Get complete information related to latest Buffer Product Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Buffer Product Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Buffer Product Tenders.
Tender For supply of set of spares for modified sand pipe assembly for 3 phase locomotives. set consists of 03 items. (1) sander nozzle as per drg.no.c/els/lgd/bogie/4/158. set consists of 02 items. i)nozzle (thread pitch 1.5 mm) ref.1-01 no./set. ii) nozzle (thread pitch 2.5 mm) ref.2-01 no./set. (2) set of spares for modified sand pipe assembly, as per drg.no.c/els/lgd/ ex.ftg/3/20, alt-1, set consists of 07 items.i)support angular, ref.1-01no./set. ii)support steel flat, ref.2-01no./set. iii)delivery adopter, ref.3-01no./set. iv)hex.head bolt, ref.4-02no./set. v)hex. nut, ref.5-02no./set. vi)spring washer, ref.6-04no./set. vii)flat washer, ref.7-04no./set. (3) sand ejector dummy for 3 phase locos as per drg. no.c/els/lgd/bogie/4/159 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For auction sale of depot ferrous scrap - p.l no. 98050047. scrap c & w fittings consisting of bolster hanger ,anchor link, c buffer flange, control arm assembly, equalizing stay, brake head, striker block, face plate, locking plate, spare parts of brake cylinder, crank shaft of main compressor, knuckle, cbc, cbc coupler, axle box , laminated pole shoe, housing, bcn door, tension rod assembly, rear cover, suspension tube, brake beam, dash pot, buffer ,oil thrower, top casting, brake cylinder(ferrous) ,bottom casting, lower spring beam, oxy. cut ferrous ball bearing, miscellaneousellaneous spares parts of valve & cock, draft pad, screw coupling, yoke , hand bar, pull road, cam shaft, axle cap, ferrous bearing of sorts and sizes, ferrous part of different type of valve, collar ,ring, racer, socket head, jumper head, felt ring, ms cylinder, buffer casing, draw bar hook, hanger block, chain bolt, chute plate, wear plate, flap plate, draft gear, brake cylinder, pinion, impeller, schaku coupler parts, traction motor parts, nut bolts, pin, icf bogie component and miscellaneousellaneous ferrous items etc. as available in the lot, except any non ferrous. qty-150mt. location-east of vm road in ncb- 08.
Tender For auction sale of depot ferrous scrap - p.l.no.98050047.scrap c & w fittings consisting of bolster hanger ,anchor link, c buffer flange, control arm assembly, equalizing stay, brake head, striker block, face plate, locking plate, spare parts of brake cylinder, crank shaft of main compressor, knuckle, cbc, cbc coupler, axle box , laminated pole shoe, housing, bcn door, tension rod assembly, rear cover, suspension tube, brake beam, dash pot, buffer ,oil thrower, top casting, brake cylinder(ferrous), bottom casting, lower spring beam, oxy. cut ferrous ball bearing, miscellaneousellaneous spares parts of valve & cock, draft pad, screw coupling, yoke , hand bar, pull road, cam shaft, axle cap, ferrous bearing of sorts and sizes, ferrous part of different type of valve, collar ,ring, racer, socket head, jumper head, felt ring, ms cylinder, buffer casing, draw bar hook, hanger block, chain bolt, chute plate, wear plate, flap plate, draft gear, brake cylinder, pinion, impeller, schaku coupler parts, traction motor parts, nut bolts, pin, icf bogie component and miscellaneousellaneous ferrous items etc. as available in the lot, except any non ferrous.qty-140mt.location-east of vm road in ncb-10.
Tender For auction sale of depot ferrous scrap - p.l no. 98050047. scrap c & w fittings consisting of bolster hanger, anchor link, c buffer flange, control arm assembly, equalising stay, brake head, striker block, face plate, locking plate, spare parts of brake cylinder, crank shaft of main compressor, knuckle, cbc, cbc coupler, axle box, laminated pole shoe, housing, bcn door, tension rod assembly, rear cover, suspension tube, brake beam, dash pot, buffer ,oil thrower, top casting, brake cylinder(ferrous), bottom casting, lower spring beam, oxy cut ferrous ball bearing, miscellaneousllaneous spares parts of valve & cock, draft pad, screw coupling, yoke, hand bar, pull road, cam shaft, axle cap, ferrous bearing of sorts and sizes, ferrous part of different type of valve, collar, ring, racer, socket head, jumper head, felt ring, ms cylinder, buffer casing, draw bar hook, hanger block, chain bolt, chute plate, wear plate, flap plate, draft gear, brake cylinder, pinion, impeller, schaku coupler parts, traction motor parts, nut bolts, pin, icf bogie component and miscellaneousllaneous ferrous etc. as available in lot, except any nonferrous. qty-132mt. location-east of vm road in ncb-11.
Tender For tender for supply of wagon spares - material specification bogie pivot pin roso drg.no: wd-85079-s2 item 5 for casnub 22nl, 22nlb bogie. narrow jaw adapter for casnub 22nl/nlb bogie class 'e' 6 x11 rdso drg wd-89067-s-09 alt-7 or latest, roso spcn ab/rb-39-2002 (rev4) wedge, rdso drg no.-sk77579 snubber spring wd-83069 s/1,item 3. conforming to rdso specification wd-01-hls-94 (rev.3) bolster spring outer wd-83069 s/1 item 1 bolster spring inner wd-83069 s/1, item 2 12" air brake cylinder (without fulcrum bracket) for b.g freight stock (btap wagons) brake cylinder 300 mm, spec. no-02-abr-02 with amendment no-4 and appendix-b, roso drawing no-wd-92051-s-11 alt-3 special note: above air brake cylinder for freight stock (btap wagons) is to be supplied without fulcrum bracket. piston packing for 12" air brake cylinder of freight stock (btap wagons) rdso drg. no. wd-92051-s-11 alt-3, item 4, part drg. no. wd-92051-s-15 alt-nil, conforming to rdso specification 02-abr-02 wear ring for 12" air brake cylinder of freight stock (btap wagons) rdso drg. no. wd-92051-s-11 alt-3, item 5. part drg. no. wd-92051-s-14, item 3, as per roso specification 02-abr-02 cut off angle cock with vent for broad gauge freight wagons (btap/btcs/btpn) as per rdso drg. no. wd-88123-s-01 alt-2, specification no. 02-abr-02 with ammendment no. 4 of sept. 2016 and appendix-d piston packing for 14" air brake cylinder of freight stock (btcs wagons) as per rdso drg. no. wd-92051-s-06 alt-5, item 4, part drg. no. wd-92051-s-10, alt-nil, as per rdso specification no. 02-abr-02 wear ring for 14 air brake cylinder of freight stock (btcs/btpn wagons) as per rdso drg no. wd-92051-s-06, alt-5, item 5, part drg. no. wd-92051-s-09, item 3, as per rdso specification no. 02-abr-02 yoke pin, item-12, rdso drg sk-62724,rdso spcn: wd-7bd-10
Tender For set of 160 kn air spring assembly for fiat type bogie as per rdso str no. rdso/2020/cg-01.scope of supply shall be as per clause 4.1 of rdso str no. rdso/2020/cg-01. each set will consist of four air spring assembly. following items shall be supplied as persl.no. 12 of annexure viii of rdso str no. rdso/2020/cg-01 as loose and packedseparatelyper air spring assembly - (a) high tensil hexagonal socket head cap screw - 4 nos; (b) hardened and tempered washer - 4 nos ; (c) prevailing torque type hexagonal nut m20 - 4 nos. the following additional spares also are to be supplied and packed separately per coachest. (i) sealing o- rings - 2 nos; (ii) high tensile hexagonal socket head cap screw ? 4 nos; (iii) hardened and tempered washer - 4 nos. (iv) prevailing torque type hexagonal nut m20 4nos. [ warranty period: 30 months after the date of delivery ] ]
Tender For corrigendum : single source procurement of spares of brake and pneumatic system - particulars: with part no., o/h kit of ucmv(i82555/110) (xki/kit/01068 ), o/h kit of ebmv (xki/kit/00454), valve magnet for antiskid valve (et-ii31211/024), pbps (ii80873/04535), bcps (ii80873/00604), oil trap for main compressor (ii57045), micromesh oil filter (b92794), dessicant (503328), fine mesh filter ( b68650), sealing ring (a31371/3), sealing ring (b5713), sealing ring (453831), gasket with drain screw plug (b80896/5), screw plug (b68652), inlet vane ring for compressor (8.000.8.923.715.5), pressure reducing valves (i22145), oil filter cartridge for main compressor (c100495), air filter element for main compressor (8.000.8.923.716.5), cup filter (i11775), inclined filter (ii53435), oil separator (ii47482/oe03a09), air drier (ii67572/18110), bpps dt-car (ii80874/05047), bpps m-car (ii80874/04535), transducer bcu (stn29889), transducer bcu (stn29890), valve magnet (ii15976/110), transducer of mr (stn29889), levelling road (valve) (i55029/1), levelling road (valve) (i55029/2), support flange (a48148/2), hand drain valve for adv (i94095), double pressure gauge(sr/bc) (ii55802/10-008), double pressure gauge(mr/bp (ii55802/12-018), two way valve (i15658), air hose for mr/bp(b22,23) with end fitting (ii90265/10016nn), air hose for uncouple(w03)with end fitting (ii90265/10008nn), air hose for sevice brake(b13)with end fitting (ii90265/06416nn), air hose for parking brake(b14)with end fitting (ii90265/06006nn), air hose for sevice brake on bogie(c04)with end fitting (ii90265/06416nq), air hose for parking brake on bogie(c05)with end fitting (ii90265/06508nq), air hose for main compressor(a02)with end fitting (ii90265/05425nn), air hose for auxiliary compressor(u02)with end fitting (8.000.0.939.701.5)
Tender For auction sale of depot ferrous scrap - 12161ms26b, 98050011, quantity- 159.920 mts. scrap condemned unserviceable ms- cs mixed scrap of carriage and wagon and loco items consisting of bolts, nuts, pins, washers, cotters, head blocks, distance blocks screw rods, handle supporting bare plates, ms back locks, mmts racer cover, locking screws, nuts, bmbc components, jigs fixtures and loose spares, safety nuts, jack wheel arms, schaku couplers, coupler spares, tension rods, sheet cut pieces, levers, links, iron skids, anti roll bar with fork link, pins electroplated, cut pieces of angles, pipes, channels, flats, plates, rod cut pieces, sabs, cbc housings, common pipe bracket, pivot caps, buffer plates, cbc coupler handles, coupler rods, barrel bush, silent blocks, shackles, wide jaw adaptor, clamps, compensating ring, wire rope, push pull rods, towing trolley, jack frame, anchor links, lashing chain assembly, destroyed hangers and blocks, cap for fuel inlet pipe assembly, cbc back stopper plates, brackets, gear wheels, sheets, pivots, washers, equalizing stays, dampers, shock absorbers, dmb rings, dashpots, trolley wheels, brake shoes, compressor parts, brake heads, keys, dip lorry wheels, stays rings, chain cut pieces, draw bar spindle rod, draw bar support beam, ferrous scrap of emus, body gear, under gear, spring gear, draw gear, cbc operating handle, cbc supporting device, cbc support plate, air spring suspension bellow, suspension rod, socket, ring retainer, long bolts, mmts rear cover, speedo meter cover, retainer cap, brake cylinder, brake calliper, center pivot, equalizing lever, axle box covers, berth and door frames, filters, lever hangers, ci cylinder bodies, diesel loco items, ci hose cocks, piston, piston trunk, ratchet with screw rods, flanges, destination boards, small dia. springs, hooks, articulated lock lift lever assembly, collars, links, pivots, cylinder body, bp and fp cocks, c.r.tank, locking screw, locking cups, dmb ring, sab end push rod, sand ejectors, adaptors, wearing plate, centre pivot cover, z levers, springs, caliper bolts, reducing bushes, control arms, seaters, center pivot tops, pull rods, punching dies, round rods, bogie under frame cut pieces, ms drilling jig, horizontal bolts, hex bolts with nuts, dividing plates, side bearer guide, lever box, center pivot bottoms, ct rb bearing components, fabricated structures of sorts and sizes, with or without attachments of rubber, fiber, nylon bushes and other similar carriage, wagon, mmts, emu, dmu and loco items including rusted and corroded sheets. location- bin no- 161, left side of road no- 1. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only. special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery, as per motor vehicle act 1988.