Latest bucket elevator Tenders | Government bucket elevator Tenders

Central Government/Public Sector

CTN :45733150

07 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - lot consisting of condemned foundry slag cake with rubble including slag dust, waste foundry sand and refractory bricks as available in the lot area except loose ferrous items. however ferrous items embedded with the slag cake, which cannot be removed ordinarily by hand shall be permitted for loading. delivery will be given from road approaching point in one direction only note : purchaser should lift all the material as available in the lot including rubble, ash content, mud etc., while delivery. material from the lot shall be lifted from one end removing both slag and rubble by scooping both simultaneously. no loose ferrous items such as wheel cuts, axle end cuts, runners, raisers, rail cuts, pipes, angles, channels, rods, sheets etc., will not be permitted for delivery. purchaser can inspect the materials thoroughly before e-auction. purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. delivery unit : in mt

corporations/Associations/Others

CTN :45728515

06 Jul, 2026 NA

Multi City - Multi State

Tender For auction sale of lift scrap

State Government

CTN :45540338

06 Jul, 2026 NA

Parseoni - Maharashtra

Tender For corrigendum : 5 chutes multigrain color sorter and air compressor 130 cfm, air dryer,1000 ltr air tank with 6 inch bucket elevator 25 ft

Central Government/Public Sector

CTN :45126039

02 Jul, 2026 NA

Ramgarh - Jharkhand

Tender For bid to ras providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; changing of head drum/shaft of bucket elevator; as mentioned in atc,repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; changing of head drum/shaft of bucket elevator; as mentioned in atc,repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; changing of head drum/shaft of bucket elevator; as mentioned in atc,repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; changing of head drum/shaft of bucket elevator; as mentioned in atc,repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; changing of head drum/shaft of bucket elevator; as mentioned in atc,repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; changing of head drum/shaft of bucket elevator; as mentioned in atc,repair, ma

Central Government And Public Sector

CTN :45732550

07 Jul, 2026 NA

Palakkad - Kerala

Tender For replacement of the steel cord belt for separator feed belt bucket elevator in cement mill

Central Government And Public Sector

CTN :45731258

09 Jul, 2026 NA

Bengaluru - Karnataka

Tender For supply of nylon rubber belting 225 mm width, 3 ply, 10 mm thick, 4 mm top rubber, 3.5 mm bottom rubber, shr grade to withstand temperature up to 150 degree centigrade, length 16 meters for cope and drag cleaner bucket elevator. [ warranty period: 12 months after the dateof delivery ] ]

Central Government/Public Sector

CTN :45704684

17 Jul, 2026 63.18 Lacs

Ganjam - Odisha

Tender For supply of pulley for conveying system b b - head drum for belt conveyors of pulley drum diameter 550 x 700 face width as per the technical specification drawings bb 1220 , head drum for belt conveyors of pulley drum diameter 330 x 600 face width as per the technical specification drawings bb 950 , head drum for belt conveyors of pulley drum diameter 330 x 600 face width as per the technical specification drawings bb 900 , tail take up snub drum for belt conveyors of pulley drum diameter 330 x 700 face width as per the technical specification drawings bb 1220 , tail drum for belt conveyors of pulley drum diameter 273 x 600 face width as per the technical specification drawings bb 900 , drum for belt conveyors of pulley drum diameter 300 x 700 face width as per the technical specification drawings bb 1220 , head snub drum for belt conveyors of pulley drum diameter 219 x 600 face width as per the technical specification drawings bb 900 , snub drum for belt conveyors of pulley drum diameter 219 x 600 face width as per the technical specification drawings bb 900 , head drum for bucket elevator as per technical specification , head drum for bucket elevator 775 800 mm dia x 530 mm wide x 12 mm thick shell and rubber lagging with diamond grooves , shore a, shaft en 8 dia 110 mm at bearing side , head drum for bucket elevator 605 630 mm dia x 380 mm wide x 12 mm thick shell and rubber lagging with diamond grooves , , shore a, shaft en 8 dia 100 mm at bearing side. , head drum for bucket elevator 605 630 mm dia x 430 mm wide x 12 mm thick shell and rubber lagging with diamond grooves , shore a, shaft en 8 dia 110 mm at bearing side. , head drum for bucket elevator 605 630 mm dia x 380 mm wide x 12 mm thick shell and rubber lagging with diamond grooves , shore a, shaft en 8 dia 80 mm at bearing side. , tail drum for bucket elevator 650 700 mm crown x 530 mm wide x 10 mm thick shell with dia 25 bar crown type.shaft en 8 dia 90 mm at bearing side. , tail drum for bucket elevator 650 700 mm crown x 530 mm wide x 10 mm thick shell with dia 25 bar crown type.shaft en 8 dia 75 mm at bearing side. , drum for bucket elevator 505 550 mm crown x 380 mm wide x 10 mm thick shell with dia 25 bar crown type.shaft en 8 dia 65 mm at bearing side. , drum for bucket elevator 505 550 mm crown x 430 mm wide x 10 mm thick shell with dia 25 bar crown type.shaft en 8 dia 90 mm at bearing side. , drum for bucket elevator 505 550 mm crown x 430 mm wide x 10 mm thick shell with dia 25 bar crown type.shaft en 8 dia 80 mm at bearing side. , drum for bucket elevator 505 560 mm crown x 380 mm wide x 10 mm thick shell with dia 25 bar crown type.shaft en 8 dia 75 mm at bearing side. , drum for bucket elevator 505 560 mm crown x 380 mm wide x 10 mm thick shell with dia 25 bar crown type.shaft en 8 dia 80 mm at bearing side.

CTN :45606519

03 Jul, 2026 NA

Coonoor - Tamil Nadu

Tender For corrigendum : supply of machinery spares and workshop tools to all tantea factories - machinery spare, uj cross (srmt make) rll 793 type 47mm x 134mm (big cup), uj cross (srmt make) rll 790 type (small cup), uj cross 39.69 mm x 115.65 mm, uj cross 34.94 mm x 125 mm, propeller shaft - for sennova ctc, teflon bellow for kilnburn drier ff model 5500 mm x 250 mm x endless, teflon bellow 250 mm width x 5240 mm endless, teflon bellow 250 mm width x 5250 mm endless, teflon bellow 4000 mm x 250 mm x endless, teflon bellow 4400 mm x 250 mm x endless, gun metal gable bush for 18" rotor vane (l-160mm, id-79mm, od-112mm), arm centre gun metal bush for 18" rotor vane (l-75mm, od-68mm, id-48mm), coupling set for 18" dia rotor vane shaft (78 mm bore 22 mm x 6 mm key size) (vikram make), coupling set for 18" dia rotor vane shaft (95 mm bore 26 mm x 6 mm for gear box shaft end key size (vikram make), gable bush (gun metal) od-95mm, id- 69.5mm, l-125mm, gable bush (gun metal) od-106 mm, id- 80 mm, l-160 mm, arm centre bush (gun metal od-75 mm, id-38mm,l-100 mm, arm centre bush (gun metal od-63 mm, id-50.8 mm, l- 76mm, rotor vane 18" coupling rubber bush, rotor vane 15" coupling rubber bush, rotor vane 18" coupling pin, rotor vane 15" coupling pin, hammer (for impact pulverizer), beater (for kaysons pulverizer), bucket elevator conveyor, elevator bucket (s.steel), round type rubber bush, square type rubber bush, gun metal split bearing for middleton (split bush), frp - strip (teflon) size 2"x1/4"x13", frp strips 2"x13"x 5mm thick, 12"x2"x6mm frp teflon blade for green leaf sifter, shredder blade l- (17.5mm) 445mm, bore - 45mm, width - 75mm, thickness - 6mm, m.s. sheet-8x4x18g, gun metal bush od-39 mm, id- 19mm, l-45mm, nylon bush od-39 mm, id- 19mm, l-45mm, gun metal bush od-30 mm, id- 12mm, l-45mm, workshop tools, 52 lh single angle milling cutter m+15 (addision make), 55 lh single angle milling cutter m+15 (addision make), 62 lh single angle milling cutter m+15 (addision make), 65 lh single angle milling cutter m+15) (addision make), 60 lh single angle milling cutter m+15 (addision make), 70 lh single angle milling cutter m+15 (addision make), 10 tpi v profile grooving chaser m+15-102 th (addision make), 8 tpi v profile grooving chaser m+15 -120th (addision make), 8"x1"x1/2" green colour grinding wheel rough & smooth, 8" dia grinding wheel rough & smooth, 4" dia disc grinding wheel, grinding stone 8"x1"x5/8" rough and smooth, cup shape grinding stone, 16" x4" grinding wheel 1" thick, 4" cut off wheel, 24" measuring scale - metal, mesuring tap 3 mtr

CTN :45713980

14 Jul, 2026 93.80 Lacs

Thoothukudi - Tamil Nadu

Tender For auction sale of plant and machinery - lot no : 1hypothecated assets:primary security: plant and machinery as detailed below: machinery:1.raw salt hopper -1 no.,2) drier supporting structure -1 no.3)raw salt belt conveyor-1 no.4)air heater with heat exchanger-1 no. 5)screw conveyor - 1 no. 6)brine water pump-1 no. 7)raw water pump - 1 no. 8)bucket elevator - 2 nos. 9)gyro screen-2 nos. 10)fludized bed dryer - 1 no. 11) elgi screw compressor - 1 no. 12)elgi vertical receiver -1 no. 13) elgi air dryer 1 no. 14) elgi filter set - 1 no. 15)automatic vffs packing machine 1 no.16) automatic vffs packing machine - 1 no. 17) automaticvffs packing machine - 1 no. 18)raw salt feed hopper - 1 no. 19)raller crusher - 1 no. 20) raw salt belt conveyor - 1 no. 21) pouch conveyor - 1 no. 22)product screw conveyor - 1 no. 23) structure for all equipment's 1 no. 24)supply of continuous centrifuge 1 no.25)dry mill - 1 no. 26)product screw conveyor - 1 no. 27) washing tank with mech agitator - 1 no. 28)wet mill - 1 no. 29) supply fan 1 no.30) exhaust fan-1 no.31)cyclone dust - 1 no.32) elutration tank - 1 no.33)product sylo - 1 no. 34) electrical switch box-1 no.

Central Government/Public Sector

CTN :45723571

07 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot miscellaneous scrap - lot consisting of condemned, broken and used ceramic pouring tubes with rubble, mud, ash content etc., of various types, sorts and sizes as available in the lot area. note: delivery will be given from road approaching point in one direction only note : purchaser should lift all the material as available in the lot including rubble, ash content, mud etc., while delivery. material from the lot shall be lifted from one end removing both broken pouring tubes and rubble by scooping both simultaneously. purchaser can inspect the materials thoroughly before e-auction. purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. delivery unit : in mt

Bucket Elevator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors