Latest bulldozer spares Tenders | Government bulldozer spares Tenders

Central Government/Public Sector

CTN :41017928

11 Aug, 2025 NA

Katni - Madhya Pradesh

Tender For supply of kit for empty load box device for box-n wagon to rdso drg. no.- wd80007-s-10, alt-26 a s per list of 11 items (1) brake gear shaft to rdso drg. no.- wd-80007-s-10, alt-26, item-12 length sho uld be 2678 mm as part drg no. w/bg-6341.= 01 nos. (2) bracket for e/l (big) to rdso drg. no.- wd-8 0007- s-10, alt-26, item-23 = 01 nos. (3) bracket for e/l (small) to rdso drg. no.- wd-80007-s-10, alt -26, item-24 = 01nos. (4) bell crank to rdso drg. no.-wd-80007-s10,alt-26, item-25 = 01nos, (5) beari ng for long shaft to rdso drg. no.- wd-80007-s-10, alt-26,item-26 =01 nos. (6) shaft bearing with sign plate to rdso drg no. -wd-80007-s-10 alt-26, item-27 = 02 nos. (7) toothed segment to rdso drg. no. - wd-80007-s-10, alt. 26 item 28 = 02 nos. (8) brake gear shaft (short) to rdso drg no. wd80007-s-10 alt. 26 item 29 = 01 no. (9) check coller to rdso drg no. wd80007-s-10 alt. 26 item 30 = 01 no. (10) handle for centre brake rigging to rdso drg no. wd80007-s-10 alt. 26 item 31 = 02 nos. (11) operatin g arm to rdso drg no. wd-80007-s-10 alt. 26 item 35 = 01 no. [ warranty period: 30 months after t he date of delivery ]

State Government

CTN :40984049

21 Jul, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of sugar bag stitching machine spares - bag stitching machine head and spares, servicing of sugar bag stiching machine & installed in this mill (rates to be quoted per day inclusive of to & fro fare etc.), spares for sugar bag stiching machine modle no. sdt/mt of st 500 installed in kichha sugar company, 062013 crank connecting rod, 062031 arm shaft crank (rear), 3/16 s 28017, 9/32 s 28014, 3/8 n 28214, 073021 looper carrier rod head complete, 065262 tension dise. complete, needel gb 250, v-belt a/34, v-belt a/35, foot switch complete, s.s.counter sunk screw with lock nut 1 1/4" x 1/4", slate for beg conveyer mats complete with brass roller in place of pvc roller, bearing no. 6205, bearing no. 6305, oil seal 35x56x10, oil seal 25x40x10, spocket 7 teeth bore 1", spocket 16 teeth bore 1", spocket 16 teeth bore 32 mm, cycle chain of head-up chain, split pin for roller 3/32 x3/4, 061031 lopper shaft bushing (rear), 062021 stud screw for 062013 with nut, 062291 pressure foot lifting lever, 062321 stud screw for 062291, 062301 pressure foot lifting hanger, 062311 spring for 062291, 11/64 s40001 screw for above, 11/64 s40005 screw for above, 065171 tension regulating nut, 9/64 s40042 screw for side plate, knife set (lower and upper), 065384 cutter eccentric assembly, spares for sugar bag stiching machine installed in kichha sugar company model no. special 80000 dx, feed dog 80037, throat plate 80036, preser foot 80035, needel bar 80057 & 80058 (l + r), needle gb 250 long size, looper st 26 x, looper carrier rod head, needle bar with nut ha 56, needle lever ball link 80084, looper side plate, spring for presser foot lifting lever, screw and nut, bolt 10nos, cutter ecentrie assembly, tension disc complete, tension regulating nut, redecon gear complite, motor for stitching machine, moter for conveyer mats

CTN :40963128

14 Jul, 2025 NA

Hisar - Haryana

Tender For supply of repair overhauling of gen set , repair of fuel feed pump , repair of stopper assy , replace of piston ring set , checking and threading of piston sleeve assy , replace of connecting rod , replace inlet valve , replace of exhaust valve , threading of crank shaft , replace of rocker arm , repair of oil pump , cleaning of injector nozzle

CTN :40830467

21 Jul, 2025 12.31 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for admin building, institutes and other buildings and otherphysical facilitys works at jitnagar ta. rajpipla. dist. narmada (package-3) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying & placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 45010 mm(d) x 45010 mm(w) and back size shall be 45010 mm(w) x 40010 mm(h) from seat. overall height shall be 82010 mm, overall depth 53010 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is: 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., benches- supplying and placing three seater bench that shall be constructed from metal frame. the seat and back shall be made of high quality cold rolled ms sheet of 1.2m thick, pressed and welded to form the shape. the seat and back sha

