Latest bump stopper Tenders | Government bump stopper Tenders

CTN :45527871

22 Jun, 2026 NA

Ajmer - Rajasthan

Tender For supply of rubber hose , major kit kaliper , brake hose front , rubber stopper rear , hose steering pump , dicharge hose assy , rear bump stopper , bearing block anti roller , rubber bush

State Government

CTN :45397974

18 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For corrigendum : work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all l

State Government

CTN :45488213

15 Jun, 2026 44.0 Thousand

Mayabunder - Andaman And Nicobar Islands

Tender For annual repair m/o rural road under sub division iii, swadesh nagar, nacd, apwd, mayabunder during 2026-2027. sw-erection of kilometer and hectometer stone at dukenagar 2.

CTN :44982519

25 May, 2026 NA

West Tripura - Tripura

Tender For corrigendum : supply of mt spare d d - timing kit chain for re , crank pin bearing for re , eng packing kit for re , rear brake shoe assy for re , front brake pad for re , kit rear suspension for scorpio , bumper stopper rear for scorpio , fog lamp with bulb for scorpio , rear upper lh bush for scorpio , rear upper rh bush for scorpio , bolt hexfl for scorpio , flange nut for scorpio , front shock absorber for scorpio , front strut for scorpio , foot step assy for scorpio , air filter element for for scorpio , air filter element for tata safari , bearing assy rear for tata safari , assy rear bush suspension for tata safari , sensor wheel speed for tata safari , bearing block front for tata safari , wiper motor assy for tata safari

Central Government/Public Sector

CTN :45180376

03 Jun, 2026 NA

Sunderbani - Jammu And Kashmir

Tender For supply of out put shaft ngt 520 4wd new , roller bearing main shaft pilot dia , circlip 32-7 , washer elastic , syncro pack 3rd and 4th ngt 520 , assy 3rd gear output shaft v4 , needle cage 40.2x44.2x30 , assy second gear output shaft v4 , syncro pack , spacer first gear , assy first gear output shaft v4 , spacer first gear int bearing 3.35 , spacer first gear int bearing 3.30 , snap ring md gear bearing sp 80 , nut m31x1.5 , circlip 29 , circlip 68-3 output shaft rr bearing , oildeflector rear hsng , 1-counter shaft v4 ngt 520 , bearing retainer plate , spacer counter shaft front bearing , adj shim sub shaft 2.00 , spacer 5th input gear , needle cage n s 5th driving gear , circlip ext lug 52x1.5xph , idler gear reverse , driven reverse , o ring , drain plug , selective shim md gear 1.40 , selective shim md gear 1.90 , snap ring md gear bearing sp80 , bellevelle washer md gear bearing , circlip md gear , gear box oil seal front , gear box oil seal rear , clutch release bearing , insulator front , shift rod oil , out put clutch shaft oil seal , kit shock absorber bushing front assy , shock absorber front , rubber bush , front leaf spring 3 no , center bolt leaf spring , bumper stopper front , retainer plate assy , seal pinion front axle , nyloc nut g.19.05mm 3x4 inch-16-16 , rear brake shoe assy , 4x4 propellar shaft uj cross , oil seal ptee-mdi 4wd , cable parking brake front 75 opt , cable parking brake rear , wheel cylinder assy rh and lh ) /bid number : gem/2026/b/7537517 * /dated: 13-05-2026 & & / bid document 1 / 39

CTN :45067447

12 May, 2026 55.1 Thousand

Kamrup - Assam

Tender For supply of brake shoe - brake shoe , weather strip , link rod , front d bush , brake shoe maj kit , assy rear suspension bush upper link , suction pipe assy firewall to filter , assy ball joints supper wishbone , assy rear bump stopper rear suspension , assy parking brake cable

Bump Stopper Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector