surfaces complete all as specified and as directed.(b) app based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.note: (i) laying of app based membranes shall be done by torch on method or as per manufacturers instructions.(ii) a minimum overlap shall be not to be less than 150mm of polymeric membranes and sealed all overlaps and joints as manufacturers instructions.(iii) all ci/pvc traps in sunken slabs to be enclosed with pcc 1:1.5:3(min 15 cm) all round., supply only integral water proofing compound, complete all as specified and directed., taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair and even including wpc,preparation of new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of chalk white primer on walls complete all as specified and directed. (wpc measured and paid separately), m&l for preparing old surfaces plastered or unplastered of walls, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coats of cement based paint complete all as specified and directed., m&l for rendering 15 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished fair and smooth without using extra cement complete all as specified including preparation of new surfaces of wall and applying two coats of oil bound distemper on walls including corneces, pillars etc complete all as specified & directed., m&l for preparation of old decorated surface of wall and applying one coat of oil emulsion distemper, complete all as specified and directed., m&l for rendering 5 mm thick on ceiling surfaces in cement mortar (1:3) finished even & smooth without using extra cement including preparation of new plastered or unplastered surfaces and applying two coats of white wash on ceilings, complete all as specified and directed., m&l for preparing old surfaces plastered or unplastered of ceiling, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime wash (white washing), complete all as specified and directed., resecuring or eashing & adjusting, without taking down of shutters of any description of exc. 1 sqm but n.exc. 2 sqm each complete all as specified & directed., taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 square metre each including cut

CTN :45374522 Due date: 09 Jun, 202609 Jun, 2026 NA
Tender For auction sale of depot miscellaneous scrap - lot no.y.nf-37.exemp.o-1 (bin no-1 & bin no-2).05.26.03 description- scrap iron frame with nf attachments, carbon brush with copper wire, armature, all types of choke (industrial & domestic) petromax lamp etc. [our offer:- scrap & cond. lt panel, ht panel, vaccum circuit breaker, outdoor transformer, erru, resistor harmonic filter, air cooled power transformer, voltage regulator, battery charger, air dryer, cable head termination, transformer 50 kva, transformer 3 kva, regulator unit, earhing device, welding plant etc. at o-1 sector in bin no-1 & bin no-2 as available in the lot.] [if any other material found under the lot which is not pertaining to lot , will not be delivered] [loading will be done by purchaser's own arrangement]

CTN :45312053 Due date: 02 Jun, 202602 Jun, 2026 50.00 Lacs
Tender For supply of materials required from time to time for the repair of damaged distribution transformers in electrical division kishtwar during the year 2026-27., se almunium winding wire (round) in sizes 12 to 21 swg, dpc almunium winding wire (round) in sizes 12 to 21 swg, dpc almunium strip of sizes for lv winding of distribution transformers capacity 25kva to 250kva, se almunium winding wire (round) in sizes 12 to 21 swg (in exchange of one kg of scrap including insulation coverage i.e.salvaged conductor), dpc almunium winding wire (round) in sizes 12 to 21 swg (in exchange of one kg of scrap including insulation coverage i.e.salvaged conductor), dpc almunium strip of sizes for lv winding of distribution transformers capacity 25kva to 250kva (in exchange of one kg of scrap including insulation coverage i.e. salvaged conductor), se copper winding wire (round) in sizes 11 to 22 swg, dpc copper winding wire (round) in sizes 11 to 22 swg, dpc coppper strip of sizes for lv winding of distribution transformers capacity 25kva to 250kva, se copper winding wire (round) in sizes 11 to 21 swg (in exchange of one kg of scrap including insulation coverage i.e.salvaged conductor), dpc copper winding wire (round) in sizes 11 to 21 swg (in exchange of one kg of scrap including insulation coverage i.e.salvaged conductor), dpc copper strip of sizes for lv winding of distribution transformers capacity 25kva to 250kva (in exchange of one kg of scrap including insulation coverage i.e. salvaged conductor), contactors 63a, reverse forward switch 32a, reverse forward switch 40a, insulation gum, exhaust fan 32, buy back of scrap/old brass bush rods, cork washer for lt bushings big/small, cork washer for ht bushings big/small, transformer oil ( fresh), lt rubber washers (small m12 &m 20) ( large m12 & m20), ht rubber washers, ms washers for lt, gutka for ht bush, combination spanner set 25-1.25 (25 ppieces), gum shoes 7/8/9 no., protective ppe gear with goggles, industrial dangri uniform, cotton tape 1 (size) length 25mtr., nawar tap 1 (size), old cotton sari/ cloth, rubberized cork sheet 4mm thick, rubberized cork sheet 5mm thick, cork strip 5mm thick, lathoride paper, electrical grade kraft paper, packing sheet 1 mm, packing sheet 1.5mm, varnish dr. beck, m seal, fevicol / insulation gum, glass wool sleeves of sizes, bakellite tube 1/2 inch ,1/4 inch (1 mtr), packing gutties, manual operated oil pump, clamp tester digital, ms nuts and bolts full thread size 1/2 to 3 inches, ms plugs and caps 1/2,3/4,1,1.1/4, 1.1/2 confirming to relevent is code amended upto date, fire extinguishers, heating coils for electrical heaters in oven 2kw rating, film paper 7mils confirming to relevent is code amended upto date, tarpin oiil, painting brush of sizes

Central Government/Public Sector

CTN :45266027 Due date: 27 May, 202627 May, 2026 NA
Tender For auction sale of depot miscellaneous scrap - p.l. no. 98327768 condemned and unserviceable dynamic braking fan motors without fan -vertical type ( in which four numbers top end shield is aluminium and remaining ten numbers ferrous ) of sorts and sizes , full , intact with copper coils, commutators and shafts . with / without bearings, brush holders ,bearing caps, terminal boards, wires , cables and other ferrous / nf attachments. . as is where is basis. total weight- 4290 kgs approximately for 14 numbers. rate per number should be quoted.

Central Government And Public Sector

CTN :45028716 Due date: 27 May, 202627 May, 2026 NA
Tender For corrigendum : supply of cylindrical brush , scrapper wire brush

corporations/Associations/Others

CTN :45222653 Due date: 29 May, 202629 May, 2026 NA
Tender For auction sale of u/s 200/210 ltr rusted empty steel drums,u/s ms coal pipes and bend scrap with ceramic lining scrap,u/s cast iron scrap,u/s conveyor roller ms scrap without rubber lining,u/s mixed ms scrap,u/s grinding ring steel scrap,u/s grinding ball scrap,u/s grinding roll scrap,u/s bull ring segment scrap,u/s esp/ gi sheet / ms tin scrap,u/s boiler air heater tube steel (including bend and damage tube) scrap,u/s air heater tube cut piece scrap,u/s boiler water wall panel scrap,u/s economizer tube coil scrap,u/s crusher hammer scrap,u/s ms pipe scrap,u/s bearing scrap,u/s aluminium scrap/ aluminium cap of bulb and tube scrap,u/s chock scrap,u/s measuring instrument/ all type and fitting scrap/ elect item scrap -25 kg,u/s lighting fitting scrap,u/s cu-ni-90/10 condenser tube scrap,u/s ss condenser tube scrap,u/s carbon brush scrap,u/s uncomplete different size panel scrap (3 nos ),u/s 1600 amp. 6.6kv sf6 breaker interrupter unit scrap,u/s 2500 amp. 6.6kv sf6 breaker interrupter unit scrap,u/s gear box sdn-630 (write off),u/s dc motor 132kw and 125 kw scrap,u/s generator transformer 200mva,u/s lube oil with drum,u/s transformer oil with drum,u/s battery scrap (25kg),u/s plastic scrap (5 kg),u/s e-waste scrap,u/s beml make hydraulic loading machine pc 220fs shovel,u/s beml make bulldozer d-80-12a

Central Government/Public Sector

CTN :45031541 Due date: 14 May, 202614 May, 2026 NA
Tender For auction sale of depot non ferrous scrap - scrap carbon brush with copper pig tail and loose if any different type and size with insulation and other attachment if any note:1. loading after 15.00 hrs. will not be allowed

CTN :44952904 Due date: 28 Apr, 202628 Apr, 2026 NA
Tender For auction sale of depot miscellaneous scrap - lot no.y.nf-37.exemp.d. 04.26.02 description- scrap iron frame with nf attachments, carbon brush with copper wire, armature, all types of choke (industrial & domestic) petromax lamp etc. [our offer :- scrap & cond. distributor valve (ek dv & c3w dv) as available in the lot.] [loading will be done by purchaser's own arrangement]

CTN :44952905 Due date: 28 Apr, 202628 Apr, 2026 NA
Tender For auction sale of depot miscellaneous scrap - lot no.y.nf-37.exemp.i-3.04.26.01 description- scrap iron frame with nf attachments, carbon brush with copper wire, armature, all types of choke (industrial & domestic) petromax lamp etc. [our offer:- scrap & cond. axle box containing brass bearing as available in the lot.] [loading will be done by purchaser's own arrangement]

Central Government/Public Sector

CTN :44670909 Due date: 06 Apr, 202606 Apr, 2026 NA
Tender For auction sale of depot non ferrous scrap - 98210014: cond. & u/s. copper scrap consisting of copper plate , copper cut pieces, contact ring , contact lever,contact arm,gr slip ring,tfr bushing, contact,smgr interlock strip,screw,tube, copper strip, copper nut, copper bolts, loco brake part, copper pipes, carbon brush wire,copper rods, copper bus bars, gr roller, cgr coils, contact parts ,gfc tip,copper shunt contactor, copper slug,copper clip, copper brush, inter connecting copper with/without lug, copper washer, blow out coil,line contactor, copper braker, transformer coils and rods, transformer windings, coils such other similar items with or without ms/brass and other attachments and with or without coatings as is where is condition. location: in tub no-1,2,3 of ward 04/ssd/ptj.
 Loading, Please wait...

Connect us via What's Up