Latest building structure Tenders | Government building structure Tenders

State Government

CTN :45700520

10 Jul, 2026 8.06 Lacs

Midnapore - West Bengal

Tender For construction of a student cycle parking shed( with building structure ) at debipur milan vidyapith

Central Government/Public Sector

CTN :45606296

03 Jul, 2026 NA

Korba - Chhattisgarh

Tender For corrigendum : preliminary inspection for carrying out condition assessment of township buildings structures at ntpc korba

State Government

CTN :45684841

01 Jul, 2026 NA

Chandrapur - Maharashtra

Tender For material required gp mangli arab tah nagbhid dist chandrapur - 80 mm metal white (hand broken metal with royalty), 40 mm metal white (hand broken metal with royalty), 80 mm, 40 mm, 20 mm, 12 mm, stone dust, , , , , 16 mm, 12 mm, 10 mm, 8 mm, , , , window, paver block, oil paint, oil bond destembar, acrylicpolymermodified liquid, , , , ms (grill work), , , , 1 1, wash besin, , 15 mm pvc pipe, 20mm pvc pipe, 25 mm pvc pipe, 32 mm pvc pipe, 1/2 , 1 , 1 , 1/2 , 100 mm pvc pipe, sintax 500 lt., sintax 100 lt., saddie, , rcc pipe 900 mm, rcc pipe 800 mm, rcc pipe 600 mm, rcc pipe 450 mm, rcc pipe 300 mm, pvc pipe 150 mm, pvc pipe 110 mm, pvc pipe 90 mm, pvc pipe 75 mm, pvc pipe 65 mm, 2 3, 7 8, , , , ferud, birla white, , , water tank, , jcb, , , gi pipe, solar pannel, solar panel connector, dc wire, ac wire, solar pump controler 1 hp, solar pump controler 2 hp, solar pump 1 hp, solar pump 2 hp, reduser, nipples, hdp , gil socket, upvc pipe 2 inch, upvc pipe 3 inch, upvc t 1/2, tank conector, rope waterproof, ms tank structure, gi tank structure, ms angle, j bolt, ms pipe, gi sheet, walve, inwell bore driling, cotter pin, inwell bore pipe, battery lithium, 75 wp spv module, ms powder coated battery box, gi barbed wire, rcc modern bench (3sheet), solar lugs, dc fuss, distic water, ro 25 ltr aqua, ro 50 ltr aqua, off grid inverter solar, semi intgreated solar light, brekar, gi high mast pole, dustbin

Private Sector

CTN :45705069

08 Jul, 2026 42.50 Crore

Mumbai - Maharashtra

Tender For auction sale of industrial property - description of immovable propertyindustrial property situated at plot no.63 to 76, 90, 91, 92, 93 and 94/old s.no.237/1, as per patta new s.no.237/6, industrial estate, alathur village, tiruporur taluk, kanchipuram district, pincode 603 104, tiruporur sro along with all buildings, structures, plant & machinery, installation constructed, erected or installed as more particularly set out in terms and conditions.

State Government

CTN :45685523

08 Jul, 2026 44.62 Lacs

Bharuch - Gujarat

Tender For providing and supplying furniture for iti valia, dist.bharuch - providing and supplying high-back chair with a durable metal framework, upholstered with artificial leather/leatherette and molded pu foam. the chair shall include molded seat and back covers, with the back foam ergonomically contoured to provide lumbar support for enhanced comfort. the chair shall be equipped with high-durability casters and a hydraulic system. it must feature a gas lift cylinder with a minimum 5-year warranty. the overall dimensions of the chair shall be approximately 53 cm (w) x 79 cm (h) for the back, and 51 cm (w) x 49 cm (d) for the seat. the pu foam shall be molded with a density of 45 ± 2 kg/m³. the chair shall have one-piece armrests that are scratch and weather resistant. it shall be equipped with a permanent contact mechanism allowing 360° rotation, 12° seat tilt, and 19° back tilt with a front pivot for tilting, ensuring the user's feet remain on the ground for added comfort. additional features shall include tilt tension adjustment, static seat depth adjustment of 0.5 cm, 5-position locking system, and an anti-shock back mechanism to prevent sudden impact when the backrest lock is released. it shall be confirmed and approved in advance by the architect, along with a description and image, or as directed by the engineer-in-charge. , providing and supplying medium-back chair with a durable metal framework, upholstered with changeable fabric upholstery covers (as per requirement) and molded pu foam. the chair shall include molded seat and back covers, with the back foam contoured to provide lumbar support for added comfort. it shall have high-durability casters and a hydraulic system with a gas lift cylinder having a minimum 5-year warranty. chair dimensions shall be approximately 47.5 cm (w) x 58 cm (h) for the back, and 49 cm (w) x 48 cm (d) for the seat. the pu foam shall be molded with a density of 45 ± 2 kg/m³. the chair shall include one-piece armrests that are scratch and weather resistant. it shall be equipped with a permanent contact mechanism offering 360° rotation, pneumatic height adjustment, 17° maximum tilt, and tilt tension adjustment. it shall be confirmed and approved in advance by the architect, along with a description and image, or as directed by the engineer-in-charge. , providing and supplying law back chair for work center & other staff the seat & back are made of m.s frame work. upholstered with changeable fabric upholstery covers (as per requirement) and molded pu foam, together with molded seat & back covers. the back foam should be designed with contoured lumber support for extra comfort. caster of high durability & hydraulic. the chair should have cylinder with 5 years warranty. the size of chair 45cm x 45cm (back side) and 45cm x 43cm (seat size). the pu foam should be molded with density =45 ± 2 kg/m3 .with one piece armrests. the armrests are scratch and weather resistant. the permanent contact mechanisms is designed with 360° revolving type, with pneumatic height adjustment & 17° maximum tilt only & tilt tension adjustment facility. complete as per sample approved and as directed by the architect and approved by the engineer in charge , providing and supplying visitor or guest chair with seat and back made of 12 mm thick hot-pressed plywood, upholstered with changeable fabric upholstery covers (as per requirement) and molded pu foam, along with molded seat and back covers. the back foam shall be contoured to provide lumbar support for enhanced comfort. the chair dimensions shall be approximately 45 cm (w) x 38 cm (h) for the back, and 45 cm (w) x 43 cm (d) for the seat. the pu foam shall be molded with a density of 45 ± 2 kg/m³. the armrests and legs shall be fabricated from powder-coated mild steel (ms) structure as per architect's selection. the seat and back shall be securely fixed to the ms structure using all necessary hardware. it shall be confirmed and approved in advance by

Central Government/Public Sector

CTN :45693091

16 Jul, 2026 6.10 Lacs

Dakshina Kannada - Karnataka

Tender For consultancy for preparation of architectural, structural design drawings and estimation, market analysis of buildings/ structures for provision of indoor integrated complex comprising swimming pool, basketball court and associated works at cgra kunj

CTN :45671410

07 Jul, 2026 NA

Ferozepur - Punjab

Tender For material and labour for construction of 06 x toilet cum bathing cubicle (4/4) in ferozepur - toilet cum bathing cubicle structure with pre-fab colns, purlins, rafters, wall (gi metal skinned puf panels), ppgi roof. pvc door (08 nos) of size 750 x 2100 mm and aluminum ventilator (08 nos) of size 450 x 450 mm, including all necessary fixing arrangement and fittings accessories as per tech specification and drawing att., well burnt common building bricks of sub class b of size 23 x 11.5 x 7.5 cm conforning to is: 2212-1991, opc (43grade) confirming to is 8112 in 50 kgs hdpe bags (make -ultratech/ ambuja/acc), 20mm graded stone aggregate (crushed) conforming to is-383 1970. they shall be clean, hard, tough, durable and of uniform quality throughout. the aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities., 40mm graded stone aggregate (crushed) conforming to is-383 1970., they shall be clean, hard, tough, durable and of uniform quality throughout. the aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities., interlocking tiles of size (200 x 120 x 60 mm thick gde m-35) i section of best quality., fine sand shall be clean, free from adhesive coating and shall not contain clay, mica and other impurities. the maximum quantities of clay and fine silt in sand shall not be more than 5% by mass as per is-383-1970., hard core stone aggregate 50-63 mm size., non skid ceramic floor tiles of size 400 x 400 x 7 to 8 mm thick. they shall be abrasion resistant conforming to is-15622, make: johnson/ kajaria/somany, looking mirror size 600x450mm of best quality aluminium frame and brass screw and washer for fixing with wall panel. make: modi guard /saint goban, white cement. make:- jk/ birla, water proofing compound, cement based paint for external wall. make:- shalimer/ asain/ berger, welding rod, oil bound distemper (off white) make: shalimer/asain/ berger, sand paper, turpentine oil, painting brush 4"., painting brush 2"., red oxide primer. make:- berger / shalimar / asian, paint synthetic enamel black colour. make:- berger / shalimar / asian, ms flat 35 x 3 mm, cp soap dish 125 mm. make: - hindustan/ jaguar/ sona/ prayag, angle iron staging of size 1.5 x 1.5 x 2.5 m with vertical ms angle columns of size 50 x 50 x 6 mm with 3mm thick ms sheet fitted at top of the staging work as shown in drg along with connecting accessories make: jindal/tata/sail/rinl, 1.25 mm thick ms sheet manhole cover of size 600 x 600 mm, incl ms handle of size 25 x 5 mm, with angle iron 40 x 40 x 5 mm all around and cross bracings. make: jindal/tata/sail/rinl, soakage pit cover of size 2.56x1.56m with angle iron 50 x 50 x 5 mm with all around and cross bracing and 1.25mm thick ms sheet including 600 x 600 mm suiteble opening cover with handle, septic tank cover of size 2.0 x 1.22m with angle iron 50 x 50 x 5 mm with all around and cross bracing and 1.25mm thick ms sheet, rotational moulded high density polyethylene water storage tank (cylinderical vertical tank) of 1000 ltrs capacity as per is 12701 of 1996 along with 20 mm dia brass valve with pvc float ball. make: - sintex/ polycon/ hindustan, gi socket 15 mm, isi marked. make: jindal/tata/sail/rinl, gi elbow 15 mm, isi marked. make: jindal/tata/sail/rinl, gi tee 15 mm, isi marked. make: jindal/tata/sail/rinl, gi union 15 mm, isi marked. make: jindal/tata/sail/rinl, cp bib cock 15 mm dia long body isi marked. make: - jaguar/ onida/hindware, gl pipe 15 mm dia, isi marked, make: jindal/tata/sail/rinl, gi nipple 15 mm 3" long, isi marked, make: jindal/tata/sail/rinl, gi plug 15 mm, isi marked, make: jindal/tata/sail/rinl, 15 mm dia pvc connection pipes, isi marked, gi socket reducer 20-15 mm, isi marked, make: -jindal/tata/sail/rinl, gi pipe 20 mm dia med grade, isi marked, make: -jindal/tata/sail/rinl, gi socket 20mm, isi marked, make: - tata/ jindal/ ravindra, gi elbow 20 mm, isi marked, make: jindal/tata/sail/rinl, gi tee 20 mm, is

CTN :45705068

08 Jul, 2026 1.44 Lacs

Bangalore - Karnataka

Tender For auction sale of land - all that piece and parcel of land, having an extent of 1210 sq. ft or 112.41 sq.mtr in old s.f.no. 295a, 296a and new r.s.no 105/1 together with buildings, structures and all improvements thereon in veeriyankeenarupalayam natham, aavalampalayam village, nambiyur panchayat union, gobichettipalayam taluk and within the sub-registration district of kunnathur and registration district of gobichettipalayam district. boundaries: to the east vacant poromboke land/road, to the west: house of sengottaiyan, to the north: the land belonged to kuppanna gounder, to the south: the land belonged to krishnamurthy.

CTN :45676221

02 Jul, 2026 38.47 Lacs

Silvassa - Gujarat

Tender For dismantling of govt. buildings/structures in ut of dnh (7th call)

Central Government/Public Sector

CTN :44949096

27 Jun, 2026 48.17 Lacs

Jaduguda - Jharkhand

Tender For bid to ras tender for supply of internal external painting including repair works of 28 nos a type blocks at nwp : : - white washing with lime to give an even shade old work two or more coats , painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade one or more coats on old work , removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete , repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground all complete as per direction of engineer in charge with cement mortar 1 ratio 4 1 cement 4 fine sand , finishing walls with acrylic smooth exterior paint of required shade old work two or more coat applied at the rate 1.67 ltr per 10 sqm on existing cement paint surface , demolishing r.c.c. work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge. , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1 2 4 1 cement 2 coarse sand zone iii 4 graded stone aggregate 20 mm nominal size , steel reinforcement for r.c.c. work including straightening , cutting , bending , placing in position and binding all complete above plinth level. thermo-mechanically treated bars of grade fe 500d or more. , centering and shuttering including strutting , propping etc. and removal of form for lintels , beams , plinth beams , girders , bressumers and canti , providing and fixing double scaffolding system cup lock type on the exterior side of building structure , upto 25 metre height , above ground level , including additional rows of scaffolding in stepped manner as per requirement of site , made with 40mm dia m.s. tube

Building Structure Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

Private Sector

State Government

Central Government/Public Sector

Central Government/Public Sector