CTN :40830509

19 Jul, 2025 12.64 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for hostels, mess building and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada package-1 - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying and placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 450 10 mm(d) x 450 10 mm(w) and back size shall be 450 10 mm(w) x 400 10 mm(h) from seat. overall height shall be 820 10 mm, overall depth 530 10 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., wardrobe - single unit- single shuttered single unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 450mm (w) x 500mm (d) x 1870mm (h). storage shall have 4 nos. of adjustable shelf. the doors shall be opera

CTN :40939696

14 Jul, 2025 NA

Hisar - Haryana

Tender For supply of repair overhauling of gen set , repair of fuel feed pump , repair of stopper assy , replace of piston ring set , checking and threading of piston sleeve assy , replace of connecting rod , replace inlet valve , replace of exhaust valve , threading of crank shaft , replace of rocker arm , repair of oil pump , replace of injector nozzle

CTN :40916642

11 Jul, 2025 NA

Kargil - Jammu And Kashmir

Tender For supply of talc sheet , alternator assy , head assy , rocker arm assy , over flow pipe with benjo nut , engine mounting pad , avr , head gasket , over flow pipe , overflow benjo bolt , crank shaft oil seal , fuel pump assy , exhaust fan

CTN :40885825

19 Jul, 2025 NA

Leh - Jammu And Kashmir

Tender For supply of reqmt of 15 kva generator spares e e - x3 nk 15kva 001 piston assembly , x3 nk 15kva 002 piston rings , x3 nk 15kva 003 sleeve , x3 nk 15kva 004 cylinder head assembly , x3 nk 15kva 005 rocker arm , x3 nk 15kva 006 double cylinder fuel injection pump , x3 nk 15kva 007 push rod , x3 nk 15kva 008 cr bearing std , x3 nk 15kva 009 crank shaft , x3 nk 15kva 010 nozzle , x3 nk 15kva 011 overhaul gasket

Central Government / Public Sector

CTN :40810137

15 Jul, 2025 NA

Vijayawada - Andhra Pradesh

Tender For supply of load empty gear set consisting of 13 items as detailed below: sl.no. description item no of qty: wd-80007-s-10 1. connecting rod 8 - 01 no, 2. break gear shaft (long) 12 - 01 no, 3. bracket large 23 - 01 no., 4. bracke t small 24 - 01 no, 5. bell crank 25 - 01 no, 6. bearing for long shaft 26 - 01 no, 7. shaft bearing with sign plate 27 - 02 n os, 8. toothed segment 28 - 02 nos, 9. break gear shaft short 29 - 01 no, 10. check collar(bush) for long shaft 30 - 01 no, 11. handle for centre brake rigging 31 - 02 no, 12. operating arm 35 - 01 no, 13. connecting rod for break gear 38 - 01 n o to rdso drg. no. wd-80007-s-10, alt-25. [ warranty period: 30 months after the date of delivery ]

CTN :40792782

11 Jul, 2025 NA

Chandigarh - Chandigarh

Tender For supply of tata vehicle spare parts d d - piston set std , piston ring std , valve guide inlet and exhaust , valve seat , ac ring , ac piston bearing std , oil filter , baby filter , clutch disc , pressure plate , clutch release bearing , fly wheel bearing , water pump assy , fan belt , draklink rod assy , rear door lock inner , rear door lock outer , side glass lock plastic , injector assy , gear lever dust boot , fuel filter , sensor veh speed , air filter inner and outer , temp sending unit , oil pressure switch , slave cylinder lower , alternator assy 12 v , turbocharger assy , fuel pipe tank to feed pump , fuel pipe filter to fip , brake booster with master cylinder , over flow pipe , brake wheel cylinder rear , ac belt , brake wheel cylinder front , fly wheel assy with ring , crank sensor , feed pump , bush gear plate assy starter motor , solenoid switch self 12v , engine mounting , self gear plate , frt lt shocker , rear wiper , dicky lock and tail board lock , air cleaner pipe , center bearing , silencer assy , door beading set , link rod end , ball joint kit upper , ball joint kit lower , arm bush kit , fog light set , bolt torsion bar , arm kit mattel , bearing ftr hub outer , silencer pipe , dicky shocker , steering pipe , brake pipe , brake pipe lock long , silncer packing , seat pocket ) /bid number : gem/2025/b/6368151 * /dated: 20-06-2025 & & / bid document 1 / 49

Bulldozer Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government / Public Sector