Get complete information related to latest Burglar Alarm Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Burglar Alarm Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Burglar Alarm Tenders.
Tender For supply of hardware carpentry material requirement c c - hardware_carpentory item chap konda security door guards , auto hinges small cupboard , 3 hinges for small cupboard shutter , 4 hinges plywood doors , drawer handle 5 , main door handle 6 , ambroasian tape , door latch tadi patti 10 , aldrop for door 10 , tower bolt 6 , door nut bolt bugdi , mosquito net , batten patti 1 , 32mm flush door 36 x 81 , welding rod , plywood 12 mm 4 x 8 , plywood 18 mm 4 x 8 , plywood 6 mm 4 x 8 , plywood 8 mm 4 x 8 , sunmica 1mm thk , fevicol container , araldite tube 180 gram , hexa blade , curtain socket , curtain rod , cloth hanger 6 hooks , door stopper , nails 14 no x 1.5 , nails 14 x 2 , nails 17 no x 1.25 , nails 19 no x 0.333 , nails 14 no x 1 , screw 50 x10 , screw 60 x 10 , screw 35 x 10 full thread , screw 35 x 10 half thread , full thread screw 35 x 8 , full thread screw 25 x 8 , full thread screw 19 x 10 , bathroom door bolt 3 , main door 32 x 81 , batten patti 0.20 x 0.5 , door magnet for cupboard , door closer , steel cutting blade , wooden cutting blade , drawer lock , steel welding rod , steel welding spray , concrete nail 3 , concrete nail 2 , concrete nail 1.5 , concrete nail 6 , binding wire
Tender For corrigendum : supply of set of hardware item for m/s medha vande bharat bogie assembly as per details below.. set of hardware for vande bharat bogies i.e. (i)spmaet18bogie1074-security plate-a675uv2-70 no. (ii)spmaet18bogie1080-gasket for speed sensors-100 no.(iii)spmaet18bogie1081-set of hardware for front end cover machined-20 sets(iv)spmaet18bogie1082-set of hardware for bearing end pad-20 sets (v)spmaet18bogie1083- set of hardware for axle rear cover machined-20 sets
Tender For supply of description of the item is:-set of pins, bushes for fiat ir bogie as per schedule1 pin. 1901877 ver 00,or latest, qty. 162 bush. 1274591 ver 00,or latest, qty.163 bolt. 1262374 index 2,or latest, qty.084 locking pin. 1227320 index 6, or latest, qty. 325 distance bush. 1268583 ver 01,or latest, qty.166 pin. 1901864 ver 00,or latest, qty. 47 security plate. lw05114 alt - a, or latest, qty.088 security plate. 1268843 ver 01r,or latest, qty.029 security plate. 1356259 alt-05r,or latest, qty. 16.
Tender For corrigendum : provn of dry ration stores under ge 881 ews - sch a part-i (building work):-this schedule is not pre-priced by mes and the pre-priced rate indicated as "rs. 0.00" under col.5 signifies this fact only., construction of block of storage shed complete all as shown on drawings and as specified., total amount of sch a part - ii (site clearance/development work), total amount of sch a part - iii (internal electric supply work), total amount of sch a part - iv (protective work), total amount of sch a part - v (area drainage work), total amount of sch a part -vi (road, path and culvert work), total amount of sch a part -vii (external electric supply work), total amount of sch a part -viii (demolition/dismantling work), sch a part - ix (misc items of work) note : this schedule is not pre-priced by mes and the pre-priced rate indicated as "rs. 0.00" under col.5 signifies this fact only., double walled corrugated (dwc) pipe for cable protection with outer dia 50mm and inner dia 38mm including suitable size of coupler for connection of pipe complete all as specified and directed., point wiring for one light/fan point/call bell point controlled by one way switch 5 amp with 1.5 sqmm single core multi standed copper conductor frlsh insulated and unsheathed heavy duty cable in colour code including earth wire with cable of size 1.5 sqmm copper conductor frlsh insulated, drawn into and including concealed in pvc conduit of not less than 20mm dia and 1.5mm wall thickness (isi marked) terminated into annealed steel terminal boxes including modular plate and cover for mounting modular switch/ socket switches, sockets, fan regulators etc complete all as specified and directed., all as per srl item no. 12.00 above but for one 3 pin 5 amp socket on same board., all as per srl item no. 12.00 above but for one 3 pin 5 amp socket on independent board., earthing complete with galvanized steel earth plate electrode 600x600x6mm burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level connected with galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 15mm dia gi light grade protection pipe, 20mm dia gi medium grade watering pipe with funnel including charcoal, dust, salt, pcc m-15 type b1 in pit with angle iron (25x25x3)mm frame work with precast rcc 1:2:4 type b-1 cover reinforced with 8mm dia tmt bars @ 150mm c/c both ways and 12mm dia ms fabricated handle, test point etc. in and including light grade gi protection pipe 20mm bore up to 7.5m length for drawing in earth lead wire, all as shown in electric plate no. 3 of ssr part-i complete with necessary earth work in any type of soil, removal of soil to a distance not exc. 50m, testing on completion complete all as specified and directed.note:- on testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction., inverter led light fittings batten type, 1x20w led, 230v, complete with all accessories internally per wired including lithium lon battery with charging time 8 to 10 hours and back up time up to 4 hours and connecting up with pvc insulated and sheathed, 1100 v grade, flexible, multistranded copper conductor three core cable complete all as specified and directed., led street light/ security light fitting 35 watt, 230 v, ac, outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with ip 66 protection, including provision of gi bracket made of 40mm dia, gi pipe, 1.5m long, bend to shape, complete all as specified., mcb, spn, 240 volts, 40 to 63 amps,10ka, breaking capacity, complete all as specified., mcb, spn, 240 volts, 6 to 32 amps,10ka, brea
Tender For providing of integrated security surveillance system service - cctv camera item as per attached list; cctv camera item as per attached list; cctv camera item as per attached list; cctv camera item as per attached list; na; na; na; na; no
Tender For corrigendum : leasing out garhi rest house (non-functional) time limit for completion :120 days bid security a. for lump sum contracts : (i) with technical bid : - (ii) with financial bid : 2% of bid value b. for item rate/percentage contracts : (i) with technical bid : as specified in the tender notice (ii) with financial bid : cost of bid document : 2000/-
Tender For corrigendum : boating site sidhwan branch rd 96965-100300 (operate boating facility) time limit for completion :120 days bid security a. for lump sum contracts : (i) with technical bid : - (ii) with financial bid : 2% of bid value b. for item rate/percentage contracts : (i) with technical bid : as specified in the tender notice (ii) with financial bid : cost of bid document : 2000/-
Tender For supply of set of hardware item for m/s medha vande bharat bogie assembly as per annexure enclosed. set of hardware for vande bharat bogies i.e. (i)spmaet18bogie1074-security plate-a675uv2-70 no. (ii)spmaet18bogie1080-gasket for speed sensors-100 no. (iii)spmaet18bogie1081-set of hardware for front end cover machined-20 sets (iv)spmaet18bogie1082-set of hardware for bearing end pad-20 sets (v)spmaet18bogie1083- set of hardware for axle rear cover machined-20 sets