Latest bulk meter Tenders | Government bulk meter Tenders

State Government

CTN :45738672

20 Jul, 2026 8.45 Lacs

Bangalore - Karnataka

Tender For installation & commissioning of bulkflow meter (bulk water connection) for the 5mld water supply in kanagala industrial area, hukkeri taluk, belagavi district.

Central Government/Public Sector

CTN :45713835

18 Jul, 2026 30.00 Lacs

Mumbai - Maharashtra

Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

CTN :45415159

25 Jun, 2026 4.58 Lacs

Chandigarh - Chandigarh

Tender For corrigendum : repair and maintenance of tube wells and boosters including repair of water level gauge, ms panel, sluice valves and allied items of civil / electrical at various buildings i.e. punjab raj bhawan, haryana raj bhawan & residence sector-7, under maintennace booth, sector-7, chandigarh. (ch to: 2216 (np) mtc. and repair ) - repair of ci sluice valve up to 150 mm dia including dismantling, repair / replacement of spindle, nut , rubber packing, nuts and bolts complete., up to 100 mm dia, lifting and lowering of submersible pump set including dismantling of flenged joints, taking out column pipes, re-jointing etc including replacement of defective packing, nuts and bolts etc complete, tube well, booster, supplying and fixing of single phase preventor make minilec or equivalent model of approved make to the satisfaction of eic , supplying and fixing of current transformer ( ct ) for ampere meter of suitable rating complete., supplying and fixing of overload relay of following capacities, 14 to 23 amp, 30 to 42 amp, 45 to 75 amp, providing and fixing of star delta starter timer of make l&t or equivalent model of approved make to the satisfaction of eic, providing and fixing of kit kat 500 amp complete in all respect, supplying and fixing of capacitor of 20 to 50 mfd make l&t, siemens or equivalent model of approved make to the satisfaction of eic , supplying and fixing of analog meter of make l&t ( rishabh ) or equivalent model of approved make to the satisfaction of eic , volt meter, ampere meter, supplying and fixing of 3 pole mccb of following capacity of make l&t, bch, havells or equivalent model of approved make to the satisfaction of eic , 100 amp, supplying & fixing of contactors block of make l&t, bch or equivalent model of approved make to the satisfaction of eic , mnx - 25, mnx - 32, mnx - 50, mnx - 70, supplying and lowering of submersible cable 16mm2 of make havells, finolex, l&t or equivalent model of approved make to the satisfaction of eic , supplying and lowering of submersible cable 25mm2 of make havells, finolex, l&t or equivalent model of approved make to the satisfaction of eic , providing and fixing hydro pneumatic pump of size 0.5 hp of approved make with 24 ltr capacity tank, pressure switch, pressure gauge, nrv accessories and making connections complete of make crompton or equivalent model of approved make to the satisfaction of eic, repair and rewinding of submersible pump set including carriage from installation to workshop and back. the rate include replacement of all defective parts of pump and motor rewinding., 5 hp, 7.5 to 10 hp, 35 hp to 55 hp, repair and rewinding of monoblock submersible pumping set including repacement of defective parts as required and carriage from installation to workshop and back., 0.5 h.p, 1 h.p, 2 h.p, manufacturing, supplying and fixing of ms control panel 16 gauge of size 600x700mm with door including wiring of inside panel, complete in all respect, providing and fixing of self pumping monoblock single phase pump for boosting of make crompton or equivalent model of approved make to the satisfaction of eic, 0.5 h.p, 1 h.p, 2 h.p, providing and fixing of pressure gauge make h-guru or equivalent model of approved make to the satisfaction of eic, providing and fixing of elcb 63 amp make l&t/havells or equivalent model of approved make to the satisfaction of eic, repair of internal control wiring 1.5mm wire with thimbles, nut bolt etc. complete

State Government

CTN :45414122

17 Jun, 2026 1.90 Crore

Jalandhar - Punjab

Tender For corrigendum : prov installing and drilling of 550 mm dia bore with reverse rotary rig up to 160 mtr. depth including cost of 20 mtr stainless strainer const of pump chamber pumping machinery di fitting rising main ohsr of 250 kl capacity complete in all respect. - augmentation of water supply scheme village padhiana block adampur distt. jalandhar (under head: nabard 31/4215) providing, installing & drilling of 550 mm dia bore with reverse rotary rig up to 160 mtr. depth including cost of 20 mtr stainless strainer, construction of pump chamber of size 3.05m × 3.70m with wc, providing & installing pumping machinery, di fitting, disinfections unit, rising main(10kg/cm2), household connections with water meter and distribution system, solar panel, bulk meter, environmental charges, development of water works, construction of 1 no. ohsr of 250 kl (2,50,000 ltrs) capacity with sill level not less than 23.50m height upto fsl 27.50 m from formation level complete including the cost of inlet, outlet, overflow & scour & vertical pipes, di duck foot bends, expansion joints, puddle collar, lightening conductor, earthing, aluminium ladder inside the ohsr stair case, scour/overflow sluice valves, d/f extension joints, automatic electronic water control device and construction of plinth protection around ohsr, all civil works as per site complete in all respects.

State Government

CTN :45397751

10 Jun, 2026 1.67 Lacs

Cherthala - Kerala

Tender For deposit-csme- extension of 63mm pvc distribution line and providing bulk meter connection for marigold apartments in cherthala municipality-pipeline work

corporations/Associations/Others

CTN :45440231

17 Jun, 2026 6.30 Lacs

Kolkata - West Bengal

Tender For 4 inch dia. 100 mm new filter water bulk meter connection at national library complex belvedere road, alipore, kolkata 700027. - 4” dia. (100 mm) new filter water bulk meter connection at national library complex, belvedere road, alipore, kolkata – 700027.

Central Government/Public Sector

CTN :45077968

26 May, 2026 NA

Jodhpur - Rajasthan

Tender For multi-function meter, ct/pt site programmable for input voltage measurement 50-550v ac, l-l, ct-1/5a, aux. supply 24/110v dc, led/lcd digital display, 96 sq. cm, class-1.0, for measuring parameter v, a, f, pf, kw, kva, kvr, kwh, kvah, kva, rh, run hours on hours, phase angle interrupts thd events (high, low) for switch board cabinet for hog compliant lslrd coaches as per rdso specification no. rdso/pe/spec/d/tl/0195-2019 (rev.0). makes as per bom special repair no.13 of rdso specification [ warranty period: 30 months after the date of delivery ]

CTN :44705138

21 Apr, 2026 NA

Bhilai - Chhattisgarh

Tender For corrigendum : biennial rate contract for supply of forbes marshall spares installed at various nspcl stations - dual seismic vibr.monitor, make:shinkawa, ramp diff.exp.monit:vm5n9101100010010020, hpt rotor expansion cable, fw-263fa-80, velocity sensor,model no cv-861,shinkawa, casing expans ipc:extn.cable:lw-010b-s-0, relay o/p module;shinkawa(vm-5y1-02), shaft vib direct, fl-202f08a-m2-00-03-10, vibratn monitr:dual seismic,0-50mm,vm-5u, sensor rotor hpt,fl-263f50a-m1-00-04-10, hp rotr exp:driver for hpt,fk-263f-6-3-1, ecs(8 mm)for a/s model:fl-202 f08a-m2-0, 4m ext.cable tsi a/smodel: fw-202fa-40, driver for 5m cable a/s model: fk-202f1, loop pwr vib sensor, extension cable 10 mtr ss, forbe marshal:ui-20n actuator repair kit, forbe marshal:ui-30n actuator repair kit, electronic card:48v power supply, electronic crd:pwr sply pcb for dcem2100, electronic card:fmdcem21xx baseboard pcb, electronic card:fmdcem21xx, ddu keypad, blower unit:air purge assy m4x12pan head, transreceiver:assy with 10m cable, eddy curnt. sensr,fl-202f08r-m2-00-03-10, eddy curnt. sensr,fl-202f08l-m2-00-03-10, velocity sensor: cbv160; shinkawa, 5 mtr detachable cable for cbv-160, ph analyser:ph sensor, sp.cond.meter:sp. cond. sensor for swas, 10 mtr extension cable for cv 861 sensor, cable:exten cable l=5 m for cv 861sensor, pwr supply unit,for vms,model no.vm-5z1,, shaft vib rev,fl-202f08r-m2-r5-03-10, proximtr:tsi mod:driver:fk-202f2-1-1/z07, extension cable 8 meter, fl-202fl-80, displacement sensor direct mount type, hp rtr expn:senr 1m cbl-vl-263p50a-1002, proximtr:electr modu:driver:vk-263p4/sys, extension cable 8 meter, vw-263pa-8, non/c eddy currnt sensr(vl-143p25a-1002), driver for ramp diffl expn (lpt)shinkava, extn cable 8 meter for lpt diff expn, axial shift sensr,fl-452f11a-m1-00-03-10, axial shift:driver :model: fk-452f-2-1-1, ext.cable for axial shift,fw-452fa-80, casing expansion hpc:lvdt for casing exp, 4ch. monitor module vm-7 tsi mod:vm-701, power supply:p.s.card:vm751,shinkawa, host communication module model:vm-742, absolute vibrn.monitor: vm-702; shinkawa, hpc:signal conditioner overall exp lvdt, coolers:sample cooler part no. dhx-3, coolant flow indicator p/n. f4w2011550, coolant isolation valve p/n. f4w2011521, ph cell for swas ;part no.- fm1104, cation conductivity cell; k=.01;fm8310, specific conductivity sensor;p/n fm8311, extension cable:tss ext cable 10 mtr, driver for axial shift,fk-452f-2-3-1, ext cable for vibration mod:fw-202fa-80, ele modul:shaft vib driver,fk-202f-2-3-1, proximtr:proximity driver fk-202f-1, forbes marshall:8 ch relay module, local unit:solenoid coil with block, lens:lens assy.for dcem2100, remote control unit:key pad, loop powered vib sensor for ct fan, eccentricity & speed module vm-703b, digital vib ind-ct fan vms, power supply unit,, local communication module with phase marker, communication gateway module, vibration & thrust four channel monitor, tachometer module, 18 ch relay module, key phasor:phase mark sensor with cable, communication module:communication modul