Latest buff gear Tenders | Government buff gear Tenders

CTN :45103816

19 May, 2026 NA

Delhi - Delhi

Tender For supply of gear drive play measurement table/rs10 material-mild steel dimension and design: as per sample available in kalindikunj depot (before production, vendor should get approval of their final design and drawing from mukundpur depot) ]

CTN :44924515

14 May, 2026 NA

Pune - Maharashtra

Tender For corrigendum : supply of lv1/r-90, 172-48-001 sb-2(nsn no. 2520720306375) rh final gear box with suction pump and final drive

Central Government/Public Sector

CTN :45110707

15 May, 2026 NA

Avadi - Tamil Nadu

Tender For auction sale of depot ferrous scrap - condemned and u/s items released from coaches and bogies (centre pivot pin, draw and buff gear, gear wheel, shock absorber, intermediate tube, brake beams, coupler yoke, brake riggings parts, pins, washer, bolt & nut, rear cover, front cover, helical spring(cut/defaced). dashpot, axle box housing and other emu components melting in nature) on "as is where is" condition. any non-ferrous(like bronze, brass, aluminum etc.) items found it should be handed over to the custodian.. location:back side of emu workshop, avadi.. pl number:98050126. ds8:022688-26-00660 dated 2026-04-22. custodian:sse/emu/avd. remarks:crane/jcb/forklift loading permitted

Central Government/Public Sector

CTN :45110709

15 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector, motorman driver seat base with bend, hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,erclips,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger, safety strip, iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel), impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: a row bin 1 & 2

Central Government/Public Sector

CTN :44959325

27 May, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of yoke (sub-assly) for draw and buff gear to schaku coupler drg no.- 40.586.06.04 (2). as per rdso specn. no.- 61-b-36/rev.68-1 (rev.-2 of february-2025). [ warranty period: 36 months after the date of delivery ]

Central Government/Public Sector

CTN :45049367

09 May, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of rear plate (sub assly) for draw & buff gear to schaku coupler drg.no.- 40.586.06.03 (4) or equivalent rdso approveddrawing and as per rdso specn. no.- 61-b- 36/rev.- 68-1, with amnd. slip no.- i of october-2016 [ warranty period: 30 months after the date of delivery ]

CTN :45021646

19 May, 2026 NA

Tiruvallur - Tamil Nadu

Tender For supply of device for mounting and removing of gear box as an assembly with final drive / 175.95. 004cb-1

Central Government/Public Sector

CTN :44980760

01 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of set of gauges for schaku coupler with calibration certificate (traceable to nabl certified lab)& traceability certificate as per list below- 1.profile gauge for upper & lower cup sleeve(2ed-181-1149(schaku 40.586.06.01 (4)& 2ed-18101153(schaku(40.624.06-4(3),drg no.-se-g-121 -02 nos. 2. gauge for pin (31.8c11), drg. no.-se-g-120 -02 nos. 3. gauge for allen bolt/screw (2ed-181-1166), drg.no.-se-g-128-02 nos. 4. gauge for fork head 2ed-181-1204(schakudrgno.40-1000.10-6(3), drg. no. - se-g-132-02 no?s 5. gauge for front plate sub assy.2ed-181-1156 (schaku drg.40...586.06.02 (4), drg.no.-se-g-122-02 nos. 6. profile gauge for adjustable cup sleeve/pair of cup sleeve 2ed-181-1074(schaku drg.40.317.13-1 (3), drg. no.se-g-129 -02 nos. 7. gauge for bush upper & lower 2ed-181-1091(schaku drg.40-524.07-3(4) &2ed -181 1089(schaku drg.40-524.-7-4(4), drg.no.-se-g-118 -02 nos. 8. limit gauge for yoke (sub.assy.)2ed-1811183(schaku gr.40.586.06.04 (2), drg. no.-se-g-124 -02nos. 9. snap gauge for bolt 2ed-181-1181(schaku drg.40.586.06.3 (4), drg.no.se- g-126-02nos. 10. snap gauge for bearing bolt 2ed-181-1093(schaku drg.40.586.07.03 (3), drg. no.se-g-119-02 n o s. 11. limit gauge for carrier (sub assy.)& leaf spring compl.sub assy.2ed-181-1200 (schaku drg.40-524.07.03(4) & 2ed-181-1106(schaku drg.40.524.07.08 (20), drg.no.se-g-117-02 no?s 12. limit gauge for rear plate sub assembly 2ed-181-1157(schaku drg.40.586 .06.03 (4) drg.no.se-g-123-02 nos. 13. gauge for articulation bearing 2ed-181-1151(schaku drg.40.sk.1960 (3) drg. no.s-g-127 -02 nos. 14. go gauge for draft gear/draw &buff gear (sub assy.)drg.no.se-g-136-02 no?s qty-02 sets (set of 14 gauges). note: 1) gauge will be made of hard alloy steel. 2) tip or face of gauging profile should be hardened & tempered. 3) supplier should provide manufacturers certificate. 4) material to be supplied in well packed carrying case. [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :44972976

30 Apr, 2026 NA

Multi City - Multi State

Tender For auction sale of sprocket track drive (unsv),gear box with suction pump and final drive rh (unsv),track assy t-72 (unsv),track assy t-90 (unsv)

CTN :44952907

28 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.ws/s-yd/10/04/26-27/bg/cond./8w/emu motor coach and trailer coach description- iron and steel scrap cutup parts of bg cond./8w/emu motor coaches and trailer coach with or without n.f attachment, without contents if any. 1) se 10633 emu-mc 2) se 10632 emu-mc 3) se 10635 emu-mc 4) se 10636/108636 emu-mc 5) se 10954/108954 emu- tc 6) se 10950/108950 emu-tc nb: [1] (a) 04 emu motor coaches are to be sold without : i) buffers. ii) screw coupling. iii) bearing bolt. iv) draw and buff gear. v) draw hook with collar. vi) semi permanent coupler end -a. vii)semi permanent coupler end -b. viii) draw and buffer gear. ix) centre pivit pin top bush. x) centre pivot pin bottom bush. xi) wearing piece. xii) compensating ring. xiii) wheel sets 16 nos. xiv) oil pump motor. xv) radiator motor. xvi) rectifier cooling motor. xvii) transformer. xviii) choke tank (sl, tl & dl). xix) traction motor complete with pinion. xx) suspension brass bearing. xxi) auxilary compressor. xxii) battery charger. (b) 08 nos.bogie frames(trolley) are to be sold with fittings without primary suspension against srl no.01 to 04 . nb:[2]: emu trailer coaches are to be sold without 08 nos wheel sets along with roller bearing against srl no 05 and 06 and 04 nos bogie frame with complete fittings against srl 05 and 06 and other excluded fitting list as per latest excluded fittings /coach 1271 dated 13.09.2018. nb: [3] special condition for rolling stock- a) all excluded materials including wheel sets and bogie's fittings are to be handed over by the purchaser at the nominated location for which they have to arrange labour /tools/ equipment for loading of the excluded items from cutting site and then transport to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28 trolley, coil spring, screw coupling, buffer sets etc. (ii) sse-19 wheel sets (iii) sse-30 ep unit (iv) sse-53 & 56 other emu items to be hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 parcent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 parcent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser has cleared all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:[4] 24 nos. wheel sets with complete fittings and with excluded fitting (released item) and 04 nos.bogie frame with complete fittings are to be handed over by the purchaser to concerned location as advised by concerned sse. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys. [custodian/stock holder - sse-emu-56 for motor coaches and sse-carraige-kgpw for tc coaches]

Buff Gear Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others