Latest bucket wheel Tenders | Government bucket wheel Tenders

State Government

CTN :45593471

27 Jun, 2026 NA

Jharsuguda - Odisha

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - power house; stacker & re-claimer bucket wheel gearbox repair work; service provider

State Government

CTN :45542764

19 Jun, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

State Government

CTN :45478624

19 Jun, 2026 NA

Jharsuguda - Odisha

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - power house; stacker & re-claimer bucket wheel gearbox repair work; service provider

corporations/Associations/Others

CTN :45480167

12 Jun, 2026 NA

Neyveli - Tamil Nadu

Tender For auction sale of condemned iron scrap as per description,condemned alloy steel scrap as per description,condemned rollers and shafts inclusive of rubber lined and cushion rollers scrap,iron scrap as per description,condemned rubber lined conveyor pulley drum scrap,vane beater plate scrap,dozer parts and scrap other items as per description,condemned bucket wheel teeth scrap,iron scrap consisting of auto parts scrap,condemned rusted iron as per description,condemned iron scrap items as per description

CTN :45449487

27 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of services for desiltation and removal of floatsam from main drain within the unit c c - daily desiltation and removal of floatsam from storm drain upto bottom and dumping at designated place , daily cleaning of open and closed drain with removal of slab covers excluding sunday from 0830 top 1730 hrs length of drain 2750 mtrs width of drain 01 mtrs depth of drain 01 mtrs , painting of side walls of storm drain with red emulsion paint berger nerolac asian make once in two months storm drain 1375 mtr length x 2 mtr height x 02 sides , painting of side walls of open drain with red emulsion paint berger nerolac asian make once in two months open drain 2750 mtr length x 1mtr height x 02 sides , painting of top edge of storm drain with white emulsion paint berger nerolac asian make once in two months storm drain 1375 mtr length x 1 mtr width x 02 sides , painting of top edge of open and closed drain with white emulsion paint berger nerolac asian make once in two months open drain 2750 mtr length x 1 mtr width x 02 sides , monthly mechanical cleaning by jcb excavator of kondagedda channel area exiting unit perimeter till

Central Government/Public Sector

CTN :45208234

13 Jun, 2026 5.12 Crore

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : environmental measures. hiring of mechanical equipment for attending miscellaneous works of operational areas in visakhapatnam port for a period of 3 years i.e. 2026 to 2029. - supply hydraulic excavator (3d) with tyre mounted with driver and fuel for clearing the unwanted materials minimum 8hrs per day from the drainages (destination/roads of vpa) as required and as directed by the engineer-in-charge,complete all hire and operational charges.all labour and materials., supply of tractor with trolley in good running condition of make tata/ashok leyland/mahindra or equivalent having a carrying capacity of 3.00 m3 with hydraulically operated body for attending miscellaneous works in port operational areas and other areas as required and as directed by the engineer-in-charge .the cost inclusive of all hire and operational charges etc.., complete.all labour and materials., hiring of suv(non a/c) tata sumo/bolero/ tavera of equivalent of higher version of model 2019 of later including drivers salaries and maintenance charges,hire and operational charges as required and as directed by the engineer-in-charge, complete with 1800km mileage per month., supply of mini excavator in good running condition of make tata/hitachi/z-axis 20 u or equivalent to work in port operational areas and other areas in port area for desiltation of all types of drains and other miscellaneous etc.., as required and as directed by the engineer-in-charge.the cost inclusive of all hire and operational charges etc..,complete., supplying of man power associate with the vans and equipments in port operational areas with necessary tools and plants etc.., as required and as directed by the engineer-in-charge,complete.all labour and materials.

CTN :45296127

06 Jun, 2026 2.97 Lacs

Jodhpur - Rajasthan

Tender For bid to ras supply of material and labuor for excavation by mechanical means hydraulic excavator , m and l for repairing of road with ready to use patch mate instant road repair material , supply in fixing in repair lrc leak repair clamp made out of ms alongwith nut bolt , supply and filling of lead wool for leakage repair , m and l for filling dry sand in excavated trench at the place of repairing

Central Government/Public Sector

CTN :45317950

10 Jun, 2026 NA

Angul - Odisha

Tender For providing of custom bid for services - deployment of hydraulic excavator for cleaning of slush and mock from railway track line by mechanical means for a period of two years at siding no 3 and 4 of bhubaneswari ocp under bbsri area re-tender or 2nd call

CTN :45311676

10 Jun, 2026 NA

Birbhum - West Bengal

Tender For procurement of spares for crushers , roller screen and stacker reclaimer of stage ii, chp - bktps/chp-mm-2/cr/178. ), plate kick off for ring granulator l & t make ring granulator 817u drg.no.04140-m-bm-cs-ga-0309 ( reference drawing no.bktps/chp-mm-2/cr/e05/46. moc:sail hard. ), plate liner for roller screen identification no.51/7 of drg.no.r.e 07.510.20.50 for thyssenkrupp make roller screen,1set=2no ( as per departmental dimensional outline drawing no. - bktps/chp-mm-2/rs/14. ), plate liner for roller screen identification no.51/4 of drg.no.r.e 07.510.20.50 for thyssenkrupp make roller screen ( as per departmental dimensional outline drawing no. - bktps/chp-mm-2/rs/16. ), plate liner for roller screen identification no.51/6 of drg.no.r.e 07.510.20.50 for thyssenkrupp make roller screen ( as per departmental dimensional outline drawing no. - bktps/chp-mm-2/rs/17. ), plate liner for roller screen identification no.51/2 of drg.no.r.e 07.510.20.50 for thyssenkrupp make roller screen,1set=2no ( as per departmental dimensional outline drawing no. - bktps/chp-mm-2/rs/28. ), tooth of bucket for bucket wheel $for stacker reclaimer l&t drg.no.04140-m-bm-eq-ga-3142 ( as per departmental dimensional outline drawing no. - bktps/chp-mm-2/sr/48. )

CTN :45290770

29 May, 2026 3.16 Lacs

Ernakulam - Kerala

Tender For mla-sdf- kothamangalam lac- 2025-26- setting up of open gym equipments at ward 15, kothamangalam municipality, ernakulam district - construction of open gym, 2.6.1:earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge.all kinds of soil, 4.1.8:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources), 5.1.2:providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources), 5.22.6:steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelthermo - mechanically treated bars of grade fe-500d or more, 5.9.1:centering and shuttering including strutting, etc. and removal of form for:foundations, footings, bases of columns, etc for mass concrete, 16.83:taking out existing cc interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of engineer-in-charge., od289920/2025-2026:walker single- providing and fixing walker single fnf 004- minimum 100 nb gi c-class pipe- for main frame, minimum 32 nb gi c-class pipe- for leg frame, minimum 25 nb gi c-class pipe for handle frame, nylon 66 injection moulded casing clamps, lldp root molded seat with inbuilt bolts 3/8" x 1.5" foot rest, nylon 66 injection molded bearing cap & pipe cap, fully done by first coat of primer – jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80micron thickness powder coat, od289924/2025-2026:rider- providing and fixing fun rider (fnf 002)- minimum 100 nb gi c-class pipe- for main frame, minimum 32 nb gi c-class pipe for seat frame, minimum 40 nb & 25 nb c class gi c-class pipe for handle frame, minimum 32nb & 25nb gi c-class pipe with two handles for leg rest, lldp rotomoulded seat with inbuilt bolts 3/8" x 1.5" for foot rest & seat rest, nylon 66 injection moulded bearing cap & pipe cap, fully done by first coat of primer – jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness powder coat., od289921/2025-2026:ski trainer- providing and fixing ski trainer- fnf 014- minimum 100 nb g.i. c class pipes for main frame, minimum 40 nb g.i. pipe for foot rest pipe, minimum 40nb & 25 nb g.i. pipe for handle, minimum 25 nb & 40 nb gi c-class pipe for connecting pipe, lldp rotomoulded seat with inbuilt bolts 3/8" x 1.5" for foot rest, nylon 66 injection moulded bearing cap & pipe cap, fully done by first coat of primer – jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80micron thickness powder coat, od289922/2025-2026:abb trainer- providing and fixing abb trainer - fpspcl187- minimum 80 nb gi c- class pipe for main frame, minimum 32 nb gi c-class pipe for side frame, minimum 25 nb g.i. pipe for intermediate pipe, nylon 66 injection moulded bearing cap & pipe cap, fully done by first coat of primer – jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness powder coat ., od289923/2025-2026:cycle- providing and fixing cycle - fpspcl208 - 25 nb & 40 nb gi c-class pipe for main frame, 32 nb gi c-class pipe for seat frame, 25 nb

Bucket Wheel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector