Latest buffer plunger Tenders | Government buffer plunger Tenders

Central Government/Public Sector

CTN :45313275

04 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - released mixed ferrous scrap: cutting pieces of engine block, bull gear, scrapped bogie parts ( bss pin, yoke pin, anchor link, silentent block, bss pin, yoke pin, anchor link, silentent block, bss hanger, circlip, anchor link bracket, lower spring seat, bearing, break beam etc., ) megi side bearer, spring, coupler spring, condemned alternator, gear, break disc, after cooler, housing pump, casing, armeture, push rod, cylinder head, nut bolt, pipes, cbc and screw coupler, coupler head assembly, carrer plates front and rear, supporting device, buffer plunger, protective tube, bogie bracket, break beam, hook and clamp, knuckle, m.s.plate and other miscellaneous mix ferrous scrap. excluding steel and aluminium. note 1. re-punching with other lots will not be allowed. 2. lading will be start at 09.00 a.m. loading will not be allowed after 15.00 hrs.

Central Government/Public Sector

CTN :45289245

02 Jun, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1. nr-094966 accnh/rcf 2. wc-081342 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 32 mt approx.) s.b. lot no. bpl/crws/26-27/cond. coach/10/0037. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :45289246

02 Jun, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1-nr-081086/ accnh /rcf 2-wc -081488 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 32 mt approx.) s.b. lot no. bpl/ crws/26-27/cond. coach/10/0038. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :45174701

26 May, 2026 NA

Multi City - Kerala

Tender For auction sale of rolling stock - pl no. 98111061, condemned and over aged bg-8 wheeler icf coach no. special repair wgscn 054562 (year built 2005) without bogie in grounded condition with all available ferrous non-ferrous wooden fittings thereon but excluding the following rc and already removed rc items. mechanical rc items 1] buffer plunger and casing 4 nos 2] cbc/screw coupling set [draw bar with hook, draft gear assembly] 2 set, 3] distributer valve complete full set 1 set, 4] main doors -4 nos 5] overhead water tank-4 nos 6] adapter for cut off angle cock- 4 nos. 7 ) cut off angle cock -4 nos. electrical rc items 1] alternator to regulator wire (copper)-1 kg. already removed rc items a) mechanical items 1] complete bogie arrangements including wheel sets 2 nos, 2] wearing piece( bronze) and plate 4 nos each.3] bogie mounted brake cylinder 4 nos. b) electrical items 1] bldc fan 400 mm-27 nos. 2]9w led lamp-26 nos. 3]2w night lamp -10 nos, 4] 9 w mirror lamp-2 nos, 5]mobile charger socket-18 nos. 6] regulator 4.5 kw- 1 no 7]vrla battery -13 nos. 8] battery tray- 4 nos. 9] rotary switch with panel board- 1 no. ds-8 no. 334551 dt 18.04.2026, custodian sse/c&w/pgt, location near pgt/memu shed.

corporations/Associations/Others

CTN :45046708

13 Jun, 2026 5.54 Crore

Multi City - Karnataka

Tender For corrigendum : supply of air suspension parts to the divisions of the nwkrtc. - nw-26-washer 22 mm - shock absorber , nw-26-washer 18 mm - shock absorber , nw-26-volvov air bellows, nw-26-volvo shock absorber-4, nw-26-volvo shock absorber-3, nw-26-volvo shock absorber-2, nw-26-volvo shock absorber-1, nw-26-volvo rubber bushing (shock absorber rubber bush), nw-26-volvo mounting plate air spring upper, nw-26-volvo gas spring side hatch 700n, nw-26-volvo bump stop, nw-26-volvo bellows-3, nw-26-volvo bellows-2, nw-26-volvo bellows-1, nw-26-volvo air spring (front bellow assy), nw-26-volvo air spring, nw-26-volvo air bellows-2, nw-26-volvo air bellows-1, nw-26-ud special nut bolt - engine, nw-26-ud rubber bushing, nw-26-ud bush - rear reaction top rod (75mm bush), nw-26-ud rear reaction rod top (rear v stay), nw-26-ud bush (v bar 85mm bush) - rear reaction rod , nw-26-ud rear reaction rod, nw-26-ud rubber spring - rear anti-roll bar , nw-26-ud reaction rod (front v stay), nw-26-ud reaction rod, nw-26-ud link rod - front (u bar), nw-26-ud front shock absorber assy, nw-26-ud bush (66mm) - front reaction rod , nw-26-ud front reaction rod, nw-26-ud front link rod, nw-26-ud bushing - front anti roll bar, nw-26-ud front and rear shock absorber, nw-26-ud ecas distance sensor, nw-26-ud connecting pin, nw-26-ud clamp (hanging bush), nw-26-ud bumper block, nw-26-ud altitude valve control rod assembly-3, nw-26-ud altitude valve control rod assembly-2, nw-26-ud altitude valve control rod assembly-1, nw-26-ud air spring (bellow) rear, nw-26-ud air spring (bellow) front, nw-26-tata/ley taper pivot bolt , nw-26-tata/ley connecting rod , nw-26-tata spherilastic bush taper lpo 1616, nw-26-tata bs6 shock absorber front, nw-26-tata bs6 bush/cut bush set - rear anti roll bar, nw-26-tata bs6 bush - rear anti roll bar , nw-26-tata bs6 bush - front anti roll bar, nw-26-taper sleeve, nw-26-steel piston 12 inch - single hole, nw-26-steel piston 12 inch - double hole, nw-26-spring washer - m16 , nw-26-split pin 3/16 x 2 1/2, nw-26-ley slf shock absorber-2, nw-26-rubber washer - bump stop, nw-26-rubber connector assly, nw-26-rubber bush - shock absorber , nw-26-rear axle sub compound link tc, nw-26-nylon tube - 8mm , nw-26-nylon tube - 6mm , nw-26-nylock nut - m16x2 , nw-26-nylock nut, nw-26-male elbow m12x1.5mm, nw-26-male connector, nw-26-machined washers - m24 , nw-26-machined washers , nw-26-machined washer ms - m16 , nw-26-m.bolero rear shock absorber, nw-26-m.bolero front shock absorber, nw-26-ley bs4 support bracket lh , nw-26-ley bs4 spherilastic bush, nw-26-ley slf u bolt m24x1.5x378mm, nw-26-ley slf suspension bolt (special bolt half threaded), nw-26-ley slf suspension bolt, nw-26-ley slf spigot , nw-26-ley slf spherilatic bush with pin , nw-26-ley slf shock absorber-1, nw-26-ley slf nyloc nut - m24x1.5 , nw-26-ley slf nut - suspention bolt, nw-26-ley slf anti roll cut bush rear , nw-26-ley slf alien bolt - m16x2x130mm, nw-26-ley bs4 shock absorber front 6.5t, nw-26-ley bs4 shock absorber, nw-26-ley midi bs4 stablizer holder asm, nw-26-ley midi bs4 bush - rubber-2, nw-26-ley midi bs4 bush - rubber-1, nw-26-ley midi bs4 rear shock absorber assy, nw-26-ley midi bs4 pull rod assy with bush , nw-26-ley midi bs4 front shock absorber assy, nw-26-ley midi bs4 bracket - suspension holder, nw-26-ley bs4 front shock absorber, nw-26-ley bs4 dowtee washer m26, nw-26-ley bs4 coller bush, nw-26-ley bs6 solenoid ptfc24v, nw-26-ley bs6 rear shockabsorber plate, nw-26-ley bs6 pallakki bellow air spring, nw-26-ley bs6 front shock absorber bottom-2, nw-26-ley bs6 front shock absorber bottom-1, nw-26-ley bs4 rubber pad assly, nw-26-ley bs4 retaining plate, nw-26-ley bs4 rear rubber air bellow 12 inch, nw-26-ley bs4 m16 spring washer , nw-26-ley bs4 levelling valve repair kit, nw-26-ley bs4 levelling valve assy , nw-26-ley bs4 air leveling valve lever, nw-26-ley bs4 air spring assly , nw-26-tata bs3 hex nut - m16x2, nw-26-tata bs3 hex bolt with nut -m16x2x100, nw-26-tat

Central Government/Public Sector

CTN :45220321

25 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of rolling stock - condemned bg 8 wheeler - coach (demu/dpc) with all available ferrous non ferrous-wooden fittings there on but excluding the following reclaimable items-mechanical rc items- 1) buffer plungers with buffer pads and buffer causings, 2) aluminium water tanks, 3) distributer valve complete set. electerical items 1) all types of batteries-if . coach no. - 1) special repair demu/dpc 14008= 1 coach, pl.no.98111061 ds8 no. 232871 dt: 17/06/2024, location: tondiarpet marshalling yard, custodian: sse-c and w-tnpm,note: 1) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.d and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government,2) all rc items should be handed over to custodian at respective locations, 3) rate per number should be quoted 4) coache is in grounded condition (bogies and wheel sets removed ). (5) cutting permitted to loadable size only. (6) crane loading permitted. (7) purchaser should take safety precaution while cutting of coaches. 8) 16.874 mts (app.wt) of components were removed.

Central Government/Public Sector

CTN :45220323

25 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of rolling stock - condemned bg 8 wheeler- ac coach with all available ferrous-non ferrous-wooden fittings thereon excluding rc items . mechanical rc items: 1) buffer plungers with buffer pads and buffer casings, 2) screw coupling with draw bar hook complete set. electrical rc items: 1) rmpu unit complete set.coach numbers- 1) special repair wgaccn 046134 = 1 coach, pl.no. 98111061 ds8 no: 023280-25-18926 dt 11.02.2026 (232869 dt 10.02.2026) , location: tnpm marshalling yard, custodian: sse/c&w/tnpm, note: 1)at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.d and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government,,2) bio toilet to be defaced before delivery. 3)rate per number should be quoted,4)coaches are in grounded condition (bogies and wheel sets removed ).5) all rc items should be handed over to custodian at respective locations. (6) cutting permitted to loadable size only. (7) crane loading permitted. () purchaser should take safety precaution while cutting of coache.

Central Government/Public Sector

CTN :45220324

25 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of rolling stock - condemned bg 8 wheeler- demu coaches with all available ferrous-non ferrous-wooden fittings there on but excluding the following reclaimable items-mechanical rc items- 1) buffer plunger with buffer casing complete set. coach no.- 1) special repair tc 11441 , 2) special repair tc 14428, ,3) special repair demu/dpc 14003 , = 3 coaches, ds8 no: 023280-25-10912 dt 12-10-2025 ( 232803 dt.10-10-2025 ). pl.no.98111061, location: tondiarpet marshalling yard, custodian: sse/c&w/tnpm, note: 1) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.d and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government, 2) all rc items should be handed over to custodian at respective locations. 3)rate per number should be quoted,4)coaches are in grounded condition, 5) components weighing approx 17.051 mt are removed from demu/dpc 14003. (6) cutting permitted to loadable size only. (7) crane loading permitted. (8) purchaser should take safety precaution while cutting of coaches.

Central Government/Public Sector

CTN :45246568

26 May, 2026 NA

Mumbai - Maharashtra

Tender For auction sale of rolling stock - cond. icf coaches with iron, steel, wooden scrap and other non-ferrous. 1. cr 90937 art 2. cr 011893 vph 3. special repair 016843 vph 4. cr 014035 vph 5. cr 011885 vph r/items: 1. wheel set with axel, axel box cover of all coaches=20sets& complete 10trolley with fittings. 2.dv of all coaches=05 nos and bmbc of all coaches=20 nos. 3. draw bar hook with screw coupling complete assembly=10 nos. 4. buffer plunger=20 nos, and buffer casing=20 nos of all coaches. remark: - 1. coaches are lying at kurla cutting yard line ktc-4 and ktc-6. 2. cutting allowed for easy loading. 3. purchasers are to see the coaches personally before bidding. no claim will be entertained after sale of lot. 4. r/items are to be handed over to sse/roh/c&w/ltt by the purchaser as per para 2.9 & 2.10 of jpo no. and letter no. m.688.s.43.c dt 18.08.2025. these shall be handed over at nominated place in roh depot. 5. railway track to be cleared by the purchaser before compilation of delivery i.e. mud, muck, rexine, pvc sheet, wood, ply, plastic, foam, glass, rubber etc. 6. purchaser has to ensure the safety of railway assets, his labour and other staff at site. 7. purchaser will be fully responsible for any damage to railway property. 8. precaution should be taken while dismantling/cutting and loading of cut parts. 9. purchaser has to keep fire safety equipment/items i.e water, sand, fire extinguiser etc. at the cutting yard. 10. lot will be sold on number basis. location: cla cutting yard line no ktc-4 and ktc-6. stock holder:-sse/roh/c&w ltt.

State Government

CTN :45028926

25 May, 2026 NA

Medininagar - Jharkhand

Tender For supply of line materials under electric supply area medininagar - electrical items :, suspension clamp assembly suitable upto 70-95 sqmm 12 messenger (including 1 nos suspension clamp with bracket, 2 mtr stainless steel strap & 2 nos ss buckles) and eye hook., dead end clamp suitable above 70 sqmm 12 messenger (including 1 nos dead end clamp bracket+ 1 nos dead end+ 2 mtr ss strap+ 2 nos s.s buckle minimum breaking load 15 kn), peircing connector for lt ab cable, smdb box, lt shackle insulator with straps

Buffer Plunger Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors