Latest buffer plunger plug Tenders | Government buffer plunger plug Tenders

corporations/Associations/Others

CTN :45323486

02 Jun, 2026 44.97 Lacs

Vadodara - Gujarat

Tender For fabrication and erection of main girder section and leg support section for constructing of height gauge barrier at major road crossing on special repair side of miyagam branch canal (ch. 40.79 km to 62.50 km), luwara branch canal (ch.0.00 km to 16.737 km), dora branch canal (ch. 0.00 km to 15.615 km) & amleshwar branch canal (ch. 29.400 to 50.00 km) under the jurisdiction of the executive engineer, narmada project canal division no.05, miyagam-karjan.

CTN :45306392

08 Jun, 2026 82.38 Lacs

Faridabad - Haryana

Tender For providing and fixing of rcc jersey barrier from vaidh road puliya to sohna road along gaunchi drain both side in ward no. 06, nit faridabad. (recall)

CTN :45042795

30 May, 2026 NA

Ranchi - Jharkhand

Tender For corrigendum : the supply of road safety equipment with installation used for smooth traffic management on rate contract basis - flexibale road safe coneheight 710 mmbase size 340 x 340 mmweight of cone 4.5 kgsleeve 4 / 6 inchcolor orange , traffic attenuator, speed retardarcement filling required-no , size- l 350 w 250 h 50 mm weight-19kg , test certificate-100tons with 16 nail for installation., reflective safety jackets, traffic control illuminative light battonsize-54cm , dia 4 cm , leds-6r+6g+1w(torch) , rechargeable battery , light area 340mm., warning bollard with solar flasherheight-1230mm , base size-420mm,pole dia-100mm , tape size-4.5 inch x2 tape , weight-6.520 kg., pedestrian bollard channelizers., rwarning baricade bollard with complete trolley., flexibale hazzard marker post., pu rambler strips l-500xw125xh25 mm., reasy expandable barrierheight-1000mm/1mtr, open length-4 mtr , weight-15.5 kg , material-plastic pp., wheel lock clamp., ms collapsible barrier (ms scissor barrier)., tubulor reboundable post with hazarad marker., convex mirror 80 cm ., traffic linear / seprator., traffic drum., road delineator post., road sign board., safety sign board., traffic barrier/road barrier., safety chain., reflector., warnig reflective radum tape (2 inch), solar studssolar pannel -2.2w , ni-mh battery 1.2v/1300mah,visible distance-500mtr,led-6pcs super bright dia 5mm led per side, ip65

CTN :45151836

02 Jun, 2026 NA

Bathinda - Punjab

Tender For tender for rate contract of mash materials at aiims bathinda - required items, light weight partial absorbable mesh {polyglecaprone + polypropylene}, light weight partial absorbable mesh {polyglecaprone + polypropylene}, polypropylene mesh, polypropylene mesh, polypropylene mesh, polypropylene mesh, polypropylene mesh, tissue separating mesh {polyproplyne+ oxidized regenerated cellulose}, tissue separating mesh {polyproplyne+ oxidized regenerated cellulose}, tissue separating mesh {polyproplyne+ oxidized regenerated cellulose}, tissue separating mesh {polyproplyne+ oxidized regenerated cellulose}, soft polyproplyne and oxidized regenerated cellulose, mesh fixation device, mesh fixation device, macropourous partially absorbable mesh with 2:1strech made of soft polypropylene and polyglecaprone in ratio of 55:45 with unique honeycomb design, macropourous partially absorbable mesh with 2:1strech made of soft polypropylene and polyglecaprone in ratio of 55:45 with unique honeycomb design or macroporous partially absorbable mesh of polypropylen and polylactic acid., macropourous partially absorbable mesh with 2:1strech made of soft polypropylene and polyglecaprone in ratio of 55:45 with unique honeycomb design, macropourous partially absorbable mesh with 2:1strech made of soft polypropylene and polyglecaprone in ratio of 55:45 with unique honeycomb design or macroporous partially absorbable mesh of polypropylen and polylactic acid., macropourous partially absorbable mesh with 2:1 stretch made of soft polypropylene and polyglecaprone in ratio of 55:45 with unique honeycomb design, macropourous partially absorbable mesh with 2:1 stretch made of soft polypropylene and polyglecaprone in ratio of 55:45 with unique honeycomb design, prolene mesh, a permanent barrier separator mesh with 3d polymer matrix on parietal side fused to silicon film on the visceral side to prevent adhesions. mesh should have perforations to prevent seroma formation. should have prefix pp sutures, a permanent barrier separator mesh with 3d polymer matrix on parietal side fused to silicon film on the visceral side to prevent adhesions. mesh should have perforations to prevent seroma formation. should have prefix pp sutures, a permanent barrier separator mesh with 3d polymer matrix on parietal side fused to silicon film on the visceral side to prevent adhesions. mesh should have perforations to prevent seroma formation. should have prefix pp sutures, a permanent barrier separator mesh with 3d polymer matrix on parietal side fused to silicon film on the visceral side to prevent adhesions. mesh should have perforations to prevent seroma formation. should have prefix pp sutures, a permanent barrier separator mesh with 3d polymer matrix on parietal side fused to silicon film on the visceral side to prevent adhesions. mesh should have perforations to prevent seroma formation. should have prefix pp sutures, a permanent barrier separator mesh with 3d polymer matrix on parietal side fused to silicon film on the visceral side to prevent adhesions. mesh should have perforations to prevent seroma formation. should have prefix pp sutures, a permanent barrier separator mesh with 3d polymer matrix on parietal side fused to silicon film on the visceral side to prevent adhesions. mesh should have perforations to prevent seroma formation. should have prefix pp sutures, a permanent barrier separator mesh with 3d polymer matrix on parietal side fused to silicon film on the visceral side to prevent adhesions. mesh should have perforations to prevent seroma formation. should have prefix pp sutures, a permanent barrier separator mesh with 3d polymer matrix on parietal side fused to silicon film on the visceral side to prevent adhesions. mesh should have perforations to prevent seroma formation. should have prefix pp sutures, a permanent barrier separator mesh with polyester knitted mesh on parietal side and polyethylene film on the visceral side to prevent adhesions. mesh should have per

corporations/Associations/Others

CTN :45178116

03 Jun, 2026 19.83 Lacs

Puruliya - West Bengal

Tender For providing wind barrier at ash pond 2 towards pabra village side at dvc, rtps.

Central Government/Public Sector

CTN :44933992

30 May, 2026 NA

Koraput - Odisha

Tender For corrigendum : procurement of jigs and fixtures as per drawing from hal registered vendors - end cover as per bhel drg no 26992190049 rev 05 varno00 , end cover as per bhel drg no 26992190049 rev no 05 varno 001 , molded panel rear side as per bhel drg no 36992190024 rev no 03 item no 001 var no 00 , topslashbottem front panel as per bhel drgno 36992190021 rev no 03 item no 001 var no 00 , topslashbottem front panel as per bhel drgno 36992190021 revno 03 item no 002 var no 00 , end covertopslashbottem dc bus bar side as per bhel drgno 36992190020 rev no 03 item no 001 var no 00 , end cover topslashbottem cooling as per bheldrgno 36992190020 revno 03 item no 002 var no 00 , end cover topslashbottem drgno as per bhel 36992190020 rev no 03 item no 003 var no 00 , middle front panel with cutout as per bheldrgno 26992190147 rev no 02 var no 00 , middle front panel with out cutout as per bhel drg no 26992190147 rev no 02 var no 01 , gland plant heat exchanger as per bhel drgno 46500300036 rev no 02 var no 00 , blanking plate as per bhel drgno 46500300034 rev no 01 var no 00 , duct support rectifier as per bhel drgno 46992190014 rev no 02 var no 00 , trunking details rh and lh drgno 46500900046 rev no 01 var no 00 , trunking details top and bottem as per bhel drg no 46500900047 revno 02 var no 00 , gland plate as per bhel drgno 46500700001 revno 02 var no 00 , fibre glass header tank as per 36500600024 rev03 , insulation sleeveto as per bhel drgno 46992190011 rev02 , insulating stud to as per bhel drg no46500300027 rev 03 , stack support to drgno 46500300037 rev03 item 1 , stack support drg no 46500300037 rev03 item2 , stack support to drg no46500300037 rev03 item03 , toughened glass to drg 46500300032 rev02 , phase barrier to drg 36500300104 it01 rev no 01 , nylon braided pvc hose sl25 id25mm od35mm , nylon braided pvc hose sl010 id10mm od16mm , ss304 klipco tightening clip 28mm od

CTN :45261966

29 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ms/gi signal items include electronic lifting barrier (elb) booms, etc., in various sizes, released from the signal department. these items are no longer suitable for railway use. remarks: hammering are allowed location: east side of ward no. 77. lbpl, dbaw, gst-18%, tcs -1% , hsn code-72045000, allocation-20714208

CTN :45072376

09 Jun, 2026 2.10 Crore

Delhi - Delhi

Tender For corrigendum : supply of face recognition device , single side swing barrier , double side swing barrier , switch rack , server with monitor , 6 kva online ups with 16 batteries with rack , 3 kva online ups with 16 batteries with rack , access control software , 24 port network switch , desktop pc for enrolment , user enrolment software with anti virus , armored power cable , armored lan cable , armored ofc cable , stainless steel or aluminium mount , steel structure with toughened glass , misc accessories , mi - fare visitor card , printer , installation and commissioning , camc 1st year , camc 2nd year

Central Government/Public Sector

CTN :45218634

22 May, 2026 NA

Multi City - Delhi

Tender For auction sale of depot ferrous scrap - cond. and scrap m.s and c.i signaling released material comp. of padstal, wench machine, counter weight, wheel, interlocking lever, crank, fish plate, cable marker, nut bolt, bottom/top roller, wire adj. screw, joint, discounting link, point side, gate boom barrier, foundation,terminal,locking topper, extended bracket, main signal unit, cls unit 1 to 4 aspect arm signal, signal post, signal base, girder, lifting barriar lever,lpipe,channel, pole, pole stand angle, ground liver frame, straight arms, all type of lock, crank, and wheel, hand plunger lock, panel indication lock,epd, slideing boom gate, mlb, bell, boom solid joint, winch set, weight, pully vertical and horizontal and other miscellaneous signal items with or without n/f attachment. as is where is basis. as it is. note:- loading by purchaser.

CTN :45134931

05 Jun, 2026 NA

Uttarakannada - Karnataka

Tender For conclusion of price agreement of 68 ortho consumables for a period of one year at inhs patanjali. - drugs and consumables, 4mm (ti) partial thread screw (cc screw), locking compression plate 07 hole (ti) complete construct, 06 hole locking compression plate (ti) complete construct, headless compression screw 2.4mm (ti), 07 hole 3.5mm (lcp) complete construct (07x cortical screw), 05 hole (3.5mm) complete construct (04x cortical-01x locking screw), headless cancellous screw 3.0mm, proximal tibial medial locking plate 4.5 mm,03/04/05 hole, ti, 4.5 mm broad lcp 08/09/10 hole, ti with screws, 3.5 mm recon plate (ss), 06/07/08 hole with screws, 3.5mm 1/3rd tubular plate (ss),06/07/08 hole with screws, proximal humerus locking plate with screws. titanium, 04-06 hole (philos), small resistance band (theraband), medium resistance band (theraband), large resistance band (theraband), ankle binder, heel cushion; size-s.m. l, walking stick tripod, walking stick tetrapod, walker child size (iso/ce/who gmp), skin traction kit, gel heel pad, knee support with hinges & gel pad, elbow support with gel pad, ankle support with gel pad, turnbuckle brace elbow, post-operative elbow orthotic with extension stops, llcp for distal femur,11 holes right tt surgical grade titanium bis/us fda/eu-ce (full quality assurance) (full quality assurance, polyurethane ester dressing 11cm x 8cm x 1.8cm for npwt instillation therapy with holder cassette for topical solution and 1000ml canister for exudate collection it should be dggi and fda & ce certified, the unique three-layer design dressing 18x12.5cm x varying thicknesses(0.83.2cm) dressing for autolytic debridement of wounds for npwt instillation therapy system also contains wound ruler advanced drape; cavilon no sting barrier film.en, pulse lavage with intramedullary canal brush, walker hd adjustable, disposable thr drape set consisting of 01 bilateral drape set 04 reinforcement gown 04 screen cover 02 trolley cover 02 leg cover with 08 ot towel & cling film, lcp plate proximal tibia with 5 locking and 4 cortical screws rt/lt assorted size tt, distal radius volar plate (variable angle locking plate) titanium left side, lcp titanium 6 hole 3.5mm, partially threaded cannulated cancellous screw 4.0mm (ti) with washer, 1/3 tubular plate (ti) 06 hole, tibial nailing system (expert type titanium consisting of expert tibial nail 1 nos, locking bolt 5 nos, end cap 1 nos, size 8-11 mm dia, anterolateral distal tibial periarticular plate system (left or right) complete construct with 06 locking and 03 cortical screws (titanium), distal radius locking plate variable angle complete construct with 6 locking and 3 cortical screws (titanium) sterile packed, distal tibial medial low-profile periarticular planning system (left or right) low profile, complete construct with 08 locking screws and 03 cortical screws (titanium), unilateral knee drape set made of impermeable control plue fabric with cripple layer two large water proof trolley cover of size -152 cm x 228 cm appx, one water proof trolley cover of size 112 x 229 appx impervious brand; generic 26471, 4.5mm cortex screw, 3.5 mm locking screw, 3.5 mm cortex screw, 4.5 mm limited contact dynamic compression plate narrow (lc dcp) titanium, (assorted sizes as per requirement), 4.5 mm cortical screws titanium (assorted sizes as per requirement), distal humerus lateral extraarticular locking plate, ti, 07 hole, with screws, distal humerus lateral locking plate, ti, 06 hole, with screws (rt), distal humerus lateral locking plate, titanium,06 hole, with screws (lt), distal humerus medial l locking plate, ti, 06 hole, with screws (lt), limited contact locking compression plate, narrow,3.5mm 06-09 hole, with screws, ti, 3.5mm locking screw, 3.5mm cortical screw, calcaneum anatomical plate system (right or left) low profile, complete construct with 6 locking screws (titanium), reinforcement gown 04 screen cover 02 trolley cover 02 leg cover with 08 ot towel and clin

Buffer Plunger Plug Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector