Latest building item scrap Tenders | Government building item scrap Tenders

State Government

CTN :42966383

04 Dec, 2025 30.00 Lacs

Kota - Rajasthan

Tender For name of work:- rmc to nagpura. - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special applicator mach

State Government

CTN :42972796

05 Dec, 2025 72.80 Lacs

Sepahijala - Tripura

Tender For mtc. of road from takarjala to gobinbari (l=6.25km)under jampuijala block, sepahijala tripura/s.h:- wbm-3, carpeting, seal coat,paver blocks,drain etc. during the year 2025-26(portion from 3.00 to 6.25km).

State Government

CTN :42915120

03 Dec, 2025 90.65 Lacs

Kota - Rajasthan

Tender For - rmc to mawasa - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special applicator machine complete wi

State Government

CTN :42955278

03 Dec, 2025 24.12 Lacs

South Tripura - Tripura

Tender For mtc. of road from nh-08 to achaichi mog para (mla para) (l=3.50 km) / sh:-metaling, grouting, re-carpeting, tack coat, seal coat, pucc drain etc. during the year 2025-26 (gr-ii).

State Government

CTN :42955279

03 Dec, 2025 23.22 Lacs

South Tripura - Tripura

Tender For mtc. of road from purba pilak to bagmara via sukulbari (l= 5.50 km) / sh:- grouting, wbm iii, re-carpeting, seal coat, surface drain, palasiding, gunny bag placing etc. during the year 2025-26. (portion from ch.2.50 km to ch. 3.640 km) (group- i)

State Government

CTN :42955280

03 Dec, 2025 24.19 Lacs

South Tripura - Tripura

Tender For mtc. of road from jolaibari-kowaifung road to naba ram para (l=1.444 km)/ sh:-metaling, grouting, re-carpeting, tack coat, seal coat, surface drain etc. during the year 2025-26

State Government

CTN :42644051

08 Dec, 2025 49.01 Lacs

Ukai - Gujarat

Tender For corrigendum : work of complete replacement seal plate and seal trough bowl in bottom ash hopper and fabrication, erection and strengthening of ba hopper plate and structure also providing and applying of 2 coat of epoxy paint in unit 3 to 5 during repair and maintenance at gsecl ukai tps. (wt-5037 ahp-2).

CTN :42964036

08 Dec, 2025 NA

Senapati - Manipur

Tender For supply of paint , 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick ac building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers , synthetic rubber adhesive in 1 ltr container , corner glass self 200mm make jaquar oblique cera , thread roll , plastic rawal plug 40mm long , bracket for whb , extention nipples 15mm x 50mm , hex nipple cp 15mm x 50mm , hydraulic door closer , door stopper , sliding door bolt aluminium 200mm , suspenders for for e-board ceiling , clips holder for e-board ceiling , e-board false ceiling size 60cmx60cmx4mm , glass panes 3mm , half threaded screw 35mm , full threaded screw 25mm , low plug 35mm , half threaded screw 25mm , door handle 150mm , sand coarse locally available best quality , fine aggregate sand for concrete , 20mm thick 2nd class hard wood planks clean swan 25cm wide and 2. 40 to 3. 00 mtr long , ditto but with waste hole of ptmt minimum weight 100 gms , wire nails of any size , aluminium extruded handle 100mm size , aluminium extruded barrel tower bolt 150mm , aluminium sliding door bolt 300mm long , glue for lime , 12mm thick particle board , sheet assembly consisting of 5. 5mm thick sheet glass shelf 12cm wide with chromium plated bracket and railing 60mm long , varnish finishing interior or exterior , french polish , distemper , 18mm pre laminated particle board, grade 2 quality, interior grade, commercial type , exterior emulsion paint weather proof of 1st quality isi marked of the following make asian oblique apex ultima oblique berger oblique indigo , painting brush 10cm flat size , painting brush 7. 5cm flat size , painting brush 2. 5cm flat size , lime unslaked best quality fat lime , wooden screw 25mm to 40mm long size as reqd 100 nos per pkt , wooden screw 15mm to 20mm long size as reqd 100 nos per pkt , m seal 500 gm pack , writing brush flat size no 1 , writing brush flat size no 2 , writing brush flat size no 3 , writing brush flat size no 4 , pvc bracket plain for 20mm dia rod , pvc bracket angle for 20mm dia rod , fancy bracket plain for 25mm dia rod , fancy bracket angle for 25mm dia rod , centre support for 25mm dia rod , lime colour blue in 100 ml packet , ms window peg stays long , rubber cill door bottom , stell peg set of six , indigo platinum series fllow coat emulsion paint of isi marked of colour rred oblique grey oblique white oblique yellow etc. make ndigo oblique asian oblique berger oblique granostone , water proof designer wall oblique floor laminates self adhesive of size 0. 8mm to 1mm thick of glossy, matte, texture finish of colour red, white and plain isi marked , sand paper , scrapper , roller for paint , ppgi roof sheet corrugated , plain sheet , self tapping screws , wooden beading , spindle no 3 , spindle no 2 , hasp and staple , wooden battens n. exc 3 sqm , pvc lipping , f oblique cistern washer , f oblique cistern handle , bib cock washer all types , veneer board 8 feet x4 feet x1mm , wall rounted rectanglur glass sholves , 20mm nominal graded crushed stone aggregatemirror loking 24"x18" with pvc frame , pvc bathroom cabinet mirror size 450x350mm, wash hand basin 500x400mm, ewc white colour , wash hand basin 450 x 350mm, pvc wall laminates, water tank 500 ltr, water tank 1000 ltr, cascade type ewc model-sf 9640 rimless, size 360x725x735mm, felt roof bituminius (pbs roll), extra patch, helical door closer, common burnt clay building bricks class b (size 230 x 115x 75mm), 2nd class h/w clean swan scantling in section exc 40 sqcm in section. , mdf board 20mm thick, gi tubing 15mm medium grade, wc european 's' type, cabinet mirror 450x300x125mm , lid for //bid details2 / 95

State Government

CTN :42986691

08 Dec, 2025 24.26 Lacs

Unakoti - Tripura

Tender For maintenance of different roads within kailashahar municipal council area during the year 2025 26 sh patch soling, patch metalling, grouting, recarpeting, seal coat, paver block, etc

State Government

CTN :42990547

05 Dec, 2025 24.23 Lacs

South Tripura - Tripura

Tender For sh-metaling, grouting, re-carpeting, tack coat, seal coat, surface drain etc. during the year 2025-26.

Building Item Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors